Mini Shell
/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
/* Do not edit directly, auto-generated from: */
/* Documentation/netlink/specs/dpll.yaml */
/* YNL-GEN uapi header */
#ifndef _LINUX_DPLL_H
#define _LINUX_DPLL_H
#define DPLL_FAMILY_NAME "dpll"
#define DPLL_FAMILY_VERSION 1
/**
* enum dpll_mode - working modes a dpll can support, differentiates if and how
* dpll selects one of its inputs to syntonize with it, valid values for
* DPLL_A_MODE attribute
* @DPLL_MODE_MANUAL: input can be only selected by sending a request to dpll
* @DPLL_MODE_AUTOMATIC: highest prio input pin auto selected by dpll
*/
enum dpll_mode {
DPLL_MODE_MANUAL = 1,
DPLL_MODE_AUTOMATIC,
/* private: */
__DPLL_MODE_MAX,
DPLL_MODE_MAX = (__DPLL_MODE_MAX - 1)
};
/**
* enum dpll_lock_status - provides information of dpll device lock status,
* valid values for DPLL_A_LOCK_STATUS attribute
* @DPLL_LOCK_STATUS_UNLOCKED: dpll was not yet locked to any valid input (or
* forced by setting DPLL_A_MODE to DPLL_MODE_DETACHED)
* @DPLL_LOCK_STATUS_LOCKED: dpll is locked to a valid signal, but no holdover
* available
* @DPLL_LOCK_STATUS_LOCKED_HO_ACQ: dpll is locked and holdover acquired
* @DPLL_LOCK_STATUS_HOLDOVER: dpll is in holdover state - lost a valid lock or
* was forced by disconnecting all the pins (latter possible only when dpll
* lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ, if dpll lock-state
* was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the dpll's lock-state shall remain
* DPLL_LOCK_STATUS_UNLOCKED)
*/
enum dpll_lock_status {
DPLL_LOCK_STATUS_UNLOCKED = 1,
DPLL_LOCK_STATUS_LOCKED,
DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
DPLL_LOCK_STATUS_HOLDOVER,
/* private: */
__DPLL_LOCK_STATUS_MAX,
DPLL_LOCK_STATUS_MAX = (__DPLL_LOCK_STATUS_MAX - 1)
};
#define DPLL_TEMP_DIVIDER 1000
/**
* enum dpll_type - type of dpll, valid values for DPLL_A_TYPE attribute
* @DPLL_TYPE_PPS: dpll produces Pulse-Per-Second signal
* @DPLL_TYPE_EEC: dpll drives the Ethernet Equipment Clock
*/
enum dpll_type {
DPLL_TYPE_PPS = 1,
DPLL_TYPE_EEC,
/* private: */
__DPLL_TYPE_MAX,
DPLL_TYPE_MAX = (__DPLL_TYPE_MAX - 1)
};
/**
* enum dpll_pin_type - defines possible types of a pin, valid values for
* DPLL_A_PIN_TYPE attribute
* @DPLL_PIN_TYPE_MUX: aggregates another layer of selectable pins
* @DPLL_PIN_TYPE_EXT: external input
* @DPLL_PIN_TYPE_SYNCE_ETH_PORT: ethernet port PHY's recovered clock
* @DPLL_PIN_TYPE_INT_OSCILLATOR: device internal oscillator
* @DPLL_PIN_TYPE_GNSS: GNSS recovered clock
*/
enum dpll_pin_type {
DPLL_PIN_TYPE_MUX = 1,
DPLL_PIN_TYPE_EXT,
DPLL_PIN_TYPE_SYNCE_ETH_PORT,
DPLL_PIN_TYPE_INT_OSCILLATOR,
DPLL_PIN_TYPE_GNSS,
/* private: */
__DPLL_PIN_TYPE_MAX,
DPLL_PIN_TYPE_MAX = (__DPLL_PIN_TYPE_MAX - 1)
};
/**
* enum dpll_pin_direction - defines possible direction of a pin, valid values
* for DPLL_A_PIN_DIRECTION attribute
* @DPLL_PIN_DIRECTION_INPUT: pin used as a input of a signal
