Mini Shell
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* VFIO API definition
*
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef VFIO_H
#define VFIO_H
#include <linux/types.h>
#include <linux/ioctl.h>
#define VFIO_API_VERSION 0
/* Kernel & User level defines for VFIO IOCTLs. */
/* Extensions */
#define VFIO_TYPE1_IOMMU 1
#define VFIO_SPAPR_TCE_IOMMU 2
#define VFIO_TYPE1v2_IOMMU 3
/*
* IOMMU enforces DMA cache coherence (ex. PCIe NoSnoop stripping). This
* capability is subject to change as groups are added or removed.
*/
#define VFIO_DMA_CC_IOMMU 4
/* Check if EEH is supported */
#define VFIO_EEH 5
/* Two-stage IOMMU */
#define VFIO_TYPE1_NESTING_IOMMU 6 /* Implies v2 */
#define VFIO_SPAPR_TCE_v2_IOMMU 7
/*
* The No-IOMMU IOMMU offers no translation or isolation for devices and
* supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU
* code will taint the host kernel and should be used with extreme caution.
*/
#define VFIO_NOIOMMU_IOMMU 8
/* Supports VFIO_DMA_UNMAP_FLAG_ALL */
#define VFIO_UNMAP_ALL 9
/*
* Supports the vaddr flag for DMA map and unmap. Not supported for mediated
* devices, so this capability is subject to change as groups are added or
* removed.
*/
#define VFIO_UPDATE_VADDR 10
/*
* The IOCTL interface is designed for extensibility by embedding the
* structure length (argsz) and flags into structures passed between
* kernel and userspace. We therefore use the _IO() macro for these
* defines to avoid implicitly embedding a size into the ioctl request.
* As structure fields are added, argsz will increase to match and flag
* bits will be defined to indicate additional fields with valid data.
* It's *always* the caller's responsibility to indicate the size of
* the structure passed by setting argsz appropriately.
*/
#define VFIO_TYPE (';')
#define VFIO_BASE 100
/*
* For extension of INFO ioctls, VFIO makes use of a capability chain
* designed after PCI/e capabilities. A flag bit indicates whether
* this capability chain is supported and a field defined in the fixed
* structure defines the offset of the first capability in the chain.
* This field is only valid when the corresponding bit in the flags
* bitmap is set. This offset field is relative to the start of the
* INFO buffer, as is the next field within each capability header.
* The id within the header is a shared address space per INFO ioctl,
* while the version field is specific to the capability id. The
* contents following the header are specific to the capability id.
*/
struct vfio_info_cap_header {
__u16 id; /* Identifies capability */
__u16 version; /* Version specific to the capability ID */
__u32 next; /* Offset of next capability */
};
/*
* Callers of INFO ioctls passing insufficiently sized buffers will see
* the capability chain flag bit set, a zero value for the first capability
* offset (if available within the provided argsz), and argsz will be
* updated to report the necessary buffer size. For compatibility, the
* INFO ioctl will not report error in this case, but the capability chain
* will not be available.
*/
/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
/**
* VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
*
* Report the version of the VFIO API. This allows us to bump the entire
* API version should we later need to add or change features in incompatible
* ways.
* Return: VFIO_API_VERSION
* Availability: Always
*/
#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
/**
* VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
*
* Check whether an extension is supported.
* Return: 0 if not supported, 1 (or some other positive integer) if supported.
* Availability: Always
*/
#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
/**
* VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
*
* Set the iommu to the given type. The type must be supported by an
* iommu driver as verified by calling CHECK_EXTENSION using the same
* type. A group must be set to this file descriptor before this
* ioctl is available. The IOMMU interfaces enabled by this call are
* specific to the value set.
* Return: 0 on success, -errno on failure
* Availability: When VFIO group attached
*/
#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
/**
* VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
* struct vfio_group_status)
*
* Retrieve information about the group. Fills in provided
* struct vfio_group_info. Caller sets argsz.
* Return: 0 on succes, -errno on failure.
* Availability: Always
*/
struct vfio_group_status {
__u32 argsz;
__u32 flags;
#define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
};
#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
/**
* VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
*
* Set the container for the VFIO group to the open VFIO file
* descriptor provided. Groups may only belong to a single
* container. Containers may, at their discretion, support multiple
* groups. Only when a container is set are all of the interfaces
* of the VFIO file descriptor and the VFIO group file descriptor
* available to the user.
* Return: 0 on success, -errno on failure.
* Availability: Always
*/
#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
/**
* VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
*
* Remove the group from the attached container. This is the
* opposite of the SET_CONTAINER call and returns the group to
* an initial state. All device file descriptors must be released
* prior to calling this interface. When removing the last group
* from a container, the IOMMU will be disabled and all state lost,
* effectively also returning the VFIO file descriptor to an initial
* state.
* Return: 0 on success, -errno on failure.
* Availability: When attached to container
*/
#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
/**
* VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
*
* Return a new file descriptor for the device object described by
* the provided string. The string should match a device listed in
* the devices subdirectory of the IOMMU group sysfs entry. The
* group containing the device must already be added to this context.
* Return: new file descriptor on success, -errno on failure.
* Availability: When attached to container
*/
#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
/* --------------- IOCTLs for DEVICE file descriptors --------------- */
/**
* VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
* struct vfio_device_info)
*
* Retrieve information about the device. Fills in provided
* struct vfio_device_info. Caller sets argsz.
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_info {
__u32 argsz;
__u32 flags;
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
#define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
#define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
#define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */
#define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */
#define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6) /* vfio-fsl-mc device */
#define VFIO_DEVICE_FLAGS_CAPS (1 << 7) /* Info supports caps */
__u32 num_regions; /* Max region index + 1 */
__u32 num_irqs; /* Max IRQ index + 1 */
__u32 cap_offset; /* Offset within info struct of first cap */
__u32 pad;
};
#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
/*
* Vendor driver using Mediated device framework should provide device_api
* attribute in supported type attribute groups. Device API string should be one
* of the following corresponding to device flags in vfio_device_info structure.
*/
#define VFIO_DEVICE_API_PCI_STRING "vfio-pci"
#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform"
#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba"
#define VFIO_DEVICE_API_CCW_STRING "vfio-ccw"
#define VFIO_DEVICE_API_AP_STRING "vfio-ap"
/*
* The following capabilities are unique to s390 zPCI devices. Their contents
* are further-defined in vfio_zdev.h
*/
#define VFIO_DEVICE_INFO_CAP_ZPCI_BASE 1
#define VFIO_DEVICE_INFO_CAP_ZPCI_GROUP 2
#define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL 3
#define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP 4
/*
* The following VFIO_DEVICE_INFO capability reports support for PCIe AtomicOp
* completion to the root bus with supported widths provided via flags.
