Mini Shell
| Direktori : /usr/bin/ |
|
|
| Current File : //usr/bin/dracut |
#!/usr/bin/bash -p
#
# Generator script for a dracut initramfs
# Copyright 2005-2013 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# store for logging
unset BASH_ENV
unset GZIP
# Verify bash version, current minimum is 4
if ((BASH_VERSINFO[0] < 4)); then
printf -- 'You need at least Bash 4 to use dracut, sorry.' >&2
exit 1
fi
dracut_args=("$@")
# shellcheck disable=SC2155
readonly dracut_cmd=$(readlink -f "$0")
set -o pipefail
usage() {
[[ $sysroot_l ]] && dracutsysrootdir="$sysroot_l"
[[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
# shellcheck source=./dracut-version.sh
. "$dracutbasedir"/dracut-version.sh
fi
# 80x25 linebreak here ^
cat << EOF
Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]]
Version: $DRACUT_VERSION
Creates initial ramdisk images for preloading modules
-h, --help Display all options
If a [LIST] has multiple arguments, then you have to put these in quotes.
For example:
# dracut --add-drivers "module1 module2" ...
EOF
}
long_usage() {
[[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
# shellcheck source=./dracut-version.sh
. "$dracutbasedir"/dracut-version.sh
fi
# 80x25 linebreak here ^
cat << EOF
Usage: $dracut_cmd [OPTION]... [<initramfs> [<kernel-version>]]
Version: $DRACUT_VERSION
Creates initial ramdisk images for preloading modules
--kver [VERSION] Set kernel version to [VERSION].
-f, --force Overwrite existing initramfs file.
[OUTPUT_FILE] --rebuild
Append the current arguments to those with which the
input initramfs image was built. This option helps in
incrementally building the initramfs for testing.
If optional [OUTPUT_FILE] is not provided, the input
initramfs provided to rebuild will be used as output
file.
-a, --add [LIST] Add a space-separated list of dracut modules.
--force-add [LIST] Force to add a space-separated list of dracut modules
to the default set of modules, when -H is specified.
-o, --omit [LIST] Omit a space-separated list of dracut modules.
-m, --modules [LIST] Specify a space-separated list of dracut modules to
call when building the initramfs. Modules are located
in /usr/lib/dracut/modules.d.
This option forces dracut to only include the specified
dracut modules.
In most cases the --add option is what you want to use.
--add-drivers [LIST] Specify a space-separated list of kernel
modules to add to the initramfs.
--force-drivers [LIST]
Specify a space-separated list of kernel
modules to add to the initramfs and make sure they
are tried to be loaded via modprobe same as passing
rd.driver.pre=DRIVER kernel parameter.
--omit-drivers [LIST] Specify a space-separated list of kernel
modules not to add to the initramfs.
-d, --drivers [LIST] Specify a space-separated list of kernel modules to
exclusively include in the initramfs.
--filesystems [LIST] Specify a space-separated list of kernel filesystem
modules to exclusively include in the generic
initramfs.
-k, --kmoddir [DIR] Specify the directory where to look for kernel
modules.
--fwdir [DIR] Specify additional colon-separated list of directories
where to look for firmware files.
--libdirs [LIST] Specify a space-separated list of directories
where to look for libraries.
--kernel-only Only install kernel drivers and firmware files.
--no-kernel Do not install kernel drivers and firmware files.
--print-cmdline Print the kernel command line for the given disk layout.
--early-microcode Combine early microcode with ramdisk.
--no-early-microcode Do not combine early microcode with ramdisk.
--kernel-cmdline [PARAMETERS]
Specify default kernel command line parameters.
--strip Strip binaries in the initramfs.
--aggresive-strip Strip more than just debug symbol and sections,
for a smaller initramfs build. The --strip option must
also be specified.
--nostrip Do not strip binaries in the initramfs.
--hardlink Hardlink files in the initramfs.
--nohardlink Do not hardlink files in the initramfs.
--prefix [DIR] Prefix initramfs files with [DIR].
--noprefix Do not prefix initramfs files.
--mdadmconf Include local /etc/mdadm.conf file.
--nomdadmconf Do not include local /etc/mdadm.conf file.
--lvmconf Include local /etc/lvm/lvm.conf file.
--nolvmconf Do not include local /etc/lvm/lvm.conf file.
--fscks [LIST] Add a space-separated list of fsck helpers.
--nofscks Inhibit installation of any fsck helpers.
--ro-mnt Mount / and /usr read-only by default.
-h, --help This message.
--debug Output debug information of the build process.
--profile Output profile information of the build process.
-L, --stdlog [0-6] Specify logging level (to standard error)
0 - suppress any messages
1 - only fatal errors
2 - all errors
3 - warnings
4 - info
5 - debug info (here starts lots of output)
6 - trace info (and even more)
-v, --verbose Increase verbosity level.
-q, --quiet Decrease verbosity level.
-c, --conf [FILE] Specify configuration file to use.
Default: /etc/dracut.conf
--confdir [DIR] Specify configuration directory to use *.conf files
from. Default: /etc/dracut.conf.d
--tmpdir [DIR] Temporary directory to be used instead of default
${TMPDIR:-/var/tmp}.
-r, --sysroot [DIR] Specify sysroot directory to collect files from.
-l, --local Local mode. Use modules from the current working
directory instead of the system-wide installed in
/usr/lib/dracut/modules.d.
Useful when running dracut from a git checkout.
-H, --hostonly Host-only mode: Install only what is needed for
booting the local host instead of a generic host.
-N, --no-hostonly Disables host-only mode.
--hostonly-mode [MODE]
Specify the host-only mode to use. [MODE] could be
one of "sloppy" or "strict". "sloppy" mode is used
by default.
In "sloppy" host-only mode, extra drivers and modules
will be installed, so minor hardware change won't make
the image unbootable (e.g. changed keyboard), and the
image is still portable among similar hosts.
With "strict" mode enabled, anything not necessary
for booting the local host in its current state will
not be included, and modules may do some extra job
to save more space. Minor change of hardware or
environment could make the image unbootable.
DO NOT use "strict" mode unless you know what you
are doing.
--hostonly-cmdline Store kernel command line arguments needed
in the initramfs.
--no-hostonly-cmdline Do not store kernel command line arguments needed
in the initramfs.
--no-hostonly-default-device
Do not generate implicit host devices like root,
swap, fstab, etc. Use "--mount" or "--add-device"
to explicitly add devices as needed.
--hostonly-i18n Install only needed keyboard and font files according
to the host configuration (default).
--no-hostonly-i18n Install all keyboard and font files available.
--hostonly-nics [LIST]
Only enable listed NICs in the initramfs. The list can
be empty, so other modules can install only the
necessary network drivers.
--persistent-policy [POLICY]
Use [POLICY] to address disks and partitions.
POLICY can be any directory name found in /dev/disk.
E.g. "by-uuid", "by-label"
--fstab Use /etc/fstab to determine the root device.
--add-fstab [FILE] Add file to the initramfs fstab.
--mount "[DEV] [MP] [FSTYPE] [FSOPTS]"
Mount device [DEV] on mountpoint [MP] with filesystem
[FSTYPE] and options [FSOPTS] in the initramfs.
--mount "[MP]" Same as above, but [DEV], [FSTYPE] and [FSOPTS] are
determined by looking at the current mounts.
--add-device "[DEV]" Bring up [DEV] in initramfs.
-i, --include [SOURCE] [TARGET]
Include the files in the SOURCE directory into the
Target directory in the final initramfs.
If SOURCE is a file, it will be installed to TARGET
in the final initramfs.
-I, --install [LIST] Install the space separated list of files into the
initramfs.
--install-optional [LIST]
Install the space separated list of files into the
initramfs, if they exist.
--gzip Compress the generated initramfs using gzip.
This will be done by default, unless another
compression option or --no-compress is passed.
--bzip2 Compress the generated initramfs using bzip2.
Make sure your kernel has bzip2 decompression support
compiled in, otherwise you will not be able to boot.
--lzma Compress the generated initramfs using lzma.
Make sure your kernel has lzma support compiled in,
otherwise you will not be able to boot.
--xz Compress the generated initramfs using xz.
Make sure that your kernel has xz support compiled
in, otherwise you will not be able to boot.
--lzo Compress the generated initramfs using lzop.
Make sure that your kernel has lzo support compiled
in, otherwise you will not be able to boot.
--lz4 Compress the generated initramfs using lz4.
Make sure that your kernel has lz4 support compiled
in, otherwise you will not be able to boot.
--zstd Compress the generated initramfs using Zstandard.
Make sure that your kernel has zstd support compiled
in, otherwise you will not be able to boot.
--compress [COMPRESSION]
Compress the generated initramfs with the
passed compression program. Make sure your kernel
knows how to decompress the generated initramfs,
otherwise you will not be able to boot.
--no-compress Do not compress the generated initramfs. This will
override any other compression options.
--squash-compressor [COMPRESSION]
Specify the compressor and compressor specific options
used by mksquashfs if squash module is called when
building the initramfs.
--enhanced-cpio Attempt to reflink cpio file data using dracut-cpio.
--list-modules List all available dracut modules.
-M, --show-modules Print included module's name to standard output during
build.
--keep Keep the temporary initramfs for debugging purposes.
--printsize Print out the module install size.
--sshkey [SSHKEY] Add SSH key to initramfs (use with ssh-client module).
--logfile [FILE] Logfile to use (overrides configuration setting).
--reproducible Create reproducible images.
--no-reproducible Do not create reproducible images.
--loginstall [DIR] Log all files installed from the host to [DIR].
--uefi Create an UEFI executable with the kernel cmdline and
kernel combined.
--no-uefi Disables UEFI mode.
--no-machineid Affects the default output filename of the UEFI
executable, discarding the <MACHINE_ID> part.
--uefi-stub [FILE] Use the UEFI stub [FILE] to create an UEFI executable.
--uefi-splash-image [FILE]
Use [FILE] as a splash image when creating an UEFI
executable. Requires bitmap (.bmp) image format.
--kernel-image [FILE] Location of the kernel image.
--sbat [PARAMETERS] The SBAT parameters to be added to .sbat.
The string "sbat,1,SBAT Version,sbat,1,
https://github.com/rhboot/shim/blob/main/SBAT.md" is
already added by default.
--regenerate-all Regenerate all initramfs images at the default location
for the kernel versions found on the system.
-p, --parallel Use parallel processing if possible (currently only
supported --regenerate-all)
images simultaneously.
--version Display version.
If [LIST] has multiple arguments, then you have to put these in quotes.
For example:
# dracut --add-drivers "module1 module2" ...
EOF
}
long_version() {
[[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
# shellcheck source=./dracut-version.sh
. "$dracutbasedir"/dracut-version.sh
fi
echo "dracut $DRACUT_VERSION"
}
# Fills up host_devs stack variable and makes sure there are no duplicates
push_host_devs() {
local _dev
for _dev in "$@"; do
[[ " ${host_devs[*]} " == *" $_dev "* ]] && return
host_devs+=("$_dev")