* @DPLL_PIN_DIRECTION_OUTPUT: pin used to output the signal
*/
enum dpll_pin_direction {
DPLL_PIN_DIRECTION_INPUT = 1,
DPLL_PIN_DIRECTION_OUTPUT,
/* private: */
__DPLL_PIN_DIRECTION_MAX,
DPLL_PIN_DIRECTION_MAX = (__DPLL_PIN_DIRECTION_MAX - 1)
};
#define DPLL_PIN_FREQUENCY_1_HZ 1
#define DPLL_PIN_FREQUENCY_10_KHZ 10000
#define DPLL_PIN_FREQUENCY_77_5_KHZ 77500
#define DPLL_PIN_FREQUENCY_10_MHZ 10000000
/**
* enum dpll_pin_state - defines possible states of a pin, valid values for
* DPLL_A_PIN_STATE attribute
* @DPLL_PIN_STATE_CONNECTED: pin connected, active input of phase locked loop
* @DPLL_PIN_STATE_DISCONNECTED: pin disconnected, not considered as a valid
* input
* @DPLL_PIN_STATE_SELECTABLE: pin enabled for automatic input selection
*/
enum dpll_pin_state {
DPLL_PIN_STATE_CONNECTED = 1,
DPLL_PIN_STATE_DISCONNECTED,
DPLL_PIN_STATE_SELECTABLE,
/* private: */
__DPLL_PIN_STATE_MAX,
DPLL_PIN_STATE_MAX = (__DPLL_PIN_STATE_MAX - 1)
};
/**
* enum dpll_pin_capabilities - defines possible capabilities of a pin, valid
* flags on DPLL_A_PIN_CAPABILITIES attribute
* @DPLL_PIN_CAPABILITIES_DIRECTION_CAN_CHANGE: pin direction can be changed
* @DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE: pin priority can be changed
* @DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE: pin state can be changed
*/
enum dpll_pin_capabilities {
DPLL_PIN_CAPABILITIES_DIRECTION_CAN_CHANGE = 1,
DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE = 2,
DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE = 4,
};
#define DPLL_PHASE_OFFSET_DIVIDER 1000
enum dpll_a {
DPLL_A_ID = 1,
DPLL_A_MODULE_NAME,
DPLL_A_PAD,
DPLL_A_CLOCK_ID,
DPLL_A_MODE,
DPLL_A_MODE_SUPPORTED,
DPLL_A_LOCK_STATUS,
DPLL_A_TEMP,
DPLL_A_TYPE,
__DPLL_A_MAX,
DPLL_A_MAX = (__DPLL_A_MAX - 1)
};
enum dpll_a_pin {
DPLL_A_PIN_ID = 1,
DPLL_A_PIN_PARENT_ID,
DPLL_A_PIN_MODULE_NAME,
DPLL_A_PIN_PAD,
DPLL_A_PIN_CLOCK_ID,
DPLL_A_PIN_BOARD_LABEL,
DPLL_A_PIN_PANEL_LABEL,
DPLL_A_PIN_PACKAGE_LABEL,
DPLL_A_PIN_TYPE,
DPLL_A_PIN_DIRECTION,
DPLL_A_PIN_FREQUENCY,
DPLL_A_PIN_FREQUENCY_SUPPORTED,
DPLL_A_PIN_FREQUENCY_MIN,
DPLL_A_PIN_FREQUENCY_MAX,
DPLL_A_PIN_PRIO,
DPLL_A_PIN_STATE,
DPLL_A_PIN_CAPABILITIES,
DPLL_A_PIN_PARENT_DEVICE,
DPLL_A_PIN_PARENT_PIN,
DPLL_A_PIN_PHASE_ADJUST_MIN,
DPLL_A_PIN_PHASE_ADJUST_MAX,
DPLL_A_PIN_PHASE_ADJUST,
DPLL_A_PIN_PHASE_OFFSET,
DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET,
__DPLL_A_PIN_MAX,
DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
};
enum dpll_cmd {
DPLL_CMD_DEVICE_ID_GET = 1,
DPLL_CMD_DEVICE_GET,
DPLL_CMD_DEVICE_SET,
DPLL_CMD_DEVICE_CREATE_NTF,
DPLL_CMD_DEVICE_DELETE_NTF,
DPLL_CMD_DEVICE_CHANGE_NTF,
DPLL_CMD_PIN_ID_GET,
DPLL_CMD_PIN_GET,
DPLL_CMD_PIN_SET,
DPLL_CMD_PIN_CREATE_NTF,
DPLL_CMD_PIN_DELETE_NTF,
DPLL_CMD_PIN_CHANGE_NTF,
__DPLL_CMD_MAX,
DPLL_CMD_MAX = (__DPLL_CMD_MAX - 1)
};
#define DPLL_MCGRP_MONITOR "monitor"
#endif /* _LINUX_DPLL_H */
Zerion Mini Shell 1.0