*/
#define VFIO_DEVICE_INFO_CAP_PCI_ATOMIC_COMP 5
struct vfio_device_info_cap_pci_atomic_comp {
struct vfio_info_cap_header header;
__u32 flags;
#define VFIO_PCI_ATOMIC_COMP32 (1 << 0)
#define VFIO_PCI_ATOMIC_COMP64 (1 << 1)
#define VFIO_PCI_ATOMIC_COMP128 (1 << 2)
__u32 reserved;
};
/**
* VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
* struct vfio_region_info)
*
* Retrieve information about a device region. Caller provides
* struct vfio_region_info with index value set. Caller sets argsz.
* Implementation of region mapping is bus driver specific. This is
* intended to describe MMIO, I/O port, as well as bus specific
* regions (ex. PCI config space). Zero sized regions may be used
* to describe unimplemented regions (ex. unimplemented PCI BARs).
* Return: 0 on success, -errno on failure.
*/
struct vfio_region_info {
__u32 argsz;
__u32 flags;
#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
#define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */
__u32 index; /* Region index */
__u32 cap_offset; /* Offset within info struct of first cap */
__aligned_u64 size; /* Region size (bytes) */
__aligned_u64 offset; /* Region offset from start of device fd */
};
#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
/*
* The sparse mmap capability allows finer granularity of specifying areas
* within a region with mmap support. When specified, the user should only
* mmap the offset ranges specified by the areas array. mmaps outside of the
* areas specified may fail (such as the range covering a PCI MSI-X table) or
* may result in improper device behavior.
*
* The structures below define version 1 of this capability.
*/
#define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1
struct vfio_region_sparse_mmap_area {
__aligned_u64 offset; /* Offset of mmap'able area within region */
__aligned_u64 size; /* Size of mmap'able area */
};
struct vfio_region_info_cap_sparse_mmap {
struct vfio_info_cap_header header;
__u32 nr_areas;
__u32 reserved;
struct vfio_region_sparse_mmap_area areas[];
};
/*
* The device specific type capability allows regions unique to a specific
* device or class of devices to be exposed. This helps solve the problem for
* vfio bus drivers of defining which region indexes correspond to which region
* on the device, without needing to resort to static indexes, as done by
* vfio-pci. For instance, if we were to go back in time, we might remove
* VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
* greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
* make a "VGA" device specific type to describe the VGA access space. This
* means that non-VGA devices wouldn't need to waste this index, and thus the
* address space associated with it due to implementation of device file
* descriptor offsets in vfio-pci.
*
* The current implementation is now part of the user ABI, so we can't use this
* for VGA, but there are other upcoming use cases, such as opregions for Intel
* IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll
* use this for future additions.
*
* The structure below defines version 1 of this capability.
*/
#define VFIO_REGION_INFO_CAP_TYPE 2
struct vfio_region_info_cap_type {
struct vfio_info_cap_header header;
__u32 type; /* global per bus driver */
__u32 subtype; /* type specific */
};
/*
* List of region types, global per bus driver.
* If you introduce a new type, please add it here.
*/
/* PCI region type containing a PCI vendor part */
#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31)
#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
#define VFIO_REGION_TYPE_GFX (1)
#define VFIO_REGION_TYPE_CCW (2)
#define VFIO_REGION_TYPE_MIGRATION_DEPRECATED (3)
/* sub-types for VFIO_REGION_TYPE_PCI_* */
/* 8086 vendor PCI sub-types */
#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG (2)
#define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3)
/* 10de vendor PCI sub-types */
/*
* NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
*
* Deprecated, region no longer provided
*/
#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1)
/* 1014 vendor PCI sub-types */
/*
* IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
* to do TLB invalidation on a GPU.
*
* Deprecated, region no longer provided
*/
#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1)
/* sub-types for VFIO_REGION_TYPE_GFX */
#define VFIO_REGION_SUBTYPE_GFX_EDID (1)
/**
* struct vfio_region_gfx_edid - EDID region layout.
*
* Set display link state and EDID blob.
*
* The EDID blob has monitor information such as brand, name, serial
* number, physical size, supported video modes and more.
*
* This special region allows userspace (typically qemu) set a virtual
* EDID for the virtual monitor, which allows a flexible display
* configuration.
*
* For the edid blob spec look here:
* https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
*
* On linux systems you can find the EDID blob in sysfs:
* /sys/class/drm/${card}/${connector}/edid
*
* You can use the edid-decode ulility (comes with xorg-x11-utils) to
* decode the EDID blob.
*
* @edid_offset: location of the edid blob, relative to the
* start of the region (readonly).
* @edid_max_size: max size of the edid blob (readonly).
* @edid_size: actual edid size (read/write).
* @link_state: display link state (read/write).
* VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
* VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
* @max_xres: max display width (0 == no limitation, readonly).
* @max_yres: max display height (0 == no limitation, readonly).
*
* EDID update protocol:
* (1) set link-state to down.
* (2) update edid blob and size.
* (3) set link-state to up.
*/
struct vfio_region_gfx_edid {
__u32 edid_offset;
__u32 edid_max_size;
__u32 edid_size;
__u32 max_xres;
__u32 max_yres;
__u32 link_state;
#define VFIO_DEVICE_GFX_LINK_STATE_UP 1
#define VFIO_DEVICE_GFX_LINK_STATE_DOWN 2
};
/* sub-types for VFIO_REGION_TYPE_CCW */
#define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1)
#define VFIO_REGION_SUBTYPE_CCW_SCHIB (2)
#define VFIO_REGION_SUBTYPE_CCW_CRW (3)
/* sub-types for VFIO_REGION_TYPE_MIGRATION */
#define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
struct vfio_device_migration_info {
__u32 device_state; /* VFIO device state */
#define VFIO_DEVICE_STATE_V1_STOP (0)
#define VFIO_DEVICE_STATE_V1_RUNNING (1 << 0)
#define VFIO_DEVICE_STATE_V1_SAVING (1 << 1)
#define VFIO_DEVICE_STATE_V1_RESUMING (1 << 2)
#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_V1_RUNNING | \
VFIO_DEVICE_STATE_V1_SAVING | \
VFIO_DEVICE_STATE_V1_RESUMING)
#define VFIO_DEVICE_STATE_VALID(state) \
(state & VFIO_DEVICE_STATE_V1_RESUMING ? \
(state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
#define VFIO_DEVICE_STATE_IS_ERROR(state) \
((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | \
VFIO_DEVICE_STATE_V1_RESUMING))
#define VFIO_DEVICE_STATE_SET_ERROR(state) \
((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | \
VFIO_DEVICE_STATE_V1_RESUMING)
__u32 reserved;
__aligned_u64 pending_bytes;
__aligned_u64 data_offset;
__aligned_u64 data_size;
};
/*
* The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
* which allows direct access to non-MSIX registers which happened to be within
* the same system page.