done
}
# Little helper function for reading args from the commandline.
# it automatically handles -a b and -a=b variants, and returns 1 if
# we need to shift $3.
read_arg() {
# $1 = arg name
# $2 = arg value
# $3 = arg parameter
local rematch='^[^=]*=(.*)$'
if [[ $2 =~ $rematch ]]; then
read -r "$1" <<< "${BASH_REMATCH[1]}"
else
read -r "$1" <<< "$3"
# There is no way to shift our callers args, so
# return 1 to indicate they should do it instead.
return 1
fi
}
check_conf_file() {
if grep -H -e '^[^#]*[+]=\("[^ ]\|.*[^ ]"\)' "$@"; then
printf '\ndracut: WARNING: <key>+=" <values> ": <values> should have surrounding white spaces!\n' >&2
printf 'dracut: WARNING: This will lead to unwanted side effects! Please fix the configuration file.\n\n' >&2
fi
}
dropindirs_sort() {
local suffix=$1
shift
local -a files
local f d
for d in "$@"; do
for i in "$d/"*"$suffix"; do
if [[ -e $i ]]; then
printf "%s\n" "${i##*/}"
fi
done
done | sort -Vu | {
readarray -t files
for f in "${files[@]}"; do
for d in "$@"; do
if [[ -e "$d/$f" ]]; then
printf "%s\n" "$d/$f"
continue 2
fi
done
done
}
}
rearrange_params() {
# Workaround -i, --include taking 2 arguments
newat=()
for i in "$@"; do
if [[ $i == "-i" ]] || [[ $i == "--include" ]]; then
newat+=("++include") # Replace --include by ++include
else
newat+=("$i")
fi
done
set -- "${newat[@]}" # Set new $@
TEMP=$(
unset POSIXLY_CORRECT
getopt \
-o "a:m:o:d:I:k:c:r:L:fvqlHhMNp" \
--long kver: \
--long add: \
--long force-add: \
--long add-drivers: \
--long force-drivers: \
--long omit-drivers: \
--long modules: \
--long omit: \
--long drivers: \
--long filesystems: \
--long install: \
--long install-optional: \
--long fwdir: \
--long libdirs: \
--long fscks: \
--long add-fstab: \
--long mount: \
--long device: \
--long add-device: \
--long nofscks \
--long ro-mnt \
--long kmoddir: \
--long conf: \
--long confdir: \
--long tmpdir: \
--long sysroot: \
--long stdlog: \
--long compress: \
--long squash-compressor: \
--long prefix: \
--long rebuild: \
--long force \
--long kernel-only \
--long no-kernel \
--long print-cmdline \
--long kernel-cmdline: \
--long strip \
--long aggresive-strip \
--long nostrip \
--long hardlink \
--long nohardlink \
--long noprefix \
--long mdadmconf \
--long nomdadmconf \
--long lvmconf \
--long nolvmconf \
--long debug \
--long profile \
--long sshkey: \
--long logfile: \
--long verbose \
--long quiet \
--long local \
--long hostonly \
--long host-only \
--long no-hostonly \
--long no-host-only \
--long hostonly-mode: \
--long hostonly-cmdline \
--long no-hostonly-cmdline \
--long no-hostonly-default-device \
--long persistent-policy: \
--long fstab \
--long help \
--long bzip2 \
--long lzma \
--long xz \
--long lzo \
--long lz4 \
--long zstd \
--long no-compress \
--long gzip \
--long enhanced-cpio \
--long list-modules \
--long show-modules \
--long keep \
--long printsize \
--long regenerate-all \
--long parallel \
--long noimageifnotneeded \
--long early-microcode \
--long no-early-microcode \
--long reproducible \
--long no-reproducible \
--long loginstall: \
--long uefi \
--long no-uefi \
--long uefi-stub: \
--long uefi-splash-image: \
--long kernel-image: \
--long sbat: \
--long no-hostonly-i18n \
--long hostonly-i18n \
--long hostonly-nics: \
--long no-machineid \
--long version \
-- "$@"
)
# shellcheck disable=SC2181
if (($? != 0)); then
usage
exit 1
fi
}
verbosity_mod_l=0
unset kernel
unset outfile
rearrange_params "$@"
eval set -- "$TEMP"
# parse command line args to check if '--rebuild' option is present
unset append_args_l
unset rebuild_file
while :; do
if [ "$1" == "--" ]; then
shift
break
fi
if [ "$1" == "--rebuild" ]; then
append_args_l="yes"
rebuild_file="$2"
if [ ! -e "$rebuild_file" ]; then
echo "Image file '$rebuild_file', for rebuild, does not exist!"
exit 1
fi
abs_rebuild_file=$(readlink -f "$rebuild_file") && rebuild_file="$abs_rebuild_file"
shift
continue
fi
shift
done
# get output file name and kernel version from command line arguments
while (($# > 0)); do
case ${1%%=*} in
++include)
shift 2
;;
*)
if ! [[ ${outfile+x} ]]; then
outfile=$1
elif ! [[ ${kernel+x} ]]; then
kernel=$1
else
printf "\nUnknown arguments: %s\n\n" "$*" >&2
usage
exit 1
fi
;;
esac
shift
done
# extract input image file provided with rebuild option to get previous parameters, if any
if [[ $append_args_l == "yes" ]]; then
unset rebuild_param
# determine resultant file
if ! [[ $outfile ]]; then
outfile=$rebuild_file
fi
if ! rebuild_param=$(lsinitrd "$rebuild_file" '*lib/dracut/build-parameter.txt'); then
echo "Image '$rebuild_file' has no rebuild information stored"
exit 1
fi
# prepend previous parameters to current command line args
if [[ $rebuild_param ]]; then
TEMP="$rebuild_param $TEMP"
eval set -- "$TEMP"
rearrange_params "$@"
fi
fi
unset PARMS_TO_STORE
PARMS_TO_STORE=""
eval set -- "$TEMP"
while :; do
if [[ $1 != "--" ]] && [[ $1 != "--rebuild" ]]; then
PARMS_TO_STORE+=" $1"
fi
case $1 in
--kver)
kernel="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
-a | --add)
add_dracutmodules_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--force-add)
force_add_dracutmodules_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--add-drivers)
add_drivers_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--force-drivers)
force_drivers_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--omit-drivers)
omit_drivers_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
-m | --modules)
dracutmodules_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
-o | --omit)
omit_dracutmodules_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
-d | --drivers)
drivers_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--filesystems)
filesystems_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
-I | --install)
install_items_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--install-optional)
install_optional_items_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--fwdir)
fw_dir_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--libdirs)
libdirs_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--fscks)
fscks_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--add-fstab)
add_fstab_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--mount)
fstab_lines+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--add-device | --device)
add_device_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--kernel-cmdline)
kernel_cmdline_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--nofscks) nofscks_l="yes" ;;
--ro-mnt) ro_mnt_l="yes" ;;
-k | --kmoddir)
drivers_dir_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
-c | --conf)
conffile="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--confdir)
confdir="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--tmpdir)
tmpdir_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
-r | --sysroot)
sysroot_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
-L | --stdlog)
stdloglvl_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--compress)
compress_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--squash-compressor)
squash_compress_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--prefix)
prefix_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--loginstall)
loginstall_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--rebuild)
if [[ $rebuild_file == "$outfile" ]]; then
force=yes
fi
shift
;;
-f | --force) force=yes ;;
--kernel-only)
kernel_only="yes"
no_kernel="no"
;;
--no-kernel)
kernel_only="no"
no_kernel="yes"
;;
--print-cmdline)
print_cmdline="yes"
hostonly_l="yes"
kernel_only="yes"
no_kernel="yes"
;;
--early-microcode)
early_microcode_l="yes"
;;
--no-early-microcode)
early_microcode_l="no"
;;
--strip) do_strip_l="yes" ;;
--aggresive-strip) aggresive_strip_l="yes" ;;
--nostrip) do_strip_l="no" ;;
--hardlink) do_hardlink_l="yes" ;;
--nohardlink) do_hardlink_l="no" ;;
--noprefix) prefix_l="/" ;;
--mdadmconf) mdadmconf_l="yes" ;;
--nomdadmconf) mdadmconf_l="no" ;;
--lvmconf) lvmconf_l="yes" ;;
--nolvmconf) lvmconf_l="no" ;;
--debug) debug="yes" ;;
--profile) profile="yes" ;;
--sshkey)
sshkey="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--logfile)
logfile_l="$2"
shift
;;
-v | --verbose) ((verbosity_mod_l++)) ;;
-q | --quiet) ((verbosity_mod_l--)) ;;
-l | --local)
allowlocal="yes"
[[ -f "$(readlink -f "${0%/*}")/dracut-init.sh" ]] \
&& dracutbasedir="$(readlink -f "${0%/*}")"
;;
-H | --hostonly | --host-only)
hostonly_l="yes"
;;
-N | --no-hostonly | --no-host-only)
hostonly_l="no"
;;
--hostonly-mode)
hostonly_mode_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--hostonly-cmdline)
hostonly_cmdline_l="yes"
;;
--hostonly-i18n)
i18n_install_all_l="no"
;;
--hostonly-nics)
hostonly_nics_l+=("$2")
PARMS_TO_STORE+=" '$2'"
shift
;;
--no-hostonly-i18n)
i18n_install_all_l="yes"
;;
--no-hostonly-cmdline)
hostonly_cmdline_l="no"
;;
--no-hostonly-default-device)
hostonly_default_device="no"
;;
--persistent-policy)
persistent_policy_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--fstab) use_fstab_l="yes" ;;
-h | --help)
long_usage
exit 1
;;
--bzip2) compress_l="bzip2" ;;
--lzma) compress_l="lzma" ;;
--xz) compress_l="xz" ;;
--lzo) compress_l="lzo" ;;
--lz4) compress_l="lz4" ;;
--zstd) compress_l="zstd" ;;
--no-compress) _no_compress_l="cat" ;;
--gzip) compress_l="gzip" ;;
--enhanced-cpio) enhanced_cpio_l="yes" ;;
--list-modules) do_list="yes" ;;
-M | --show-modules)
show_modules_l="yes"
;;
--keep) keep="yes" ;;
--printsize) printsize="yes" ;;
--regenerate-all) regenerate_all_l="yes" ;;
-p | --parallel) parallel_l="yes" ;;
--noimageifnotneeded) noimageifnotneeded="yes" ;;
--reproducible) reproducible_l="yes" ;;
--no-reproducible) reproducible_l="no" ;;
--uefi) uefi_l="yes" ;;
--no-uefi) uefi_l="no" ;;
--uefi-stub)
uefi_stub_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--uefi-splash-image)
uefi_splash_image_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--kernel-image)
kernel_image_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--sbat)
sbat_l="$2"
PARMS_TO_STORE+=" '$2'"
shift
;;
--no-machineid)
machine_id_l="no"
;;
--version)
long_version
exit 1
;;
--)
shift
break
;;
*) # should not even reach this point
printf "\n!Unknown option: '%s'\n\n" "$1" >&2
usage
exit 1
;;
esac
shift
done
# getopt cannot handle multiple arguments, so just handle "-I,--include"
# the old fashioned way
while (($# > 0)); do
if [ "${1%%=*}" == "++include" ]; then
include_src+=("$2")
include_target+=("$3")
PARMS_TO_STORE+=" --include '$2' '$3'"
shift 2
fi
shift
done
[[ $sysroot_l ]] && dracutsysrootdir="$sysroot_l"
export LC_ALL=C
export LANG=C
unset LC_MESSAGES
unset LC_CTYPE
unset LD_LIBRARY_PATH
unset LD_PRELOAD
unset GREP_OPTIONS
export DRACUT_LOG_LEVEL=warning
[[ $debug ]] && {
export DRACUT_LOG_LEVEL=debug
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]-}): '
set -x
}
[[ $profile ]] && {
export PS4='+ $(date "+%s.%N") ${BASH_SOURCE}@${LINENO}: '
set -x
debug=yes
}
[[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut
# if we were not passed a config file, try the default one
if [[ -z $conffile ]]; then
if [[ $allowlocal ]]; then
conffile="$dracutbasedir/dracut.conf"
else
conffile="$dracutsysrootdir/etc/dracut.conf"
fi
elif [[ ! -e $conffile ]]; then
printf "%s\n" "dracut: Configuration file '$conffile' not found." >&2
exit 1
fi
if [[ -z $confdir ]]; then
if [[ $allowlocal ]]; then
confdir="$dracutbasedir/dracut.conf.d"
else
confdir="$dracutsysrootdir/etc/dracut.conf.d"
fi
elif [[ ! -d $confdir ]]; then
printf "%s\n" "dracut: Configuration directory '$confdir' not found." >&2
exit 1
fi
# source our config file
if [[ -f $conffile ]]; then
check_conf_file "$conffile"
# shellcheck disable=SC1090
. "$conffile"
fi
# source our config dir
for f in $(dropindirs_sort ".conf" "$confdir" "$dracutbasedir/dracut.conf.d"); do
check_conf_file "$f"
# shellcheck disable=SC1090
[[ -e $f ]] && . "$f"
done
# regenerate_all shouldn't be set in conf files
regenerate_all=$regenerate_all_l
if [[ $parallel_l == "yes" ]]; then
parallel=yes
fi
if [[ $regenerate_all == "yes" ]]; then
ret=0
if [[ $kernel ]]; then
printf -- "--regenerate-all cannot be called with a kernel version\n" >&2
exit 1
fi
if [[ $outfile ]]; then
printf -- "--regenerate-all cannot be called with a image file\n" >&2
exit 1
fi
((len = ${#dracut_args[@]}))
for ((i = 0; i < len; i++)); do
case ${dracut_args[$i]} in
--regenerate-all | --parallel)
unset dracut_args["$i"]
;;
esac
done
cd "$dracutsysrootdir"/lib/modules || exit 1
if [[ $parallel != "yes" ]]; then
for i in *; do
[[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue
"$dracut_cmd" --kver="$i" "${dracut_args[@]}"
((ret += $?))
done
else
for i in *; do
[[ -f $i/modules.dep ]] || [[ -f $i/modules.dep.bin ]] || continue
"$dracut_cmd" --kver="$i" "${dracut_args[@]}" &
done
while true; do
wait -n
wst=$?