*
* Even though the userspace gets direct access to the MSIX data, the existing
* VFIO_DEVICE_SET_IRQS interface must still be used for MSIX configuration.
*/
#define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE 3
/*
* Capability with compressed real address (aka SSA - small system address)
* where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing
* and by the userspace to associate a NVLink bridge with a GPU.
*
* Deprecated, capability no longer provided
*/
#define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4
struct vfio_region_info_cap_nvlink2_ssatgt {
struct vfio_info_cap_header header;
__aligned_u64 tgt;
};
/*
* Capability with an NVLink link speed. The value is read by
* the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed"
* property in the device tree. The value is fixed in the hardware
* and failing to provide the correct value results in the link
* not working with no indication from the driver why.
*
* Deprecated, capability no longer provided
*/
#define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5
struct vfio_region_info_cap_nvlink2_lnkspd {
struct vfio_info_cap_header header;
__u32 link_speed;
__u32 __pad;
};
/**
* VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
* struct vfio_irq_info)
*
* Retrieve information about a device IRQ. Caller provides
* struct vfio_irq_info with index value set. Caller sets argsz.
* Implementation of IRQ mapping is bus driver specific. Indexes
* using multiple IRQs are primarily intended to support MSI-like
* interrupt blocks. Zero count irq blocks may be used to describe
* unimplemented interrupt types.
*
* The EVENTFD flag indicates the interrupt index supports eventfd based
* signaling.
*
* The MASKABLE flags indicates the index supports MASK and UNMASK
* actions described below.
*
* AUTOMASKED indicates that after signaling, the interrupt line is
* automatically masked by VFIO and the user needs to unmask the line
* to receive new interrupts. This is primarily intended to distinguish
* level triggered interrupts.
*
* The NORESIZE flag indicates that the interrupt lines within the index
* are setup as a set and new subindexes cannot be enabled without first
* disabling the entire index. This is used for interrupts like PCI MSI
* and MSI-X where the driver may only use a subset of the available
* indexes, but VFIO needs to enable a specific number of vectors
* upfront. In the case of MSI-X, where the user can enable MSI-X and
* then add and unmask vectors, it's up to userspace to make the decision
* whether to allocate the maximum supported number of vectors or tear
* down setup and incrementally increase the vectors as each is enabled.
* Absence of the NORESIZE flag indicates that vectors can be enabled
* and disabled dynamically without impacting other vectors within the
* index.
*/
struct vfio_irq_info {
__u32 argsz;
__u32 flags;
#define VFIO_IRQ_INFO_EVENTFD (1 << 0)
#define VFIO_IRQ_INFO_MASKABLE (1 << 1)
#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
#define VFIO_IRQ_INFO_NORESIZE (1 << 3)
__u32 index; /* IRQ index */
__u32 count; /* Number of IRQs within this index */
};
#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
/**
* VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
*
* Set signaling, masking, and unmasking of interrupts. Caller provides
* struct vfio_irq_set with all fields set. 'start' and 'count' indicate
* the range of subindexes being specified.
*
* The DATA flags specify the type of data provided. If DATA_NONE, the
* operation performs the specified action immediately on the specified
* interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
* flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
*
* DATA_BOOL allows sparse support for the same on arrays of interrupts.
* For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
* flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
* data = {1,0,1}
*
* DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
* A value of -1 can be used to either de-assign interrupts if already
* assigned or skip un-assigned interrupts. For example, to set an eventfd
* to be trigger for interrupts [0,0] and [0,2]:
* flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
* data = {fd1, -1, fd2}
* If index [0,1] is previously set, two count = 1 ioctls calls would be
* required to set [0,0] and [0,2] without changing [0,1].
*
* Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
* with ACTION_TRIGGER to perform kernel level interrupt loopback testing
* from userspace (ie. simulate hardware triggering).
*
* Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
* enables the interrupt index for the device. Individual subindex interrupts
* can be disabled using the -1 value for DATA_EVENTFD or the index can be
* disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
*
* Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
* ACTION_TRIGGER specifies kernel->user signaling.
*/
struct vfio_irq_set {
__u32 argsz;
__u32 flags;
#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
__u32 index;
__u32 start;
__u32 count;
__u8 data[];
};
#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
VFIO_IRQ_SET_DATA_BOOL | \
VFIO_IRQ_SET_DATA_EVENTFD)
#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
VFIO_IRQ_SET_ACTION_UNMASK | \
VFIO_IRQ_SET_ACTION_TRIGGER)
/**
* VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
*
* Reset a device.
*/
#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
/*
* The VFIO-PCI bus driver makes use of the following fixed region and
* IRQ index mapping. Unimplemented regions return a size of zero.
* Unimplemented IRQ types return a count of zero.
*/
enum {
VFIO_PCI_BAR0_REGION_INDEX,
VFIO_PCI_BAR1_REGION_INDEX,
VFIO_PCI_BAR2_REGION_INDEX,
VFIO_PCI_BAR3_REGION_INDEX,
VFIO_PCI_BAR4_REGION_INDEX,
VFIO_PCI_BAR5_REGION_INDEX,
VFIO_PCI_ROM_REGION_INDEX,
VFIO_PCI_CONFIG_REGION_INDEX,
/*
* Expose VGA regions defined for PCI base class 03, subclass 00.
* This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df
* as well as the MMIO range 0xa0000 to 0xbffff. Each implemented
* range is found at it's identity mapped offset from the region
* offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas
* between described ranges are unimplemented.
*/
VFIO_PCI_VGA_REGION_INDEX,
VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
/* device specific cap to define content. */
};
enum {
VFIO_PCI_INTX_IRQ_INDEX,
VFIO_PCI_MSI_IRQ_INDEX,
VFIO_PCI_MSIX_IRQ_INDEX,
VFIO_PCI_ERR_IRQ_INDEX,
VFIO_PCI_REQ_IRQ_INDEX,
VFIO_PCI_NUM_IRQS
};
/*
* The vfio-ccw bus driver makes use of the following fixed region and
* IRQ index mapping. Unimplemented regions return a size of zero.
* Unimplemented IRQ types return a count of zero.