if [[ $wst == 127 ]]; then
break
else
((ret += wst))
fi
done
fi
exit "$ret"
fi
if ! [[ $kernel ]]; then
kernel=$(uname -r)
fi
DRACUT_PATH=${DRACUT_PATH:-/sbin /bin /usr/sbin /usr/bin}
for i in $DRACUT_PATH; do
rl=$i
if [ -L "$dracutsysrootdir$i" ]; then
rl=$(readlink -f "$dracutsysrootdir$i")
fi
rl="${rl#$dracutsysrootdir}"
if [[ $NPATH != *:$rl* ]]; then
NPATH+=":$rl"
fi
done
[[ -z $dracutsysrootdir ]] && export PATH="${NPATH#:}"
unset NPATH
export SYSTEMCTL=${SYSTEMCTL:-systemctl}
# these options add to the stuff in the config file
((${#add_dracutmodules_l[@]})) && add_dracutmodules+=" ${add_dracutmodules_l[*]} "
((${#omit_dracutmodules_l[@]})) && omit_dracutmodules+=" ${omit_dracutmodules_l[*]} "
((${#force_add_dracutmodules_l[@]})) && force_add_dracutmodules+=" ${force_add_dracutmodules_l[*]} "
((${#fscks_l[@]})) && fscks+=" ${fscks_l[*]} "
((${#add_fstab_l[@]})) && add_fstab+=" ${add_fstab_l[*]} "
((${#install_items_l[@]})) && install_items+=" ${install_items_l[*]} "
((${#install_optional_items_l[@]})) && install_optional_items+=" ${install_optional_items_l[*]} "
((${#hostonly_nics_l[@]})) && hostonly_nics+=" ${hostonly_nics_l[*]} "
# these options override the stuff in the config file
((${#dracutmodules_l[@]})) && dracutmodules="${dracutmodules_l[*]}"
((${#filesystems_l[@]})) && filesystems="${filesystems_l[*]}"
((${#fw_dir_l[@]})) && fw_dir="${fw_dir_l[*]}"
((${#libdirs_l[@]})) && libdirs="${libdirs_l[*]}"
[[ $stdloglvl_l ]] && stdloglvl=$stdloglvl_l
[[ ! $stdloglvl ]] && stdloglvl=4
stdloglvl=$((stdloglvl + verbosity_mod_l))
((stdloglvl > 6)) && stdloglvl=6
((stdloglvl < 0)) && stdloglvl=0
[[ $drivers_dir_l ]] && drivers_dir=$drivers_dir_l
[[ $do_strip_l ]] && do_strip=$do_strip_l
[[ $do_strip ]] || do_strip=yes
[[ $aggresive_strip_l ]] && aggresive_strip=$aggresive_strip_l
[[ $do_hardlink_l ]] && do_hardlink=$do_hardlink_l
[[ $do_hardlink ]] || do_hardlink=yes
[[ $prefix_l ]] && prefix=$prefix_l
[[ $prefix == "/" ]] && unset prefix
[[ $hostonly_l ]] && hostonly=$hostonly_l
[[ $hostonly_cmdline_l ]] && hostonly_cmdline=$hostonly_cmdline_l
[[ $hostonly_mode_l ]] && hostonly_mode=$hostonly_mode_l
[[ $hostonly == "yes" ]] && ! [[ $hostonly_cmdline ]] && hostonly_cmdline="yes"
# shellcheck disable=SC2034
[[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l
# shellcheck disable=SC2034
[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
[[ $use_fstab_l ]] && use_fstab=$use_fstab_l
[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
[[ $lvmconf_l ]] && lvmconf=$lvmconf_l
[[ $dracutbasedir ]] || dracutbasedir="$dracutsysrootdir"/usr/lib/dracut
[[ $fw_dir ]] || {
fw_path_para=$(< /sys/module/firmware_class/parameters/path)
fw_dir="${fw_path_para:+$dracutsysrootdir$fw_path_para:}$dracutsysrootdir/lib/firmware/updates/$kernel:$dracutsysrootdir/lib/firmware/updates:$dracutsysrootdir/lib/firmware/$kernel:$dracutsysrootdir/lib/firmware"
}
[[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
[[ $tmpdir ]] || tmpdir="$TMPDIR"
[[ $tmpdir ]] || tmpdir="$dracutsysrootdir"/var/tmp
[[ $INITRD_COMPRESS ]] && compress=$INITRD_COMPRESS
[[ $compress_l ]] && compress=$compress_l
[[ $squash_compress_l ]] && squash_compress=$squash_compress_l
[[ $enhanced_cpio_l ]] && enhanced_cpio=$enhanced_cpio_l
[[ $show_modules_l ]] && show_modules=$show_modules_l
[[ $nofscks_l ]] && nofscks="yes"
[[ $ro_mnt_l ]] && ro_mnt="yes"
[[ $early_microcode_l ]] && early_microcode=$early_microcode_l
[[ $early_microcode ]] || early_microcode=yes
[[ $early_microcode_image_dir ]] || early_microcode_image_dir=('/boot')
[[ $early_microcode_image_name ]] \
|| early_microcode_image_name=('intel-uc.img' 'intel-ucode.img' 'amd-uc.img' 'amd-ucode.img' 'early_ucode.cpio' 'microcode.cpio')
[[ $logfile_l ]] && logfile="$logfile_l"
[[ $reproducible_l ]] && reproducible="$reproducible_l"
[[ $loginstall_l ]] && loginstall="$loginstall_l"
[[ $uefi_l ]] && uefi=$uefi_l
[[ $uefi_stub_l ]] && uefi_stub="$uefi_stub_l"
[[ $uefi_splash_image_l ]] && uefi_splash_image="$uefi_splash_image_l"
[[ $kernel_image_l ]] && kernel_image="$kernel_image_l"
[[ $sbat_l ]] && sbat="$sbat_l"
[[ $machine_id_l ]] && machine_id="$machine_id_l"
if ! [[ $outfile ]]; then
if [[ $machine_id != "no" ]]; then
if [[ -d "$dracutsysrootdir"/efi/Default ]] \
|| [[ -d "$dracutsysrootdir"/boot/Default ]] \
|| [[ -d "$dracutsysrootdir"/boot/efi/Default ]]; then
MACHINE_ID="Default"
elif [[ -f "$dracutsysrootdir"/etc/machine-id ]]; then
read -r MACHINE_ID < "$dracutsysrootdir"/etc/machine-id
else
MACHINE_ID="Default"
fi
fi
if [[ $uefi == "yes" ]]; then
# shellcheck disable=SC2154
if [[ -n $uefi_secureboot_key && -z $uefi_secureboot_cert ]] || [[ -z $uefi_secureboot_key && -n $uefi_secureboot_cert ]]; then
printf "%s\n" "dracut: Need 'uefi_secureboot_key' and 'uefi_secureboot_cert' both to be set." >&2
exit 1
fi
if [[ -n $uefi_secureboot_key && -n $uefi_secureboot_cert ]] && ! command -v sbsign &> /dev/null; then
printf "%s\n" "dracut: Need 'sbsign' to create a signed UEFI executable." >&2
exit 1
fi
BUILD_ID=$(cat "$dracutsysrootdir"/etc/os-release "$dracutsysrootdir"/usr/lib/os-release \
| while read -r line || [[ $line ]]; do
[[ $line =~ BUILD_ID\=* ]] && eval "$line" && echo "$BUILD_ID" && break
done)
if [[ -z $dracutsysrootdir ]]; then
if [[ -d /efi ]] && mountpoint -q /efi; then
efidir=/efi/EFI
else
efidir=/boot/EFI
if [[ -d /boot/efi/EFI ]]; then
efidir=/boot/efi/EFI
fi
fi
else
efidir=/boot/EFI
if [[ -d $dracutsysrootdir/boot/efi/EFI ]]; then
efidir=/boot/efi/EFI
fi
fi
mkdir -p "$dracutsysrootdir$efidir/Linux"
outfile="$dracutsysrootdir$efidir/Linux/linux-$kernel${MACHINE_ID:+-${MACHINE_ID}}${BUILD_ID:+-${BUILD_ID}}.efi"
else
if [[ -d "$dracutsysrootdir"/efi/loader/entries || -L "$dracutsysrootdir"/efi/loader/entries ]] \
&& [[ $MACHINE_ID ]] \
&& [[ -d "$dracutsysrootdir"/efi/${MACHINE_ID} || -L "$dracutsysrootdir"/efi/${MACHINE_ID} ]]; then
outfile="$dracutsysrootdir/efi/${MACHINE_ID}/${kernel}/initrd"
elif [[ -d "$dracutsysrootdir"/boot/loader/entries || -L "$dracutsysrootdir"/boot/loader/entries ]] \
&& [[ $MACHINE_ID ]] \
&& [[ -d "$dracutsysrootdir"/boot/${MACHINE_ID} || -L "$dracutsysrootdir"/boot/${MACHINE_ID} ]]; then
outfile="$dracutsysrootdir/boot/${MACHINE_ID}/${kernel}/initrd"
elif [[ -d "$dracutsysrootdir"/boot/efi/loader/entries || -L "$dracutsysrootdir"/boot/efi/loader/entries ]] \
&& [[ $MACHINE_ID ]] \
&& [[ -d "$dracutsysrootdir"/boot/efi/${MACHINE_ID} || -L "$dracutsysrootdir"/boot/efi/${MACHINE_ID} ]]; then
outfile="$dracutsysrootdir/boot/efi/${MACHINE_ID}/${kernel}/initrd"
elif [[ -f "$dracutsysrootdir"/lib/modules/${kernel}/initrd ]]; then
outfile="$dracutsysrootdir/lib/modules/${kernel}/initrd"
elif [[ -e $dracutsysrootdir/boot/vmlinuz-${kernel} ]]; then
outfile="$dracutsysrootdir/boot/initramfs-${kernel}.img"
elif [[ -z $dracutsysrootdir ]] \
&& [[ $MACHINE_ID ]] \
&& mountpoint -q /efi; then
outfile="/efi/${MACHINE_ID}/${kernel}/initrd"
elif [[ -z $dracutsysrootdir ]] \
&& [[ $MACHINE_ID ]] \
&& mountpoint -q /boot/efi; then
outfile="/boot/efi/${MACHINE_ID}/${kernel}/initrd"
else
outfile="$dracutsysrootdir/boot/initramfs-${kernel}.img"
fi
fi
fi
# eliminate IFS hackery when messing with fw_dir
export DRACUT_FIRMWARE_PATH=${fw_dir// /:}
fw_dir=${fw_dir//:/ }
# check for logfile and try to create one if it doesn't exist
if [[ -n $logfile ]]; then
if [[ ! -f $logfile ]]; then
if touch "$logfile"; then
printf "%s\n" "dracut: touch $logfile failed." >&2
fi
fi
fi
# handle compression options.
DRACUT_COMPRESS_BZIP2=${DRACUT_COMPRESS_BZIP2:-bzip2}
DRACUT_COMPRESS_LBZIP2=${DRACUT_COMPRESS_LBZIP2:-lbzip2}
DRACUT_COMPRESS_LZMA=${DRACUT_COMPRESS_LZMA:-lzma}
DRACUT_COMPRESS_XZ=${DRACUT_COMPRESS_XZ:-xz}
DRACUT_COMPRESS_GZIP=${DRACUT_COMPRESS_GZIP:-gzip}
DRACUT_COMPRESS_PIGZ=${DRACUT_COMPRESS_PIGZ:-pigz}
DRACUT_COMPRESS_LZOP=${DRACUT_COMPRESS_LZOP:-lzop}
DRACUT_COMPRESS_ZSTD=${DRACUT_COMPRESS_ZSTD:-zstd}
DRACUT_COMPRESS_LZ4=${DRACUT_COMPRESS_LZ4:-lz4}
DRACUT_COMPRESS_CAT=${DRACUT_COMPRESS_CAT:-cat}
if [[ $_no_compress_l == "$DRACUT_COMPRESS_CAT" ]]; then
compress="$DRACUT_COMPRESS_CAT"
fi
[[ $hostonly == yes ]] && hostonly="-h"
[[ $hostonly != "-h" ]] && unset hostonly
case $hostonly_mode in
'')
[[ $hostonly ]] && hostonly_mode="sloppy"
;;
sloppy | strict)
if [[ ! $hostonly ]]; then
unset hostonly_mode
fi
;;
*)
printf "%s\n" "dracut: Invalid hostonly mode '$hostonly_mode'." >&2
exit 1
;;
esac
[[ $reproducible == yes ]] && DRACUT_REPRODUCIBLE=1
case "${drivers_dir}" in
'' | *lib/modules/${kernel} | *lib/modules/${kernel}/) ;;
*)
[[ "$DRACUT_KMODDIR_OVERRIDE" ]] || {
printf "%s\n" 'dracut: -k/--kmoddir path must contain "lib/modules" as a parent of your kernel module directory,'
printf "%s\n" "dracut: or modules may not be placed in the correct location inside the initramfs."