*/
enum {
VFIO_CCW_CONFIG_REGION_INDEX,
VFIO_CCW_NUM_REGIONS
};
enum {
VFIO_CCW_IO_IRQ_INDEX,
VFIO_CCW_CRW_IRQ_INDEX,
VFIO_CCW_REQ_IRQ_INDEX,
VFIO_CCW_NUM_IRQS
};
/*
* The vfio-ap bus driver makes use of the following IRQ index mapping.
* Unimplemented IRQ types return a count of zero.
*/
enum {
VFIO_AP_REQ_IRQ_INDEX,
VFIO_AP_NUM_IRQS
};
/**
* VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
* struct vfio_pci_hot_reset_info)
*
* This command is used to query the affected devices in the hot reset for
* a given device.
*
* This command always reports the segment, bus, and devfn information for
* each affected device, and selectively reports the group_id or devid per
* the way how the calling device is opened.
*
* - If the calling device is opened via the traditional group/container
* API, group_id is reported. User should check if it has owned all
* the affected devices and provides a set of group fds to prove the
* ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl.
*
* - If the calling device is opened as a cdev, devid is reported.
* Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this
* data type. All the affected devices should be represented in
* the dev_set, ex. bound to a vfio driver, and also be owned by
* this interface which is determined by the following conditions:
* 1) Has a valid devid within the iommufd_ctx of the calling device.
* Ownership cannot be determined across separate iommufd_ctx and
* the cdev calling conventions do not support a proof-of-ownership
* model as provided in the legacy group interface. In this case
* valid devid with value greater than zero is provided in the return
* structure.
* 2) Does not have a valid devid within the iommufd_ctx of the calling
* device, but belongs to the same IOMMU group as the calling device
* or another opened device that has a valid devid within the
* iommufd_ctx of the calling device. This provides implicit ownership
* for devices within the same DMA isolation context. In this case
* the devid value of VFIO_PCI_DEVID_OWNED is provided in the return
* structure.
*
* A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return
* structure for affected devices where device is NOT represented in the
* dev_set or ownership is not available. Such devices prevent the use
* of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership
* calling conventions (ie. via legacy group accessed devices). Flag
* VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the
* affected devices are represented in the dev_set and also owned by
* the user. This flag is available only when
* flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved.
* When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero
* length fd array on the calling device as the ownership is validated
* by iommufd_ctx.
*
* Return: 0 on success, -errno on failure:
* -enospc = insufficient buffer, -enodev = unsupported for device.
*/
struct vfio_pci_dependent_device {
union {
__u32 group_id;
__u32 devid;
#define VFIO_PCI_DEVID_OWNED 0
#define VFIO_PCI_DEVID_NOT_OWNED -1
};
__u16 segment;
__u8 bus;
__u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
};
struct vfio_pci_hot_reset_info {
__u32 argsz;
__u32 flags;
#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID (1 << 0)
#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED (1 << 1)
__u32 count;
struct vfio_pci_dependent_device devices[];
};
#define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/**
* VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
* struct vfio_pci_hot_reset)
*
* A PCI hot reset results in either a bus or slot reset which may affect
* other devices sharing the bus/slot. The calling user must have
* ownership of the full set of affected devices as determined by the
* VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl.
*
* When called on a device file descriptor acquired through the vfio
* group interface, the user is required to provide proof of ownership
* of those affected devices via the group_fds array in struct
* vfio_pci_hot_reset.
*
* When called on a direct cdev opened vfio device, the flags field of
* struct vfio_pci_hot_reset_info reports the ownership status of the
* affected devices and this ioctl must be called with an empty group_fds
* array. See above INFO ioctl definition for ownership requirements.
*
* Mixed usage of legacy groups and cdevs across the set of affected
* devices is not supported.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_pci_hot_reset {
__u32 argsz;
__u32 flags;
__u32 count;
__s32 group_fds[];
};
#define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
/**
* VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
* struct vfio_device_query_gfx_plane)
*
* Set the drm_plane_type and flags, then retrieve the gfx plane info.
*
* flags supported:
* - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
* to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
* support for dma-buf.
* - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
* to ask if the mdev supports region. 0 on support, -EINVAL on no
* support for region.
* - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
* with each call to query the plane info.
* - Others are invalid and return -EINVAL.
*
* Note:
* 1. Plane could be disabled by guest. In that case, success will be
* returned with zero-initialized drm_format, size, width and height
* fields.
* 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
*
* Return: 0 on success, -errno on other failure.
*/
struct vfio_device_gfx_plane_info {
__u32 argsz;
__u32 flags;
#define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
#define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
#define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
/* in */
__u32 drm_plane_type; /* type of plane: DRM_PLANE_TYPE_* */
/* out */
__u32 drm_format; /* drm format of plane */
__aligned_u64 drm_format_mod; /* tiled mode */
__u32 width; /* width of plane */
__u32 height; /* height of plane */
__u32 stride; /* stride of plane */
__u32 size; /* size of plane in bytes, align on page*/
__u32 x_pos; /* horizontal position of cursor plane */
__u32 y_pos; /* vertical position of cursor plane*/
__u32 x_hot; /* horizontal position of cursor hotspot */
__u32 y_hot; /* vertical position of cursor hotspot */
union {
__u32 region_index; /* region index */
__u32 dmabuf_id; /* dma-buf id */
};
__u32 reserved;
};
#define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
/**
* VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
*
* Return a new dma-buf file descriptor for an exposed guest framebuffer
* described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
* DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
*/
#define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
/**
* VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16,
* struct vfio_device_ioeventfd)
*
* Perform a write to the device at the specified device fd offset, with
* the specified data and width when the provided eventfd is triggered.
* vfio bus drivers may not support this for all regions, for all widths,
* or at all. vfio-pci currently only enables support for BAR regions,
* excluding the MSI-X vector table.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_ioeventfd {
__u32 argsz;
__u32 flags;
#define VFIO_DEVICE_IOEVENTFD_8 (1 << 0) /* 1-byte write */
#define VFIO_DEVICE_IOEVENTFD_16 (1 << 1) /* 2-byte write */
#define VFIO_DEVICE_IOEVENTFD_32 (1 << 2) /* 4-byte write */
#define VFIO_DEVICE_IOEVENTFD_64 (1 << 3) /* 8-byte write */
#define VFIO_DEVICE_IOEVENTFD_SIZE_MASK (0xf)
__aligned_u64 offset; /* device fd offset of write */
__aligned_u64 data; /* data to be written */
__s32 fd; /* -1 for de-assignment */
__u32 reserved;
};
#define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16)
/**
* VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
* struct vfio_device_feature)
*
* Get, set, or probe feature data of the device. The feature is selected
* using the FEATURE_MASK portion of the flags field. Support for a feature
* can be probed by setting both the FEATURE_MASK and PROBE bits. A probe
* may optionally include the GET and/or SET bits to determine read vs write
* access of the feature respectively. Probing a feature will return success
* if the feature is supported and all of the optionally indicated GET/SET
* methods are supported. The format of the data portion of the structure is
* specific to the given feature. The data portion is not required for
* probing. GET and SET are mutually exclusive, except for use with PROBE.
*
* Return 0 on success, -errno on failure.
*/
struct vfio_device_feature {
__u32 argsz;
__u32 flags;
#define VFIO_DEVICE_FEATURE_MASK (0xffff) /* 16-bit feature index */
#define VFIO_DEVICE_FEATURE_GET (1 << 16) /* Get feature into data[] */
#define VFIO_DEVICE_FEATURE_SET (1 << 17) /* Set feature from data[] */
#define VFIO_DEVICE_FEATURE_PROBE (1 << 18) /* Probe feature support */
__u8 data[];
};
#define VFIO_DEVICE_FEATURE _IO(VFIO_TYPE, VFIO_BASE + 17)
/*
* VFIO_DEVICE_BIND_IOMMUFD - _IOR(VFIO_TYPE, VFIO_BASE + 18,
* struct vfio_device_bind_iommufd)
* @argsz: User filled size of this data.
* @flags: Must be 0.
* @iommufd: iommufd to bind.
* @out_devid: The device id generated by this bind. devid is a handle for
* this device/iommufd bond and can be used in IOMMUFD commands.
*
* Bind a vfio_device to the specified iommufd.
*
* User is restricted from accessing the device before the binding operation
* is completed. Only allowed on cdev fds.
*
* Unbind is automatically conducted when device fd is closed.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_bind_iommufd {
__u32 argsz;
__u32 flags;
__s32 iommufd;
__u32 out_devid;
};
#define VFIO_DEVICE_BIND_IOMMUFD _IO(VFIO_TYPE, VFIO_BASE + 18)
/*
* VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19,
* struct vfio_device_attach_iommufd_pt)
* @argsz: User filled size of this data.
* @flags: Must be 0.
* @pt_id: Input the target id which can represent an ioas or a hwpt
* allocated via iommufd subsystem.
* Output the input ioas id or the attached hwpt id which could
* be the specified hwpt itself or a hwpt automatically created
* for the specified ioas by kernel during the attachment.
*
* Associate the device with an address space within the bound iommufd.
* Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. This is only
* allowed on cdev fds.
*
* If a vfio device is currently attached to a valid hw_pagetable, without doing
* a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl
* passing in another hw_pagetable (hwpt) id is allowed. This action, also known
* as a hw_pagetable replacement, will replace the device's currently attached
* hw_pagetable with a new hw_pagetable corresponding to the given pt_id.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_attach_iommufd_pt {
__u32 argsz;
__u32 flags;
__u32 pt_id;
};
#define VFIO_DEVICE_ATTACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 19)
/*
* VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20,
* struct vfio_device_detach_iommufd_pt)
* @argsz: User filled size of this data.
* @flags: Must be 0.
*
* Remove the association of the device and its current associated address
* space. After it, the device should be in a blocking DMA state. This is only
* allowed on cdev fds.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_detach_iommufd_pt {
__u32 argsz;
__u32 flags;
};
#define VFIO_DEVICE_DETACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 20)
/*
* Provide support for setting a PCI VF Token, which is used as a shared
* secret between PF and VF drivers. This feature may only be set on a
* PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
* open VFs. Data provided when setting this feature is a 16-byte array
* (__u8 b[16]), representing a UUID.
*/
#define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN (0)
/*
* Indicates the device can support the migration API through
* VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. If this GET succeeds, the RUNNING and
* ERROR states are always supported. Support for additional states is
* indicated via the flags field; at least VFIO_MIGRATION_STOP_COPY must be
* set.
*
* VFIO_MIGRATION_STOP_COPY means that STOP, STOP_COPY and
* RESUMING are supported.
*
* VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
* is supported in addition to the STOP_COPY states.
*
* VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that
* PRE_COPY is supported in addition to the STOP_COPY states.
*
* VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY
* means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported
* in addition to the STOP_COPY states.
*
* Other combinations of flags have behavior to be defined in the future.
*/
struct vfio_device_feature_migration {
__aligned_u64 flags;
#define VFIO_MIGRATION_STOP_COPY (1 << 0)
#define VFIO_MIGRATION_P2P (1 << 1)
#define VFIO_MIGRATION_PRE_COPY (1 << 2)
};
#define VFIO_DEVICE_FEATURE_MIGRATION 1
/*
* Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO
* device. The new state is supplied in device_state, see enum
* vfio_device_mig_state for details
*
* The kernel migration driver must fully transition the device to the new state
* value before the operation returns to the user.
*
* The kernel migration driver must not generate asynchronous device state
* transitions outside of manipulation by the user or the VFIO_DEVICE_RESET
* ioctl as described above.
*
* If this function fails then current device_state may be the original
* operating state or some other state along the combination transition path.
* The user can then decide if it should execute a VFIO_DEVICE_RESET, attempt
* to return to the original state, or attempt to return to some other state
* such as RUNNING or STOP.
*
* If the new_state starts a new data transfer session then the FD associated
* with that session is returned in data_fd. The user is responsible to close
* this FD when it is finished. The user must consider the migration data stream
* carried over the FD to be opaque and must preserve the byte order of the
* stream. The user is not required to preserve buffer segmentation when writing
* the data stream during the RESUMING operation.
*
* Upon VFIO_DEVICE_FEATURE_GET, get the current migration state of the VFIO
* device, data_fd will be -1.
*/
struct vfio_device_feature_mig_state {
__u32 device_state; /* From enum vfio_device_mig_state */
__s32 data_fd;
};
#define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
/*
* The device migration Finite State Machine is described by the enum
* vfio_device_mig_state. Some of the FSM arcs will create a migration data
* transfer session by returning a FD, in this case the migration data will
* flow over the FD using read() and write() as discussed below.
*
* There are 5 states to support VFIO_MIGRATION_STOP_COPY:
* RUNNING - The device is running normally
* STOP - The device does not change the internal or external state
* STOP_COPY - The device internal state can be read out
* RESUMING - The device is stopped and is loading a new internal state
* ERROR - The device has failed and must be reset
*
* And optional states to support VFIO_MIGRATION_P2P:
* RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
* And VFIO_MIGRATION_PRE_COPY:
* PRE_COPY - The device is running normally but tracking internal state
* changes
* And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY:
* PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA
*
* The FSM takes actions on the arcs between FSM states. The driver implements
* the following behavior for the FSM arcs:
*
* RUNNING_P2P -> STOP
* STOP_COPY -> STOP
* While in STOP the device must stop the operation of the device. The device
* must not generate interrupts, DMA, or any other change to external state.