printf "%s\n" "dracut: was given: ${drivers_dir}"
printf "%s\n" "dracut: expected: $(dirname "${drivers_dir}")/lib/modules/${kernel}"
printf "%s\n" "dracut: Please move your modules into the correct directory structure and pass the new location,"
printf "%s\n" "dracut: or set DRACUT_KMODDIR_OVERRIDE=1 to ignore this check."
exit 1
}
;;
esac
# shellcheck disable=SC2155
readonly TMPDIR="$(realpath -e "$tmpdir")"
[ -d "$TMPDIR" ] || {
printf "%s\n" "dracut: Invalid tmpdir '$tmpdir'." >&2
exit 1
}
if findmnt --raw -n --target "$tmpdir" --output=options | grep -q noexec; then
[[ $debug == yes ]] && printf "%s\n" "dracut: Tmpdir '$tmpdir' is mounted with 'noexec'."
noexec=1
fi
# shellcheck disable=SC2155
readonly DRACUT_TMPDIR="$(mktemp -p "$TMPDIR/" -d -t dracut.XXXXXX)"
[ -d "$DRACUT_TMPDIR" ] || {
printf "%s\n" "dracut: mktemp -p '$TMPDIR/' -d -t dracut.XXXXXX failed." >&2
exit 1
}
# Cache file used to optimize get_maj_min()
declare -x -r get_maj_min_cache_file="${DRACUT_TMPDIR}/majmin_cache"
: > "$get_maj_min_cache_file"
# clean up after ourselves no matter how we die.
trap '
ret=$?;
[[ $keep ]] && echo "Not removing $DRACUT_TMPDIR." >&2 || { [[ $DRACUT_TMPDIR ]] && rm -rf -- "$DRACUT_TMPDIR"; };
if [[ ${FSFROZEN} ]]; then
fsfreeze -u "${FSFROZEN}"
fi
exit $ret;
' EXIT
# clean up after ourselves no matter how we die.
trap 'exit 1;' SIGINT
readonly initdir="${DRACUT_TMPDIR}/initramfs"
mkdir -p "$initdir"
# shellcheck disable=SC2154
if [[ $early_microcode == yes ]] || { [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; }; then
readonly early_cpio_dir="${DRACUT_TMPDIR}/earlycpio"
mkdir "$early_cpio_dir"
fi
[[ "$dracutsysrootdir" ]] || [[ "$noexec" ]] || export DRACUT_RESOLVE_LAZY="1"
if [[ $print_cmdline ]]; then
stdloglvl=0
sysloglvl=0
fileloglvl=0
kmsgloglvl=0
fi
if [[ -f $dracutbasedir/dracut-version.sh ]]; then
# shellcheck source=./dracut-version.sh
. "$dracutbasedir"/dracut-version.sh
fi
if systemd-detect-virt -c &> /dev/null; then
export DRACUT_NO_MKNOD=1 DRACUT_NO_XATTR=1
if [[ $hostonly ]]; then
printf "%s\n" "dracut: WARNING: running in hostonly mode in a container!!"
fi
fi
if [[ -f $dracutbasedir/dracut-init.sh ]]; then
# shellcheck source=./dracut-init.sh
. "$dracutbasedir"/dracut-init.sh
else
printf "%s\n" "dracut: Cannot find $dracutbasedir/dracut-init.sh." >&2
printf "%s\n" "dracut: Are you running from a git checkout?" >&2
printf "%s\n" "dracut: Try passing -l as an argument to $dracut_cmd" >&2
exit 1
fi
if [[ $enhanced_cpio == "yes" ]]; then
enhanced_cpio="$dracutbasedir/dracut-cpio"
if [[ -x $enhanced_cpio ]]; then
# align based on statfs optimal transfer size
cpio_align=$(stat --file-system -c "%s" -- "$initdir")
else
dinfo "--enhanced-cpio ignored due to lack of dracut-cpio"
unset enhanced_cpio
fi
else
unset enhanced_cpio
fi
# shellcheck disable=SC2154
if [[ $no_kernel != yes ]] && ! [[ -d $srcmods ]]; then
printf "%s\n" "dracut: Cannot find module directory $srcmods" >&2
printf "%s\n" "dracut: and --no-kernel was not specified" >&2
exit 1
fi
if ! [[ $print_cmdline ]]; then
inst "$DRACUT_TESTBIN"
if ! $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R "$DRACUT_TESTBIN" &> /dev/null; then
unset DRACUT_RESOLVE_LAZY
export DRACUT_RESOLVE_DEPS=1
fi
rm -fr -- "${initdir:?}"/*
fi
dracutfunctions=$dracutbasedir/dracut-functions.sh
export dracutfunctions
((${#drivers_l[@]})) && drivers="${drivers_l[*]}"
drivers=${drivers/-/_}
((${#add_drivers_l[@]})) && add_drivers+=" ${add_drivers_l[*]} "
add_drivers=${add_drivers/-/_}
((${#force_drivers_l[@]})) && force_drivers+=" ${force_drivers_l[*]} "
force_drivers=${force_drivers/-/_}
((${#omit_drivers_l[@]})) && omit_drivers+=" ${omit_drivers_l[*]} "
omit_drivers=${omit_drivers/-/_}
((${#kernel_cmdline_l[@]})) && kernel_cmdline+=" ${kernel_cmdline_l[*]} "
omit_drivers_corrected=""
for d in $omit_drivers; do
[[ " $drivers $add_drivers " == *\ $d\ * ]] && continue
[[ " $drivers $force_drivers " == *\ $d\ * ]] && continue
omit_drivers_corrected+="$d|"
done
omit_drivers="${omit_drivers_corrected%|}"
unset omit_drivers_corrected
# prepare args for logging
for ((i = 0; i < ${#dracut_args[@]}; i++)); do
[[ ${dracut_args[$i]} == *\ * ]] \
&& dracut_args[$i]="\"${dracut_args[$i]}\""
#" keep vim happy
done
dinfo "Executing: $dracut_cmd ${dracut_args[*]}"
[[ $do_list == yes ]] && {
for mod in "$dracutbasedir"/modules.d/*; do
[[ -d $mod ]] || continue
[[ -e $mod/install || -e $mod/installkernel || -e $mod/module-setup.sh ]] || continue
printf "%s\n" "${mod##*/??}"
done
exit 0
}
# This is kinda legacy -- eventually it should go away.
case $dracutmodules in
"" | auto) dracutmodules="all" ;;
esac
abs_outfile=$(readlink -f "$outfile") && outfile="$abs_outfile"
[[ -d $dracutsysrootdir$systemdutildir ]] \
|| systemdutildir=$(pkg-config systemd --variable=systemdutildir 2> /dev/null)
if ! [[ -d $dracutsysrootdir$systemdutildir ]]; then
[[ -e $dracutsysrootdir/lib/systemd/systemd-udevd ]] && systemdutildir=/lib/systemd
[[ -e $dracutsysrootdir/usr/lib/systemd/systemd-udevd ]] && systemdutildir=/usr/lib/systemd
fi
[[ -d $dracutsysrootdir$systemdutilconfdir ]] \
|| systemdutilconfdir=$(pkg-config systemd --variable=systemdutilconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$systemdutilconfdir ]] || systemdutilconfdir=/etc/systemd
if [[ $no_kernel != yes ]] && [[ -d $srcmods ]]; then
if ! [[ -f $srcmods/modules.dep ]]; then
if [[ -n "$(find "$srcmods" -name '*.ko*')" ]]; then
dfatal "$srcmods/modules.dep is missing. Did you run depmod?"
exit 1
else
dwarn "$srcmods/modules.dep is missing. Did you run depmod?"
fi
fi
fi
if [[ ! $print_cmdline ]]; then
if [[ -f $outfile && ! $force ]]; then
dfatal "Will not override existing initramfs ($outfile) without --force"
exit 1
fi
outdir=${outfile%/*}
[[ $outdir ]] || outdir="/"
if [[ ! -d $outdir ]]; then
dfatal "Can't write to $outdir: Directory $outdir does not exist or is not accessible."
exit 1
elif [[ ! -w $outdir ]]; then
dfatal "No permission to write to $outdir."
exit 1
elif [[ -f $outfile && ! -w $outfile ]]; then
dfatal "No permission to write $outfile."
exit 1
fi
if [[ $loginstall ]]; then
if ! mkdir -p "$loginstall"; then
dfatal "Could not create directory to log installed files to '$loginstall'."
exit 1
fi
loginstall=$(readlink -f "$loginstall")
fi
if [[ $uefi == yes ]]; then
if ! command -v objcopy &> /dev/null; then
dfatal "Need 'objcopy' to create a UEFI executable"
exit 1
fi
unset EFI_MACHINE_TYPE_NAME
case $(uname -m) in
x86_64)
EFI_MACHINE_TYPE_NAME=x64
;;
i?86)
EFI_MACHINE_TYPE_NAME=ia32
;;
aarch64)
EFI_MACHINE_TYPE_NAME=aa64
;;
*)
dfatal "Architecture '$(uname -m)' not supported to create a UEFI executable"
exit 1
;;
esac
if ! [[ -s $uefi_stub ]]; then
uefi_stub="$dracutsysrootdir${systemdutildir}/boot/efi/linux${EFI_MACHINE_TYPE_NAME}.efi.stub"
fi
if ! [[ -s $uefi_stub ]]; then
dfatal "Can't find a uefi stub '$uefi_stub' to create a UEFI executable"
exit 1
fi
if ! [[ $kernel_image ]]; then
for kernel_image in "$dracutsysrootdir/lib/modules/$kernel/vmlinuz" "$dracutsysrootdir/boot/vmlinuz-$kernel"; do
[[ -s $kernel_image ]] || continue
break
done
fi
if ! [[ -s $kernel_image ]]; then
dfatal "Can't find a kernel image '$kernel_image' to create a UEFI executable"
exit 1
fi
fi
fi
if [[ $acpi_override == yes ]] && ! (check_kernel_config CONFIG_ACPI_TABLE_UPGRADE || check_kernel_config CONFIG_ACPI_INITRD_TABLE_OVERRIDE); then
dwarn "Disabling ACPI override, because kernel does not support it. CONFIG_ACPI_INITRD_TABLE_OVERRIDE!=y or CONFIG_ACPI_TABLE_UPGRADE!=y"
unset acpi_override
fi
if [[ $early_microcode == yes ]]; then
if [[ $hostonly ]]; then
if [[ $(get_cpu_vendor) == "AMD" || $(get_cpu_vendor) == "Intel" ]]; then
check_kernel_config CONFIG_MICROCODE || unset early_microcode
else
unset early_microcode
fi
else
! check_kernel_config CONFIG_MICROCODE \
&& unset early_microcode
fi
# Do not complain on non-x86 architectures as it makes no sense
case $(uname -m) in
x86_64 | i?86)
[[ $early_microcode != yes ]] \
&& dwarn "Disabling early microcode, because kernel does not support it. CONFIG_MICROCODE!=y"
;;
*) ;;
esac
fi
# Need to be able to have non-root users read stuff (rpcbind etc)
chmod 755 "$initdir"
if [[ $hostonly ]]; then
for i in /sys /proc /run /dev; do
if ! findmnt --target "$i" &> /dev/null; then
dwarning "Turning off host-only mode: '$i' is not mounted!"