* It must not change its internal state. When stopped the device and kernel
* migration driver must accept and respond to interaction to support external
* subsystems in the STOP state, for example PCI MSI-X and PCI config space.
* Failure by the user to restrict device access while in STOP must not result
* in error conditions outside the user context (ex. host system faults).
*
* The STOP_COPY arc will terminate a data transfer session.
*
* RESUMING -> STOP
* Leaving RESUMING terminates a data transfer session and indicates the
* device should complete processing of the data delivered by write(). The
* kernel migration driver should complete the incorporation of data written
* to the data transfer FD into the device internal state and perform
* final validity and consistency checking of the new device state. If the
* user provided data is found to be incomplete, inconsistent, or otherwise
* invalid, the migration driver must fail the SET_STATE ioctl and
* optionally go to the ERROR state as described below.
*
* While in STOP the device has the same behavior as other STOP states
* described above.
*
* To abort a RESUMING session the device must be reset.
*
* PRE_COPY -> RUNNING
* RUNNING_P2P -> RUNNING
* While in RUNNING the device is fully operational, the device may generate
* interrupts, DMA, respond to MMIO, all vfio device regions are functional,
* and the device may advance its internal state.
*
* The PRE_COPY arc will terminate a data transfer session.
*
* PRE_COPY_P2P -> RUNNING_P2P
* RUNNING -> RUNNING_P2P
* STOP -> RUNNING_P2P
* While in RUNNING_P2P the device is partially running in the P2P quiescent
* state defined below.
*
* The PRE_COPY_P2P arc will terminate a data transfer session.
*
* RUNNING -> PRE_COPY
* RUNNING_P2P -> PRE_COPY_P2P
* STOP -> STOP_COPY
* PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states
* which share a data transfer session. Moving between these states alters
* what is streamed in session, but does not terminate or otherwise affect
* the associated fd.
*
* These arcs begin the process of saving the device state and will return a
* new data_fd. The migration driver may perform actions such as enabling
* dirty logging of device state when entering PRE_COPY or PER_COPY_P2P.
*
* Each arc does not change the device operation, the device remains
* RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below
* in PRE_COPY_P2P -> STOP_COPY.
*
* PRE_COPY -> PRE_COPY_P2P
* Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above.
* However, while in the PRE_COPY_P2P state, the device is partially running
* in the P2P quiescent state defined below, like RUNNING_P2P.
*
* PRE_COPY_P2P -> PRE_COPY
* This arc allows returning the device to a full RUNNING behavior while
* continuing all the behaviors of PRE_COPY.
*
* PRE_COPY_P2P -> STOP_COPY
* While in the STOP_COPY state the device has the same behavior as STOP
* with the addition that the data transfers session continues to stream the
* migration state. End of stream on the FD indicates the entire device
* state has been transferred.
*
* The user should take steps to restrict access to vfio device regions while
* the device is in STOP_COPY or risk corruption of the device migration data
* stream.
*
* STOP -> RESUMING
* Entering the RESUMING state starts a process of restoring the device state
* and will return a new data_fd. The data stream fed into the data_fd should
* be taken from the data transfer output of a single FD during saving from
* a compatible device. The migration driver may alter/reset the internal
* device state for this arc if required to prepare the device to receive the
* migration data.
*
* STOP_COPY -> PRE_COPY
* STOP_COPY -> PRE_COPY_P2P
* These arcs are not permitted and return error if requested. Future
* revisions of this API may define behaviors for these arcs, in this case
* support will be discoverable by a new flag in
* VFIO_DEVICE_FEATURE_MIGRATION.
*
* any -> ERROR
* ERROR cannot be specified as a device state, however any transition request
* can be failed with an errno return and may then move the device_state into
* ERROR. In this case the device was unable to execute the requested arc and
* was also unable to restore the device to any valid device_state.
* To recover from ERROR VFIO_DEVICE_RESET must be used to return the
* device_state back to RUNNING.
*
* The optional peer to peer (P2P) quiescent state is intended to be a quiescent
* state for the device for the purposes of managing multiple devices within a
* user context where peer-to-peer DMA between devices may be active. The
* RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating
* any new P2P DMA transactions. If the device can identify P2P transactions
* then it can stop only P2P DMA, otherwise it must stop all DMA. The migration
* driver must complete any such outstanding operations prior to completing the
* FSM arc into a P2P state. For the purpose of specification the states
* behave as though the device was fully running if not supported. Like while in
* STOP or STOP_COPY the user must not touch the device, otherwise the state
* can be exited.
*
* The remaining possible transitions are interpreted as combinations of the
* above FSM arcs. As there are multiple paths through the FSM arcs the path
* should be selected based on the following rules:
* - Select the shortest path.
* - The path cannot have saving group states as interior arcs, only
* starting/end states.
* Refer to vfio_mig_get_next_state() for the result of the algorithm.
*
* The automatic transit through the FSM arcs that make up the combination
* transition is invisible to the user. When working with combination arcs the
* user may see any step along the path in the device_state if SET_STATE
* fails. When handling these types of errors users should anticipate future
* revisions of this protocol using new states and those states becoming
* visible in this case.
*
* The optional states cannot be used with SET_STATE if the device does not
* support them. The user can discover if these states are supported by using
* VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can
* avoid knowing about these optional states if the kernel driver supports them.
*
* Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY
* is not present.
*/
enum vfio_device_mig_state {
VFIO_DEVICE_STATE_ERROR = 0,
VFIO_DEVICE_STATE_STOP = 1,
VFIO_DEVICE_STATE_RUNNING = 2,
VFIO_DEVICE_STATE_STOP_COPY = 3,
VFIO_DEVICE_STATE_RESUMING = 4,
VFIO_DEVICE_STATE_RUNNING_P2P = 5,
VFIO_DEVICE_STATE_PRE_COPY = 6,
VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
VFIO_DEVICE_STATE_NR,
};
/**
* VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21)
*
* This ioctl is used on the migration data FD in the precopy phase of the
* migration data transfer. It returns an estimate of the current data sizes
* remaining to be transferred. It allows the user to judge when it is
* appropriate to leave PRE_COPY for STOP_COPY.
*
* This ioctl is valid only in PRE_COPY states and kernel driver should
* return -EINVAL from any other migration state.
*
* The vfio_precopy_info data structure returned by this ioctl provides
* estimates of data available from the device during the PRE_COPY states.