unset hostonly
fi
done
fi
declare -A host_fs_types
for line in "${fstab_lines[@]}"; do
# shellcheck disable=SC2086
set -- $line
dev="$1"
#dev mp fs fsopts
case "$dev" in
UUID=*)
dev=$(blkid -l -t "UUID=${dev#UUID=}" -o device)
;;
LABEL=*)
dev=$(blkid -l -t "LABEL=${dev#LABEL=}" -o device)
;;
PARTUUID=*)
dev=$(blkid -l -t "PARTUUID=${dev#PARTUUID=}" -o device)
;;
PARTLABEL=*)
dev=$(blkid -l -t "PARTLABEL=${dev#PARTLABEL=}" -o device)
;;
esac
[ -z "$dev" ] && dwarn "Bad fstab entry $*" && continue
if [[ $3 == btrfs ]]; then
for mp in $(findmnt --source "$1" -o TARGET -n); do
for i in $(btrfs_devs "$mp"); do
push_host_devs "$i"
done
done
elif [[ $3 == zfs ]]; then
for mp in $(zfs_devs "$1"); do
push_host_devs "$mp"
done
fi
push_host_devs "$dev"
host_fs_types["$dev"]="$3"
done
for f in $add_fstab; do
[[ -e $f ]] || continue
while read -r dev rest || [ -n "$dev" ]; do
push_host_devs "$dev"
done < "$f"
done
for dev in $add_device; do
push_host_devs "$dev"
done
if ((${#add_device_l[@]})); then
add_device+=" ${add_device_l[*]} "
push_host_devs "${add_device_l[@]}"
fi
if [[ $hostonly ]] && [[ $hostonly_default_device != "no" ]]; then
# in hostonly mode, determine all devices, which have to be accessed
# and examine them for filesystem types
for mp in \
"/" \
"/etc" \
"/bin" \
"/sbin" \
"/lib" \
"/lib64" \
"/usr" \
"/usr/bin" \
"/usr/sbin" \
"/usr/lib" \
"/usr/lib64" \
"/boot" \
"/boot/efi" \
"/boot/zipl"; do
mp=$(readlink -f "$dracutsysrootdir$mp")
mountpoint "$mp" > /dev/null 2>&1 || continue
_dev=$(find_block_device "$mp")
_bdev=$(readlink -f "/dev/block/$_dev")
[[ -b $_bdev ]] && _dev=$_bdev
[[ $mp == "/" ]] && root_devs+=("$_dev")
push_host_devs "$_dev"
if [[ $(find_mp_fstype "$mp") == btrfs ]]; then
for i in $(btrfs_devs "$mp"); do
[[ $mp == "/" ]] && root_devs+=("$i")
push_host_devs "$i"
done
elif [[ $(find_mp_fstype "$mp") == zfs ]]; then
for i in $(zfs_devs "$(findmnt -n -o SOURCE "$mp")"); do
[[ $mp == "/" ]] && root_devs+=("$i")
push_host_devs "$i"
done
fi
done
# TODO - with sysroot, /proc/swaps is not relevant
if [[ -f /proc/swaps ]] && [[ -f $dracutsysrootdir/etc/fstab ]]; then
while read -r dev type rest || [ -n "$dev" ]; do
[[ -b $dev ]] || continue
[[ $type == "partition" ]] || continue
while read -r _d _m _t _o _ || [ -n "$_d" ]; do
[[ $_d == \#* ]] && continue
[[ $_d ]] || continue
[[ $_t != "swap" ]] && continue
[[ $_m != "swap" ]] && [[ $_m != "none" ]] && continue
[[ $_o == *noauto* ]] && continue
_d=$(expand_persistent_dev "$_d")
[[ $_d -ef $dev ]] || continue
if [[ -f $dracutsysrootdir/etc/crypttab ]]; then
while read -r _mapper _ _p _o || [ -n "$_mapper" ]; do
[[ $_mapper == \#* ]] && continue
[[ $_d -ef /dev/mapper/"$_mapper" ]] || continue
[[ "$_o" ]] || _o="$_p"
# skip entries with password files
[[ $_p == /* ]] && [[ -f $_p ]] && continue 2
# skip mkswap swap
[[ $_o == *swap* ]] && continue 2
done < "$dracutsysrootdir"/etc/crypttab
fi
_dev="$(readlink -f "$dev")"
push_host_devs "$_dev"
swap_devs+=("$_dev")
break
done < "$dracutsysrootdir"/etc/fstab
done < /proc/swaps
fi
# collect all "x-initrd.mount" entries from /etc/fstab
if [[ -f $dracutsysrootdir/etc/fstab ]]; then
while read -r _d _m _t _o _ || [ -n "$_d" ]; do
[[ $_d == \#* ]] && continue
[[ $_d ]] || continue
[[ $_o != *x-initrd.mount* ]] && continue
_dev=$(expand_persistent_dev "$_d")
_dev="$(readlink -f "$_dev")"
[[ -b $_dev ]] || continue
push_host_devs "$_dev"
if [[ $_t == btrfs ]]; then
for i in $(btrfs_devs "$_m"); do
push_host_devs "$i"
done
elif [[ $_t == zfs ]]; then
for i in $(zfs_devs "$_d"); do
push_host_devs "$i"
done
fi
done < "$dracutsysrootdir"/etc/fstab
fi
fi
unset m
unset rest
_get_fs_type() {
[[ $1 ]] || return
if [[ -b /dev/block/$1 ]]; then
ID_FS_TYPE=$(get_fs_env "/dev/block/$1") && host_fs_types["$(readlink -f "/dev/block/$1")"]="$ID_FS_TYPE"
return 1
fi
if [[ -b $1 ]]; then
ID_FS_TYPE=$(get_fs_env "$1") && host_fs_types["$(readlink -f "$1")"]="$ID_FS_TYPE"
return 1
fi
if fstype=$(find_dev_fstype "$1"); then
host_fs_types["$1"]="$fstype"
return 1
fi
return 1
}
for dev in "${host_devs[@]}"; do
_get_fs_type "$dev"
check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
done
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} == "reiserfs" ]] || [[ ${host_fs_types[$dev]} == "xfs" ]] || continue
rootopts=$(find_dev_fsopts "$dev")
if [[ ${host_fs_types[$dev]} == "reiserfs" ]]; then
journaldev=$(fs_get_option "$rootopts" "jdev")
elif [[ ${host_fs_types[$dev]} == "xfs" ]]; then
journaldev=$(fs_get_option "$rootopts" "logdev")
fi
if [[ $journaldev ]]; then
dev="$(readlink -f "$dev")"
push_host_devs "$dev"
_get_fs_type "$dev"
check_block_and_slaves_all _get_fs_type "$(get_maj_min "$dev")"
fi
done
[[ -d $dracutsysrootdir$dbus ]] \
|| dbus=$(pkg-config dbus --variable=dbus 2> /dev/null)
[[ -d $dracutsysrootdir$dbus ]] || dbus=/usr/share/dbus-1
[[ -d $dracutsysrootdir$dbusconfdir ]] \
|| dbusconfdir=$(pkg-config dbus --variable=dbusconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbusconfdir ]] || dbusconfdir=/etc/dbus-1
[[ -d $dracutsysrootdir$dbusinterfaces ]] \
|| dbusinterfaces=$(pkg-config dbus --variable=dbusinterfaces 2> /dev/null)
[[ -d $dracutsysrootdir$dbusinterfaces ]] || dbusinterfaces=${dbus}/interfaces
[[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] \
|| dbusinterfacesconfdir=$(pkg-config dbus --variable=dbusinterfacesconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbusinterfacesconfdir ]] || dbusinterfacesconfdir=${dbusconfdir}/interfaces
[[ -d $dracutsysrootdir$dbusservices ]] \
|| dbusservices=$(pkg-config dbus --variable=dbusservices 2> /dev/null)
[[ -d $dracutsysrootdir$dbusservices ]] || dbusservices=${dbus}/services
[[ -d $dracutsysrootdir$dbusservicesconfdir ]] \
|| dbusservicesconfdir=$(pkg-config dbus --variable=dbusservicesconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbusservicesconfdir ]] || dbusservicesconfdir=${dbusconfdir}/services
[[ -d $dracutsysrootdir$dbussession ]] \
|| dbussession=$(pkg-config dbus --variable=dbussession 2> /dev/null)
[[ -d $dracutsysrootdir$dbussession ]] || dbussession=${dbus}/session.d
[[ -d $dracutsysrootdir$dbussessionconfdir ]] \
|| dbussessionconfdir=$(pkg-config dbus --variable=dbussessionconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbussessionconfdir ]] || dbussessionconfdir=${dbusconfdir}/session.d
[[ -d $dracutsysrootdir$dbussystem ]] \
|| dbussystem=$(pkg-config dbus --variable=dbussystem 2> /dev/null)
[[ -d $dracutsysrootdir$dbussystem ]] || dbussystem=${dbus}/system.d
[[ -d $dracutsysrootdir$dbussystemconfdir ]] \
|| dbussystemconfdir=$(pkg-config dbus --variable=dbussystemconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbussystemconfdir ]] || dbussystemconfdir=${dbusconfdir}/system.d
[[ -d $dracutsysrootdir$dbussystemservices ]] \
|| dbussystemservices=$(pkg-config dbus --variable=dbussystemservices 2> /dev/null)
[[ -d $dracutsysrootdir$dbussystemservices ]] || dbussystemservices=${dbus}/system-services
[[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] \
|| dbussystemservicesconfdir=$(pkg-config dbus --variable=dbussystemservicesconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$dbussystemservicesconfdir ]] || dbussystemservicesconfdir=${dbusconfdir}/system-services
[[ -d $dracutsysrootdir$udevdir ]] \
|| udevdir="$(pkg-config udev --variable=udevdir 2> /dev/null)"
if ! [[ -d $dracutsysrootdir$udevdir ]]; then
[[ -e $dracutsysrootdir/lib/udev/ata_id ]] && udevdir=/lib/udev
[[ -e $dracutsysrootdir/usr/lib/udev/ata_id ]] && udevdir=/usr/lib/udev
fi
[[ -d $dracutsysrootdir$udevconfdir ]] \
|| udevconfdir=$(pkg-config udev --variable=udevconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$udevconfdir ]] || udevconfdir=/etc/udev
[[ -d $dracutsysrootdir$udevrulesdir ]] \
|| udevrulesdir=$(pkg-config udev --variable=udevrulesdir 2> /dev/null)
[[ -d $dracutsysrootdir$udevrulesdir ]] || udevrulesdir=${udevdir}/rules.d
[[ -d $dracutsysrootdir$udevrulesconfdir ]] \
|| udevrulesconfdir=$(pkg-config udev --variable=udevrulesconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$udevrulesconfdir ]] || udevrulesconfdir=${udevconfdir}/rules.d
[[ -d $dracutsysrootdir$sysctld ]] \
|| sysctld=$(pkg-config systemd --variable=sysctld 2> /dev/null)
[[ -d $dracutsysrootdir$sysctld ]] || sysctld=/usr/lib/sysctl.d
[[ -d $dracutsysrootdir$sysctlconfdir ]] \
|| sysctlconfdir=$(pkg-config systemd --variable=sysctlconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$sysctlconfdir ]] || sysctlconfdir=/etc/sysctl.d
[[ -d $dracutsysrootdir$environment ]] \
|| environment=$(pkg-config systemd --variable=environment 2> /dev/null)
[[ -d $dracutsysrootdir$environment ]] || environment=/usr/lib/environment.d
[[ -d $dracutsysrootdir$environmentconfdir ]] \
|| environmentconfdir=$(pkg-config systemd --variable=environmentconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$environmentconfdir ]] || environmentconfdir=/etc/environment.d
[[ -d $dracutsysrootdir$systemdcatalog ]] \
|| systemdcatalog=$(pkg-config systemd --variable=systemdcatalog 2> /dev/null)
[[ -d $dracutsysrootdir$systemdcatalog ]] || systemdcatalog=${systemdutildir}/catalog
[[ -d $dracutsysrootdir$modulesload ]] \
|| modulesload=$(pkg-config systemd --variable=modulesload 2> /dev/null)
[[ -d $dracutsysrootdir$modulesload ]] || modulesload=/usr/lib/modules-load.d
[[ -d $dracutsysrootdir$modulesloadconfdir ]] \
|| modulesloadconfdir=$(pkg-config systemd --variable=modulesloadconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$modulesloadconfdir ]] || modulesloadconfdir=/etc/modules-load.d
[[ -d $dracutsysrootdir$systemdnetwork ]] \
|| systemdnetwork=$(pkg-config systemd --variable=systemdnetwork 2> /dev/null)
[[ -d $dracutsysrootdir$systemdnetwork ]] || systemdnetwork=${systemdutildir}/network
[[ -d $dracutsysrootdir$systemdnetworkconfdir ]] \
|| systemdnetworkconfdir=$(pkg-config systemd --variable=systemdnetworkconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$systemdnetworkconfdir ]] || systemdnetworkconfdir=${systemdutilconfdir}/network
[[ -d $dracutsysrootdir$systemdntpunits ]] \
|| systemdntpunits=$(pkg-config systemd --variable=systemdntpunits 2> /dev/null)
[[ -d $dracutsysrootdir$systemdntpunits ]] || systemdntpunits=${systemdutildir}/ntp-units.d
[[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] \
|| systemdntpunitsconfdir=$(pkg-config systemd --variable=systemdntpunitsconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$systemdntpunitsconfdir ]] || systemdntpunitsconfdir=${systemdutilconfdir}/ntp-units.d
[[ -d $dracutsysrootdir$systemdportable ]] \
|| systemdportable=$(pkg-config systemd --variable=systemdportable 2> /dev/null)
[[ -d $dracutsysrootdir$systemdportable ]] || systemdportable=${systemdutildir}/portable
[[ -d $dracutsysrootdir$systemdportableconfdir ]] \
|| systemdportableconfdir=$(pkg-config systemd --variable=systemdportableconfdir 2> /dev/null)
[[ -d "$dracutsysrootdir$systemdportableconfdir" ]] || systemdportableconfdir=${systemdutilconfdir}/portable
[[ -d $dracutsysrootdir$systemdsystemunitdir ]] \
|| systemdsystemunitdir=$(pkg-config systemd --variable=systemdsystemunitdir 2> /dev/null)
[[ -d "$dracutsysrootdir$systemdsystemunitdir" ]] || systemdsystemunitdir=${systemdutildir}/system
[[ -d $dracutsysrootdir$systemduser ]] \
|| systemduser=$(pkg-config systemd --variable=systemduser 2> /dev/null)
[[ -d $dracutsysrootdir$systemduser ]] || systemduser=${systemdutildir}/user
[[ -d $dracutsysrootdir$systemduserconfdir ]] \
|| systemduserconfdir=$(pkg-config systemd --variable=systemduserconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$systemduserconfdir ]] || systemduserconfdir=${systemdutilconfdir}/user
[[ -d $dracutsysrootdir$systemdsystemconfdir ]] \
|| systemdsystemconfdir=$(pkg-config systemd --variable=systemdsystemconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$systemdsystemconfdir ]] || systemdsystemconfdir=/etc/systemd/system
[[ -d $dracutsysrootdir$sysusers ]] \
|| sysusers=$(pkg-config systemd --variable=sysusers 2> /dev/null)
[[ -d $dracutsysrootdir$sysusers ]] || sysusers=/usr/lib/sysusers.d
[[ -d $dracutsysrootdir$sysusersconfdir ]] \
|| sysusersconfdir=$(pkg-config systemd --variable=sysusersconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$sysusersconfdir ]] || sysusersconfdir=/etc/sysusers.d
[[ -d $dracutsysrootdir$tmpfilesdir ]] \
|| tmpfilesdir=$(pkg-config systemd --variable=tmpfilesdir 2> /dev/null)
if ! [[ -d $dracutsysrootdir$tmpfilesdir ]]; then
[[ -d $dracutsysrootdir/lib/tmpfiles.d ]] && tmpfilesdir=/lib/tmpfiles.d
[[ -d $dracutsysrootdir/usr/lib/tmpfiles.d ]] && tmpfilesdir=/usr/lib/tmpfiles.d
fi
[[ -d $dracutsysrootdir$tmpfilesconfdir ]] \
|| tmpfilesconfdir=$(pkg-config systemd --variable=tmpfilesconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$tmpfilesconfdir ]] || tmpfilesconfdir=/etc/tmpfiles.d
[[ -d $dracutsysrootdir$depmodd ]] \
|| depmodd=$(pkg-config libkmod --variable=depmodd 2> /dev/null)
[[ -d $dracutsysrootdir$depmodd ]] || depmodd=/usr/lib/depmod.d
[[ -d $dracutsysrootdir$depmodconfdir ]] \
|| depmodconfdir=$(pkg-config libkmod --variable=depmodconfdir 2> /dev/null)
[[ -d $dracutsysrootdir$depmodconfdir ]] || depmodconfdir=/etc/depmod.d
export initdir dracutbasedir \
dracutmodules force_add_dracutmodules add_dracutmodules omit_dracutmodules \
mods_to_load \
fw_dir drivers_dir debug no_kernel kernel_only \
omit_drivers mdadmconf lvmconf root_devs \
use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
debug host_fs_types host_devs swap_devs sshkey add_fstab \
DRACUT_VERSION udevdir udevconfdir udevrulesdir udevrulesconfdir \
prefix filesystems drivers dbus dbusconfdir dbusinterfaces \
dbusinterfacesconfdir dbusservices dbusservicesconfdir dbussession \
dbussessionconfdir dbussystem dbussystemconfdir dbussystemservices \
dbussystemservicesconfdir environment environmentconfdir modulesload \
modulesloadconfdir sysctld sysctlconfdir sysusers sysusersconfdir \
systemdutildir systemdutilconfdir systemdcatalog systemdnetwork \
systemdnetworkconfdir systemdntpunits systemdntpunitsconfdir \
systemdportable systemdportableconfdir systemdsystemunitdir \
systemdsystemconfdir systemduser systemduserconfdir \
hostonly_cmdline loginstall tmpfilesdir tmpfilesconfdir depmodd \
depmodconfdir
mods_to_load=""
# check all our modules to see if they should be sourced.
# This builds a list of modules that we will install next.
for_each_module_dir check_module
for_each_module_dir check_mount
dracut_module_included "fips" && export DRACUT_FIPS_MODE=1
do_print_cmdline() {
local -A _mods_to_print
for i in $modules_loaded $mods_to_load; do
_mods_to_print[$i]=1
done
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
_d_mod=${moddir##*/}
_d_mod=${_d_mod#[0-9][0-9]}
[[ ${_mods_to_print[$_d_mod]} ]] || continue
module_cmdline "$_d_mod" "$moddir"
done
unset moddir
}
if [[ $print_cmdline ]]; then
do_print_cmdline
printf "\n"
exit 0
fi
# Create some directory structure first
# shellcheck disable=SC2174
[[ $prefix ]] && mkdir -m 0755 -p "${initdir}${prefix}"
# shellcheck disable=SC2174
[[ -L $dracutsysrootdir/lib ]] || mkdir -m 0755 -p "${initdir}${prefix}/lib"
[[ $prefix ]] && ln -sfn "${prefix#/}/lib" "$initdir/lib"
if [[ $prefix ]]; then
for d in bin etc lib sbin tmp usr var $libdirs; do
d=${d#/}
[[ $d == */* ]] && continue
ln -sfn "${prefix#/}/${d#/}" "$initdir/$d"
done
fi
if [[ $kernel_only != yes ]]; then
for d in usr usr/bin usr/sbin bin etc lib sbin tmp var var/tmp $libdirs; do
d=${d#/}
[[ -e "${initdir}${prefix}/$d" ]] && continue
if [ -L "/$d" ]; then
inst_symlink "/$d" "${prefix}/$d"
else
# shellcheck disable=SC2174
mkdir -m 0755 -p "${initdir}${prefix}/$d"
fi
done
for d in dev proc sys sysroot root run; do
if [ -L "/$d" ]; then
inst_symlink "/$d"
else
# shellcheck disable=SC2174
mkdir -m 0755 -p "$initdir/$d"
fi
done
ln -sfn ../run "$initdir/var/run"
ln -sfn ../run/lock "$initdir/var/lock"
else
for d in lib "$libdirs"; do
[[ -e "${initdir}${prefix}/$d" ]] && continue
if [ -h "/$d" ]; then
inst "/$d" "${prefix}/$d"
else
# shellcheck disable=SC2174
mkdir -m 0755 -p "${initdir}${prefix}/$d"
fi
done
fi
if [[ $kernel_only != yes ]]; then
mkdir -p "${initdir}/etc/cmdline.d"
# shellcheck disable=SC2174
mkdir -m 0755 -p "${initdir}"/lib "${initdir}"/lib/dracut "${initdir}"/lib/dracut/hooks
# shellcheck disable=SC2154
for _d in $hookdirs; do
# shellcheck disable=SC2174
mkdir -m 0755 -p "${initdir}/lib/dracut/hooks/$_d"
done
if [[ $EUID == "0" ]] && ! [[ $DRACUT_NO_MKNOD ]]; then
[[ -c ${initdir}/dev/null ]] || mknod "${initdir}"/dev/null c 1 3
[[ -c ${initdir}/dev/kmsg ]] || mknod "${initdir}"/dev/kmsg c 1 11
[[ -c ${initdir}/dev/console ]] || mknod "${initdir}"/dev/console c 5 1
[[ -c ${initdir}/dev/random ]] || mknod "${initdir}"/dev/random c 1 8
[[ -c ${initdir}/dev/urandom ]] || mknod "${initdir}"/dev/urandom c 1 9
fi
fi
_isize=0 #initramfs size
modules_loaded=" "
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
_d_mod=${moddir##*/}
_d_mod=${_d_mod#[0-9][0-9]}
[[ $mods_to_load == *\ $_d_mod\ * ]] || continue
if [[ $show_modules == yes ]]; then
printf "%s\n" "$_d_mod"
else
dinfo "*** Including module: $_d_mod ***"
fi
if [[ $kernel_only == yes ]]; then
module_installkernel "$_d_mod" "$moddir" || {
dfatal "installkernel failed in module $_d_mod"
exit 1
}
else
module_install "$_d_mod" "$moddir"
if [[ $no_kernel != yes ]]; then
module_installkernel "$_d_mod" "$moddir" || {
dfatal "installkernel failed in module $_d_mod"
exit 1
}
fi
fi
mods_to_load=${mods_to_load// $_d_mod /}
modules_loaded+="$_d_mod "
#print the module install size
if [ -n "$printsize" ]; then
_isize_new=$(du -sk "${initdir}" | {
read -r a _
echo -n "$a"
})
_isize_delta=$((_isize_new - _isize))
printf "%s\n" "$_d_mod install size: ${_isize_delta}k"
_isize=$_isize_new
fi
done
unset moddir
for i in $modules_loaded; do
mkdir -p "$initdir"/lib/dracut
printf "%s\n" "$i" >> "$initdir"/lib/dracut/modules.txt
done
dinfo "*** Including modules done ***"
## final stuff that has to happen
if [[ $no_kernel != yes ]]; then
if [[ $hostonly_mode == "strict" ]]; then
cp "$DRACUT_KERNEL_MODALIASES" "$initdir"/lib/dracut/hostonly-kernel-modules.txt
fi
if [[ $drivers ]]; then
# shellcheck disable=SC2086
hostonly='' instmods $drivers
fi
if [[ -n ${add_drivers// /} ]]; then
# shellcheck disable=SC2086
hostonly='' instmods -c $add_drivers
fi
if [[ $force_drivers ]]; then
# shellcheck disable=SC2086
hostonly='' instmods -c $force_drivers
rm -f "$initdir"/etc/cmdline.d/20-force_driver.conf
for mod in $force_drivers; do
echo "rd.driver.pre=$mod" >> "$initdir"/etc/cmdline.d/20-force_drivers.conf
done
fi
if [[ $filesystems ]]; then
# shellcheck disable=SC2086
hostonly='' instmods -c $filesystems
fi
dinfo "*** Installing kernel module dependencies ***"
dracut_kernel_post
dinfo "*** Installing kernel module dependencies done ***"
if [[ $noimageifnotneeded == yes ]] && [[ $hostonly ]]; then
if [[ ! -f "$initdir/lib/dracut/need-initqueue" ]] \
&& [[ -f ${initdir}/lib/modules/$kernel/modules.dep && ! -s ${initdir}/lib/modules/$kernel/modules.dep ]]; then
for i in "${initdir}"/etc/cmdline.d/*.conf; do
# We need no initramfs image and do not generate one.
[[ $i == "${initdir}/etc/cmdline.d/*.conf" ]] && exit 0
done
fi
fi
fi
if [[ $kernel_only != yes ]]; then
# FIXME: handle legacy item split
# shellcheck disable=SC2068
((${#install_items[@]} > 0)) && inst_multiple ${install_items[@]}
# shellcheck disable=SC2068
((${#install_optional_items[@]} > 0)) && inst_multiple -o ${install_optional_items[@]}
if [[ $kernel_cmdline ]] && [[ $uefi != yes ]]; then
printf "%s\n" "$kernel_cmdline" >> "${initdir}/etc/cmdline.d/01-default.conf"
fi
for line in "${fstab_lines[@]}"; do
read -r -a fstab_field <<< "$line"
if [ -z "${fstab_field[1]}" ]; then
# Determine device and mount options from current system
mountpoint -q "${fstab_field[0]}" || derror "${fstab_field[0]} is not a mount point!"