* This estimate is split into two categories, initial_bytes and
* dirty_bytes.
*
* The initial_bytes field indicates the amount of initial precopy
* data available from the device. This field should have a non-zero initial
* value and decrease as migration data is read from the device.
* It is recommended to leave PRE_COPY for STOP_COPY only after this field
* reaches zero. Leaving PRE_COPY earlier might make things slower.
*
* The dirty_bytes field tracks device state changes relative to data
* previously retrieved. This field starts at zero and may increase as
* the internal device state is modified or decrease as that modified
* state is read from the device.
*
* Userspace may use the combination of these fields to estimate the
* potential data size available during the PRE_COPY phases, as well as
* trends relative to the rate the device is dirtying its internal
* state, but these fields are not required to have any bearing relative
* to the data size available during the STOP_COPY phase.
*
* Drivers have a lot of flexibility in when and what they transfer during the
* PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO.
*
* During pre-copy the migration data FD has a temporary "end of stream" that is
* reached when both initial_bytes and dirty_byte are zero. For instance, this
* may indicate that the device is idle and not currently dirtying any internal
* state. When read() is done on this temporary end of stream the kernel driver
* should return ENOMSG from read(). Userspace can wait for more data (which may
* never come) by using poll.
*
* Once in STOP_COPY the migration data FD has a permanent end of stream
* signaled in the usual way by read() always returning 0 and poll always
* returning readable. ENOMSG may not be returned in STOP_COPY.
* Support for this ioctl is mandatory if a driver claims to support
* VFIO_MIGRATION_PRE_COPY.
*
* Return: 0 on success, -1 and errno set on failure.
*/
struct vfio_precopy_info {
__u32 argsz;
__u32 flags;
__aligned_u64 initial_bytes;
__aligned_u64 dirty_bytes;
};
#define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
/*
* Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
* state with the platform-based power management. Device use of lower power
* states depends on factors managed by the runtime power management core,
* including system level support and coordinating support among dependent
* devices. Enabling device low power entry does not guarantee lower power
* usage by the device, nor is a mechanism provided through this feature to
* know the current power state of the device. If any device access happens
* (either from the host or through the vfio uAPI) when the device is in the
* low power state, then the host will move the device out of the low power
* state as necessary prior to the access. Once the access is completed, the
* device may re-enter the low power state. For single shot low power support
* with wake-up notification, see
* VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below. Access to mmap'd
* device regions is disabled on LOW_POWER_ENTRY and may only be resumed after
* calling LOW_POWER_EXIT.
*/
#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3
/*
* This device feature has the same behavior as
* VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user
* provides an eventfd for wake-up notification. When the device moves out of
* the low power state for the wake-up, the host will not allow the device to
* re-enter a low power state without a subsequent user call to one of the low
* power entry device feature IOCTLs. Access to mmap'd device regions is
* disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the
* low power exit. The low power exit can happen either through LOW_POWER_EXIT
* or through any other access (where the wake-up notification has been
* generated). The access to mmap'd device regions will not trigger low power
* exit.
*
* The notification through the provided eventfd will be generated only when
* the device has entered and is resumed from a low power state after
* calling this device feature IOCTL. A device that has not entered low power
* state, as managed through the runtime power management core, will not
* generate a notification through the provided eventfd on access. Calling the
* LOW_POWER_EXIT feature is optional in the case where notification has been
* signaled on the provided eventfd that a resume from low power has occurred.
*/
struct vfio_device_low_power_entry_with_wakeup {
__s32 wakeup_eventfd;
__u32 reserved;
};
#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4
/*
* Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as
* previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or
* VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features.
* This device feature IOCTL may itself generate a wakeup eventfd notification
* in the latter case if the device had previously entered a low power state.
*/
#define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5
/*
* Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging.
* VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports
* DMA logging.
*
* DMA logging allows a device to internally record what DMAs the device is
* initiating and report them back to userspace. It is part of the VFIO
* migration infrastructure that allows implementing dirty page tracking
* during the pre copy phase of live migration. Only DMA WRITEs are logged,
* and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
*
* When DMA logging is started a range of IOVAs to monitor is provided and the
* device can optimize its logging to cover only the IOVA range given. Each
* DMA that the device initiates inside the range will be logged by the device
* for later retrieval.
*
* page_size is an input that hints what tracking granularity the device
* should try to achieve. If the device cannot do the hinted page size then
* it's the driver choice which page size to pick based on its support.
* On output the device will return the page size it selected.
*
* ranges is a pointer to an array of
* struct vfio_device_feature_dma_logging_range.
*
* The core kernel code guarantees to support by minimum num_ranges that fit
* into a single kernel page. User space can try higher values but should give
* up if the above can't be achieved as of some driver limitations.
*
* A single call to start device DMA logging can be issued and a matching stop
* should follow at the end. Another start is not allowed in the meantime.
*/
struct vfio_device_feature_dma_logging_control {
__aligned_u64 page_size;
__u32 num_ranges;
__u32 __reserved;
__aligned_u64 ranges;
};
struct vfio_device_feature_dma_logging_range {
__aligned_u64 iova;
__aligned_u64 length;
};
#define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6
/*
* Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started
* by VFIO_DEVICE_FEATURE_DMA_LOGGING_START
*/
#define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7
/*
* Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log
*
* Query the device's DMA log for written pages within the given IOVA range.
* During querying the log is cleared for the IOVA range.
*
* bitmap is a pointer to an array of u64s that will hold the output bitmap
* with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits
* is given by:
* bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64))
*
* The input page_size can be any power of two value and does not have to
* match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver
* will format its internal logging to match the reporting page size, possibly
* by replicating bits if the internal page size is lower than requested.
*
* The LOGGING_REPORT will only set bits in the bitmap and never clear or
* perform any initialization of the user provided bitmap.
*
* If any error is returned userspace should assume that the dirty log is
* corrupted. Error recovery is to consider all memory dirty and try to
* restart the dirty tracking, or to abort/restart the whole migration.
*
* If DMA logging is not enabled, an error will be returned.
*
*/
struct vfio_device_feature_dma_logging_report {
__aligned_u64 iova;
__aligned_u64 length;
__aligned_u64 page_size;
__aligned_u64 bitmap;
};
#define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8
/*
* Upon VFIO_DEVICE_FEATURE_GET read back the estimated data length that will
* be required to complete stop copy.
*
* Note: Can be called on each device state.
*/
struct vfio_device_feature_mig_data_size {
__aligned_u64 stop_copy_length;
};
#define VFIO_DEVICE_FEATURE_MIG_DATA_SIZE 9
/**
* Upon VFIO_DEVICE_FEATURE_SET, set or clear the BUS mastering for the device
* based on the operation specified in op flag.