read -r -a fstab_field < <(findmnt --raw -n --target "${fstab_field[0]}" --output=source,target,fstype,options)
dinfo "Line for ${fstab_field[1]}: ${fstab_field[*]}"
else
# Use default options
[ -z "${fstab_field[3]}" ] && fstab_field[3]="defaults"
fi
# Default options for freq and passno
[ -z "${fstab_field[4]}" ] && fstab_field[4]="0"
[ -z "${fstab_field[5]}" ] && fstab_field[5]="2"
strstr "${fstab_field[2]}" "nfs" && fstab_field[5]="0"
echo "${fstab_field[@]}" >> "${initdir}/etc/fstab"
done
for f in $add_fstab; do
cat "$f" >> "${initdir}/etc/fstab"
done
if [[ $dracutsysrootdir$systemdutildir ]]; then
if [[ -d ${initdir}/$systemdutildir ]]; then
mkdir -p "${initdir}"/etc/conf.d
{
printf "%s\n" "systemdutildir=\"$systemdutildir\""
printf "%s\n" "systemdsystemunitdir=\"$systemdsystemunitdir\""
printf "%s\n" "systemdsystemconfdir=\"$systemdsystemconfdir\""
} > "${initdir}"/etc/conf.d/systemd.conf
fi
fi
if [[ $DRACUT_RESOLVE_LAZY ]] && [[ $DRACUT_INSTALL ]]; then
dinfo "*** Resolving executable dependencies ***"
find "$initdir" -type f -perm /0111 -not -path '*.ko' -print0 \
| xargs -r -0 "$DRACUT_INSTALL" ${initdir:+-D "$initdir"} ${dracutsysrootdir:+-r "$dracutsysrootdir"} -R ${DRACUT_FIPS_MODE:+-f} --
dinfo "*** Resolving executable dependencies done ***"
fi
# Now we are done with lazy resolving, always install dependencies
unset DRACUT_RESOLVE_LAZY
export DRACUT_RESOLVE_DEPS=1
fi
for ((i = 0; i < ${#include_src[@]}; i++)); do
src="${include_src[$i]}"
target="${include_target[$i]}"
if [[ $src && $target ]]; then
if [[ -f $src ]]; then
inst "$src" "$target"
elif [[ -d $src ]]; then
ddebug "Including directory: $src"
destdir="${initdir}/${target}"
mkdir -p "$destdir"
# check for preexisting symlinks, so we can cope with the
# symlinks to $prefix
# Objectname is a file or a directory
reset_dotglob="$(shopt -p dotglob)"
shopt -q -s dotglob
for objectname in "$src"/*; do
[[ -e $objectname || -L $objectname ]] || continue
if [[ -d $objectname ]] && [[ ! -L $objectname ]]; then
# objectname is a directory, let's compute the final directory name
object_destdir=${destdir}/${objectname#$src/}
if ! [[ -e $object_destdir ]]; then
# shellcheck disable=SC2174
mkdir -m 0755 -p "$object_destdir"
chmod --reference="$objectname" "$object_destdir"
fi
$DRACUT_CP -t "$object_destdir" "$dracutsysrootdir$objectname"/.
else
$DRACUT_CP -t "$destdir" "$dracutsysrootdir$objectname"
fi
done
eval "$reset_dotglob"
elif [[ -e $src ]]; then
derror "$src is neither a directory nor a regular file"
else
derror "$src doesn't exist"
fi
fi
done
if [[ $do_hardlink == yes ]] && command -v hardlink > /dev/null; then
dinfo "*** Hardlinking files ***"
hardlink "$initdir" 2>&1 | dinfo
dinfo "*** Hardlinking files done ***"
fi
# strip binaries
if [[ $do_strip == yes ]]; then
# Prefer strip from elfutils for package size
declare strip_cmd
strip_cmd=$(command -v eu-strip)
[ -z "$strip_cmd" ] && strip_cmd="strip"
for p in $strip_cmd xargs find; do
if ! type -P $p > /dev/null; then
dinfo "Could not find '$p'. Not stripping the initramfs."
do_strip=no
fi
done
if [[ $aggresive_strip == yes ]]; then
# `eu-strip` and `strip` both strips all unneeded parts by default
strip_args=(-p)
else
strip_args=(-g -p)
fi
fi
# cleanup empty ldconfig_paths directories
for d in $(ldconfig_paths); do
rmdir -p --ignore-fail-on-non-empty "$initdir/$d" > /dev/null 2>&1
done
if [[ $early_microcode == yes ]]; then
dinfo "*** Generating early-microcode cpio image ***"
ucode_dir=(amd-ucode intel-ucode)
ucode_dest=(AuthenticAMD.bin GenuineIntel.bin)
_dest_dir="$early_cpio_dir/d/kernel/x86/microcode"
_dest_idx="0 1"
mkdir -p "$_dest_dir"
if [[ $hostonly ]]; then
[[ $(get_cpu_vendor) == "AMD" ]] && _dest_idx="0"
[[ $(get_cpu_vendor) == "Intel" ]] && _dest_idx="1"
fi
for idx in $_dest_idx; do
_fw=${ucode_dir[$idx]}
for _fwdir in $fw_dir; do
if [[ -d $_fwdir && -d $_fwdir/$_fw ]]; then
_src="*"
dinfo "*** Constructing ${ucode_dest[$idx]} ***"
if [[ $hostonly ]]; then
_src=$(get_ucode_file)
[[ $_src ]] || break
[[ -r $_fwdir/$_fw/$_src ]] || _src="${_src}.early"
[[ -r $_fwdir/$_fw/$_src ]] || break
fi
for i in $_fwdir/$_fw/$_src; do
[ -e "$i" ] && break
break 2
done
for i in $_fwdir/$_fw/$_src; do
[[ -e $i ]] || continue
# skip gpg files
str_ends "$i" ".asc" && continue
cat "$i" >> "$_dest_dir/${ucode_dest[$idx]}"
done
create_early_cpio="yes"
fi
done
if [[ ! -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then
if cd "$early_cpio_dir/d"; then
for _ucodedir in "${early_microcode_image_dir[@]}"; do
for _ucodename in "${early_microcode_image_name[@]}"; do
[[ -e "$_ucodedir/$_ucodename" ]] \
&& cpio --extract --file "$_ucodedir/$_ucodename" --quiet \
"kernel/x86/microcode/${ucode_dest[$idx]}"
if [[ -e "$_dest_dir/${ucode_dest[$idx]}" ]]; then
dinfo "*** Using microcode found in '$_ucodedir/$_ucodename' ***"
create_early_cpio="yes"
break 2
fi
done
done
fi
fi
done
fi
if [[ $acpi_override == yes ]] && [[ -d $acpi_table_dir ]]; then
dinfo "*** Packaging ACPI tables to override BIOS provided ones ***"
_dest_dir="$early_cpio_dir/d/kernel/firmware/acpi"
mkdir -p "$_dest_dir"
for table in "$acpi_table_dir"/*.aml; do
dinfo " Adding ACPI table: $table"
$DRACUT_CP "$table" "$_dest_dir"
create_early_cpio="yes"
done
fi
dinfo "*** Store current command line parameters ***"
if ! (echo "$PARMS_TO_STORE" > "$initdir"/lib/dracut/build-parameter.txt); then
dfatal "Could not store the current command line parameters"
exit 1
fi
if [[ $hostonly_cmdline == "yes" ]]; then
unset _stored_cmdline
if [[ -d $initdir/etc/cmdline.d ]]; then
dinfo "Stored kernel commandline:"
for conf in "$initdir"/etc/cmdline.d/*.conf; do
[ -e "$conf" ] || continue
dinfo "$(< "$conf")"
_stored_cmdline=1
done
fi
if ! [[ $_stored_cmdline ]]; then
dinfo "No dracut internal kernel commandline stored in the initramfs"
fi
fi
if [[ $kernel_only != yes ]]; then
# libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so
for _dir in $libdirs; do
for _f in "$dracutsysrootdir$_dir/libpthread.so"*; do
[[ -e $_f ]] || continue
inst_libdir_file "libgcc_s.so*"
break 2
done
done
# FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled
if [[ $DRACUT_FIPS_MODE ]]; then
for _dir in $libdirs; do
for _f in "$dracutsysrootdir$_dir/libcrypto.so"*; do
[[ -e $_f ]] || continue
inst_libdir_file -o "libssl.so*"
break 2
done
done
fi
fi
if [[ $kernel_only != yes ]]; then
# make sure that library links are correct and up to date
build_ld_cache
fi
if dracut_module_included "squash"; then
readonly squash_dir="$initdir/squash/root"
readonly squash_img="$initdir/squash-root.img"
mkdir -p "$squash_dir"
dinfo "*** Install squash loader ***"
DRACUT_SQUASH_POST_INST=1 module_install "squash"
fi
if [[ $do_strip == yes ]] && ! [[ $DRACUT_FIPS_MODE ]]; then
# stripping files negates (dedup) benefits of using reflink
[[ -n $enhanced_cpio ]] && ddebug "strip is enabled alongside cpio reflink"
dinfo "*** Stripping files ***"
find "$initdir" -type f \
-executable -not -path '*/lib/modules/*.ko' -print0 \
| xargs -r -0 $strip_cmd "${strip_args[@]}" 2> /dev/null
# strip kernel modules, but do not touch signed modules
find "$initdir" -type f -path '*/lib/modules/*.ko' -print0 \
| while read -r -d $'\0' f || [ -n "$f" ]; do
SIG=$(tail -c 28 "$f" | tr -d '\000')
[[ $SIG == '~Module signature appended~' ]] || { printf "%s\000" "$f"; }
done | xargs -r -0 $strip_cmd "${strip_args[@]}"
dinfo "*** Stripping files done ***"
fi
if dracut_module_included "squash"; then
dinfo "*** Squashing the files inside the initramfs ***"
declare squash_compress_arg
# shellcheck disable=SC2086
if [[ $squash_compress ]]; then
if ! mksquashfs /dev/null "$DRACUT_TMPDIR"/.squash-test.img -no-progress -comp $squash_compress &> /dev/null; then
dwarn "mksquashfs doesn't support compressor '$squash_compress', failing back to default compressor."
else
squash_compress_arg="$squash_compress"
fi
fi
# shellcheck disable=SC2086
if ! mksquashfs "$squash_dir" "$squash_img" \
-no-xattrs -no-exports -noappend -no-recovery -always-use-fragments \
-no-progress ${squash_compress_arg:+-comp $squash_compress_arg} 1> /dev/null; then
dfatal "dracut: Failed making squash image"
exit 1
fi
rm -rf "$squash_dir"
dinfo "*** Squashing the files inside the initramfs done ***"
# Skip initramfs compress
compress="cat"
fi
dinfo "*** Creating image file '$outfile' ***"
if [[ $uefi == yes ]]; then
readonly uefi_outdir="$DRACUT_TMPDIR/uefi"
mkdir -p "$uefi_outdir"
fi
if [[ $DRACUT_REPRODUCIBLE ]]; then
find "$initdir" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
| xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
if [[ "$(cpio --help)" == *--reproducible* ]]; then
CPIO_REPRODUCIBLE=1
else
dinfo "cpio does not support '--reproducible'. Resulting image will not be reproducible."
fi
fi
[[ $EUID != 0 ]] && cpio_owner="0:0"
if [[ $create_early_cpio == yes ]]; then
echo 1 > "$early_cpio_dir/d/early_cpio"
if [[ $DRACUT_REPRODUCIBLE ]]; then
find "$early_cpio_dir/d" -newer "$dracutbasedir/dracut-functions.sh" -print0 \
| xargs -r -0 touch -h -m -c -r "$dracutbasedir/dracut-functions.sh"
fi
# The microcode blob is _before_ the initramfs blob, not after
if [[ -n $enhanced_cpio ]]; then
if ! (
umask 077
cd "$early_cpio_dir/d"
find . -print0 | sort -z \
| $enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \
--mtime 0 --data-align "$cpio_align" --truncate-existing \
"${DRACUT_TMPDIR}/initramfs.img"
); then
dfatal "dracut-cpio: creation of $outfile failed"
exit 1
fi
else
if ! (
umask 077
cd "$early_cpio_dir/d"
find . -print0 | sort -z \
| cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null \
${cpio_owner:+-R "$cpio_owner"} -H newc -o --quiet > "${DRACUT_TMPDIR}/initramfs.img"
); then
dfatal "dracut: creation of $outfile failed"
exit 1
fi
fi
fi
if check_kernel_config CONFIG_RD_ZSTD; then
DRACUT_KERNEL_RD_ZSTD=yes
else
DRACUT_KERNEL_RD_ZSTD=
fi
if [[ $compress == $DRACUT_COMPRESS_ZSTD* && ! $DRACUT_KERNEL_RD_ZSTD ]]; then
dwarn "dracut: kernel has no zstd support compiled in."
compress=
fi
if [[ $compress && $compress != cat ]]; then
if ! command -v "${compress%% *}" &> /dev/null; then
derror "dracut: cannot execute compression command '$compress', falling back to default"
compress=
fi
fi
if ! [[ $compress ]]; then
# check all known compressors, if none specified
for i in $DRACUT_COMPRESS_PIGZ $DRACUT_COMPRESS_GZIP $DRACUT_COMPRESS_LZ4 $DRACUT_COMPRESS_LZOP $DRACUT_COMPRESS_ZSTD $DRACUT_COMPRESS_LZMA $DRACUT_COMPRESS_XZ $DRACUT_COMPRESS_LBZIP2 $DRACUT_COMPRESS_BZIP2 $DRACUT_COMPRESS_CAT; do
[[ $i != "$DRACUT_COMPRESS_ZSTD" || $DRACUT_KERNEL_RD_ZSTD ]] || continue
command -v "$i" &> /dev/null || continue
compress="$i"
break
done
if [[ $compress == cat ]]; then
dwarn "dracut: no compression tool available. Initramfs image is going to be big."
else
dinfo "dracut: using auto-determined compression method '$compress'"
fi
fi
# choose the right arguments for the compressor
case $compress in
bzip2 | lbzip2)
if [[ $compress == lbzip2 ]] || command -v "$DRACUT_COMPRESS_LBZIP2" &> /dev/null; then
compress="$DRACUT_COMPRESS_LBZIP2 -9"
else
compress="$DRACUT_COMPRESS_BZIP2 -9"
fi
;;
lzma)
compress="$DRACUT_COMPRESS_LZMA -9 -T0"
;;
xz)
compress="$DRACUT_COMPRESS_XZ --check=crc32 --lzma2=dict=1MiB -T0"
;;
gzip | pigz)
if [[ $compress == pigz ]] || command -v "$DRACUT_COMPRESS_PIGZ" &> /dev/null; then
compress="$DRACUT_COMPRESS_PIGZ -9 -n -T -R"
elif command -v gzip &> /dev/null && $DRACUT_COMPRESS_GZIP --help 2>&1 | grep -q rsyncable; then
compress="$DRACUT_COMPRESS_GZIP -n -9 --rsyncable"
else
compress="$DRACUT_COMPRESS_GZIP -n -9"
fi
;;
lzo | lzop)
compress="$DRACUT_COMPRESS_LZOP -9"
;;
lz4)
compress="$DRACUT_COMPRESS_LZ4 -l -9"
;;
zstd)
compress="$DRACUT_COMPRESS_ZSTD -15 -q -T0"
;;
esac
if [[ -n $enhanced_cpio ]]; then
if [[ $compress == "cat" ]]; then
# dracut-cpio appends by default, so any ucode remains
cpio_outfile="${DRACUT_TMPDIR}/initramfs.img"
else
ddebug "$compress compression enabled alongside cpio reflink"
# dracut-cpio doesn't output to stdout, so stage for compression
cpio_outfile="${DRACUT_TMPDIR}/initramfs.img.uncompressed"
fi
if ! (
umask 077
cd "$initdir"
find . -print0 | sort -z \
| $enhanced_cpio --null ${cpio_owner:+--owner "$cpio_owner"} \
--mtime 0 --data-align "$cpio_align" "$cpio_outfile" || exit 1
[[ $compress == "cat" ]] && exit 0
$compress < "$cpio_outfile" >> "${DRACUT_TMPDIR}/initramfs.img" \
&& rm "$cpio_outfile"
); then
dfatal "dracut-cpio: creation of $outfile failed"
exit 1
fi
unset cpio_outfile
else
if ! (
umask 077
cd "$initdir"
find . -print0 | sort -z \
| cpio ${CPIO_REPRODUCIBLE:+--reproducible} --null ${cpio_owner:+-R "$cpio_owner"} -H newc -o --quiet \
| $compress >> "${DRACUT_TMPDIR}/initramfs.img"
); then
dfatal "dracut: creation of $outfile failed"
exit 1
fi
fi
# shellcheck disable=SC2154
if ((maxloglvl >= 5)) && ((verbosity_mod_l >= 0)); then
if [[ $allowlocal ]]; then
"$dracutbasedir/lsinitrd.sh" "${DRACUT_TMPDIR}/initramfs.img" | ddebug
else
lsinitrd "${DRACUT_TMPDIR}/initramfs.img" | ddebug
fi
fi
umask 077
SBAT_DEFAULT="sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md"
sbat_out=$uefi_outdir/uki.sbat
clean_sbat_string() {
local inp=$1
local temp=$uefi_outdir/temp.sbat
sed "/${SBAT_DEFAULT//\//\\/}/d" "$inp" > "$temp"
[[ -s $temp ]] && cat "$temp" >> "$sbat_out"
rm "$temp"
}
get_sbat_string() {
local inp=$1
local out=$uefi_outdir/$2
objcopy -O binary --only-section=.sbat "$inp" "$out"
clean_sbat_string "$out"
}
if [[ $uefi == yes ]]; then
if [[ $kernel_cmdline ]]; then
echo -n "$kernel_cmdline" > "$uefi_outdir/cmdline.txt"
elif [[ $hostonly_cmdline == yes ]] && [ -d "$initdir/etc/cmdline.d" ]; then
for conf in "$initdir"/etc/cmdline.d/*.conf; do
[ -e "$conf" ] || continue
printf "%s " "$(< "$conf")" >> "$uefi_outdir/cmdline.txt"
done
fi
# shellcheck disable=SC1004
offs=$(objdump -h "$uefi_stub" 2> /dev/null | gawk 'NF==7 {size=strtonum("0x"$3);\
offset=strtonum("0x"$4)} END {print size + offset}')
if [[ $offs -eq 0 ]]; then
dfatal "Failed to get the size of $uefi_stub to create UEFI image file"
exit 1
fi
align=$(pe_get_section_align "$uefi_stub")
if [[ $? -eq 1 ]]; then
dfatal "Failed to get the SectionAlignment of the stub PE header to create the UEFI image file"
exit 1
fi
offs=$((offs + "$align" - offs % "$align"))
[[ -s $dracutsysrootdir/usr/lib/os-release ]] && uefi_osrelease="$dracutsysrootdir/usr/lib/os-release"
[[ -s $dracutsysrootdir/etc/os-release ]] && uefi_osrelease="$dracutsysrootdir/etc/os-release"
[[ -s $uefi_osrelease ]] \
&& uefi_osrelease_offs=${offs} \
&& offs=$((offs + $(stat -Lc%s "$uefi_osrelease"))) \
&& offs=$((offs + "$align" - offs % "$align"))
if [[ $kernel_cmdline ]] || [[ $hostonly_cmdline == yes && -d "$initdir/etc/cmdline.d" ]]; then
echo -ne "\x00" >> "$uefi_outdir/cmdline.txt"
dinfo "Using UEFI kernel cmdline:"
dinfo "$(tr -d '\000' < "$uefi_outdir/cmdline.txt")"
uefi_cmdline="${uefi_outdir}/cmdline.txt"
uefi_cmdline_offs=${offs}
offs=$((offs + $(stat -Lc%s "$uefi_cmdline")))
offs=$((offs + "$align" - offs % "$align"))
else
unset uefi_cmdline
fi
if [[ -s ${dracutsysrootdir}${uefi_splash_image} ]]; then
uefi_splash_image="${dracutsysrootdir}${uefi_splash_image}"
uefi_splash_offs=${offs}
offs=$((offs + $(stat -Lc%s "$uefi_splash_image")))
offs=$((offs + "$align" - offs % "$align"))
else
unset uefi_splash_image
fi
echo "$SBAT_DEFAULT" > "$sbat_out"
if [[ -n $sbat ]]; then
echo "$sbat" | sed "/${SBAT_DEFAULT//\//\\/}/d" >> "$sbat_out"
fi
get_sbat_string "$kernel_image" kernel.sbat
get_sbat_string "$uefi_stub" stub.sbat
uefi_sbat_offs="${offs}"
offs=$((offs + $(stat -Lc%s "$sbat_out")))
offs=$((offs + "$align" - offs % "$align"))
uefi_linux_offs="${offs}"
offs=$((offs + $(stat -Lc%s "$kernel_image")))
offs=$((offs + "$align" - offs % "$align"))
uefi_initrd_offs="${offs}"
base_image=$(pe_get_image_base "$uefi_stub")
if [[ $? -eq 1 ]]; then
dfatal "Failed to get ImageBase data of $uefi_stub to create UEFI image file"
exit 1
fi
tmp_uefi_stub=$uefi_outdir/elf.stub
cp "$uefi_stub" "$tmp_uefi_stub"
objcopy --remove-section .sbat "$tmp_uefi_stub" &> /dev/null
if objcopy \
${uefi_osrelease:+--add-section .osrel="$uefi_osrelease" --change-section-vma .osrel=$(printf 0x%x "$uefi_osrelease_offs")} \
${uefi_cmdline:+--add-section .cmdline="$uefi_cmdline" --change-section-vma .cmdline=$(printf 0x%x "$uefi_cmdline_offs")} \
${uefi_splash_image:+--add-section .splash="$uefi_splash_image" --change-section-vma .splash=$(printf 0x%x "$uefi_splash_offs")} \
--add-section .sbat="$sbat_out" --change-section-vma .sbat="$(printf 0x%x "$uefi_sbat_offs")" \
--add-section .linux="$kernel_image" --change-section-vma .linux="$(printf 0x%x "$uefi_linux_offs")" \
--add-section .initrd="${DRACUT_TMPDIR}/initramfs.img" --change-section-vma .initrd="$(printf 0x%x "$uefi_initrd_offs")" \
--image-base="$(printf 0x%x "$base_image")" \
"$tmp_uefi_stub" "${uefi_outdir}/linux.efi"; then
if [[ -n ${uefi_secureboot_key} && -n ${uefi_secureboot_cert} ]]; then
if sbsign \
--key "${uefi_secureboot_key}" \
--cert "${uefi_secureboot_cert}" \
--output "$outfile" "${uefi_outdir}/linux.efi"; then
dinfo "*** Creating signed UEFI image file '$outfile' done ***"
else
dfatal "*** Creating signed UEFI image file '$outfile' failed ***"
exit 1
fi
else
if cp --reflink=auto "${uefi_outdir}/linux.efi" "$outfile"; then
dinfo "*** Creating UEFI image file '$outfile' done ***"
fi
fi
else
rm -f -- "$outfile"
dfatal "*** Creating UEFI image file '$outfile' failed ***"
exit 1
fi
else
if cp --reflink=auto "${DRACUT_TMPDIR}/initramfs.img" "$outfile"; then
dinfo "*** Creating initramfs image file '$outfile' done ***"
else
rm -f -- "$outfile"
dfatal "dracut: creation of $outfile failed"
exit 1
fi
fi
btrfs_uuid() {
btrfs filesystem show "$1" | sed -n '1s/^.*uuid: //p'
}
freeze_ok_for_btrfs() {
local mnt uuid1 uuid2
# If the output file is on btrfs, we need to make sure that it's
# not on a subvolume of the same file system as the root FS.
# Otherwise, fsfreeze() might freeze the entire system.
# This is most conveniently checked by comparing the FS uuid.
[[ "$(stat -f -c %T -- "/")" == "btrfs" ]] || return 0
mnt=$(stat -c %m -- "$1")
uuid1=$(btrfs_uuid "$mnt")
uuid2=$(btrfs_uuid "/")
[[ $uuid1 && $uuid2 && $uuid1 != "$uuid2" ]]
}
freeze_ok_for_fstype() {
local outfile=$1
local fstype
[[ "$(stat -c %m -- "$outfile")" == "/" ]] && return 1
fstype=$(stat -f -c %T -- "$outfile")
case $fstype in
msdos)
return 1
;;
zfs)
return 1
;;
btrfs)
freeze_ok_for_btrfs "$outfile"
;;
*)
return 0
;;
esac
}
# We sync/fsfreeze only if we're operating on a live booted system.
# It's possible for e.g. `kernel` to be installed as an RPM BuildRequires or equivalent,
# and there's no reason to sync, and *definitely* no reason to fsfreeze.
# Another case where this happens is rpm-ostree, which performs its own sync/fsfreeze
# globally. See e.g. https://github.com/ostreedev/ostree/commit/8642ef5ab3fec3ac8eb8f193054852f83a8bc4d0
if [[ -d $dracutsysrootdir/run/systemd/system ]]; then
if ! sync "$outfile" 2> /dev/null; then
dinfo "dracut: sync operation on newly created initramfs $outfile failed"
exit 1
fi
# use fsfreeze only if we're not writing to /
if [[ "$(stat -c %m -- "$outfile")" != "/" ]] && freeze_ok_for_fstype "$outfile"; then
FSFROZEN="$(dirname "$outfile")"
if ! (fsfreeze -f "${FSFROZEN}" 2> /dev/null && fsfreeze -u "${FSFROZEN}" 2> /dev/null); then
dinfo "dracut: warning: could not fsfreeze $(dirname "$outfile")"
fi
unset FSFROZEN
fi
fi
exit 0
Zerion Mini Shell 1.0