*
* The functionality is incorporated for devices that needs bus master control,
* but the in-band device interface lacks the support. Consequently, it is not
* applicable to PCI devices, as bus master control for PCI devices is managed
* in-band through the configuration space. At present, this feature is supported
* only for CDX devices.
* When the device's BUS MASTER setting is configured as CLEAR, it will result in
* blocking all incoming DMA requests from the device. On the other hand, configuring
* the device's BUS MASTER setting as SET (enable) will grant the device the
* capability to perform DMA to the host memory.
*/
struct vfio_device_feature_bus_master {
__u32 op;
#define VFIO_DEVICE_FEATURE_CLEAR_MASTER 0 /* Clear Bus Master */
#define VFIO_DEVICE_FEATURE_SET_MASTER 1 /* Set Bus Master */
};
#define VFIO_DEVICE_FEATURE_BUS_MASTER 10
/* -------- API for Type1 VFIO IOMMU -------- */
/**
* VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
*
* Retrieve information about the IOMMU object. Fills in provided
* struct vfio_iommu_info. Caller sets argsz.
*
* XXX Should we do these by CHECK_EXTENSION too?
*/
struct vfio_iommu_type1_info {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
#define VFIO_IOMMU_INFO_CAPS (1 << 1) /* Info supports caps */
__aligned_u64 iova_pgsizes; /* Bitmap of supported page sizes */
__u32 cap_offset; /* Offset within info struct of first cap */
__u32 pad;
};
/*
* The IOVA capability allows to report the valid IOVA range(s)
* excluding any non-relaxable reserved regions exposed by
* devices attached to the container. Any DMA map attempt
* outside the valid iova range will return error.
*
* The structures below define version 1 of this capability.
*/
#define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1
struct vfio_iova_range {
__u64 start;
__u64 end;
};
struct vfio_iommu_type1_info_cap_iova_range {
struct vfio_info_cap_header header;
__u32 nr_iovas;
__u32 reserved;
struct vfio_iova_range iova_ranges[];
};
/*
* The migration capability allows to report supported features for migration.
*
* The structures below define version 1 of this capability.
*
* The existence of this capability indicates that IOMMU kernel driver supports
* dirty page logging.
*
* pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
* page logging.
* max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
* size in bytes that can be used by user applications when getting the dirty
* bitmap.
*/
#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 2
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header;
__u32 flags;
__u64 pgsize_bitmap;
__u64 max_dirty_bitmap_size; /* in bytes */
};
/*
* The DMA available capability allows to report the current number of
* simultaneously outstanding DMA mappings that are allowed.
*
* The structure below defines version 1 of this capability.
*
* avail: specifies the current number of outstanding DMA mappings allowed.
*/
#define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3
struct vfio_iommu_type1_info_dma_avail {
struct vfio_info_cap_header header;
__u32 avail;
};
#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/**
* VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
*
* Map process virtual addresses to IO virtual addresses using the
* provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
*
* If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr
* must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR. To
* maintain memory consistency within the user application, the updated vaddr
* must address the same memory object as originally mapped. Failure to do so
* will result in user memory corruption and/or device misbehavior. iova and
* size must match those in the original MAP_DMA call. Protection is not
* changed, and the READ & WRITE flags must be 0.
*/
struct vfio_iommu_type1_dma_map {
__u32 argsz;
__u32 flags;
#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
#define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
__u64 vaddr; /* Process virtual address */
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
};
#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
struct vfio_bitmap {
__u64 pgsize; /* page size for bitmap in bytes */
__u64 size; /* in bytes */
__u64 *data; /* one bit per page */
};
/**
* VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
* struct vfio_dma_unmap)
*
* Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
* Caller sets argsz. The actual unmapped size is returned in the size
* field. No guarantee is made to the user that arbitrary unmaps of iova
* or size different from those used in the original mapping call will
* succeed.
*
* VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
* before unmapping IO virtual addresses. When this flag is set, the user must
* provide a struct vfio_bitmap in data[]. User must provide zero-allocated
* memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
* A bit in the bitmap represents one page, of user provided page size in
* vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
* indicates that the page at that offset from iova is dirty. A Bitmap of the
* pages in the range of unmapped size is returned in the user-provided
* vfio_bitmap.data.
*
* If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses. iova and size
* must be 0. This cannot be combined with the get-dirty-bitmap flag.
*
* If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
* virtual addresses in the iova range. DMA to already-mapped pages continues.
* Groups may not be added to the container while any addresses are invalid.
* This cannot be combined with the get-dirty-bitmap flag.
*/
struct vfio_iommu_type1_dma_unmap {
__u32 argsz;
__u32 flags;
#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
#define VFIO_DMA_UNMAP_FLAG_ALL (1 << 1)
#define VFIO_DMA_UNMAP_FLAG_VADDR (1 << 2)
__u64 iova; /* IO virtual address */
__u64 size; /* Size of mapping (bytes) */
__u8 data[];
};
#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
/*
* IOCTLs to enable/disable IOMMU container usage.
* No parameters are supported.
*/
#define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15)
#define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16)
/**
* VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
* struct vfio_iommu_type1_dirty_bitmap)
* IOCTL is used for dirty pages logging.
* Caller should set flag depending on which operation to perform, details as
* below:
*
* Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
* the IOMMU driver to log pages that are dirtied or potentially dirtied by
* the device; designed to be used when a migration is in progress. Dirty pages
* are logged until logging is disabled by user application by calling the IOCTL
* with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
*
* Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
* the IOMMU driver to stop logging dirtied pages.
*
* Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
* returns the dirty pages bitmap for IOMMU container for a given IOVA range.
* The user must specify the IOVA range and the pgsize through the structure
* vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
* supports getting a bitmap of the smallest supported pgsize only and can be
* modified in future to get a bitmap of any specified supported pgsize. The
* user must provide a zeroed memory area for the bitmap memory and specify its
* size in bitmap.size. One bit is used to represent one page consecutively
* starting from iova offset. The user should provide page size in bitmap.pgsize
* field. A bit set in the bitmap indicates that the page at that offset from
* iova is dirty. The caller must set argsz to a value including the size of
* structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
* actual bitmap. If dirty pages logging is not enabled, an error will be
* returned.
*
* Only one of the flags _START, _STOP and _GET may be specified at a time.
*
*/
struct vfio_iommu_type1_dirty_bitmap {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START (1 << 0)
#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP (1 << 1)
#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP (1 << 2)
__u8 data[];
};
struct vfio_iommu_type1_dirty_bitmap_get {
__u64 iova; /* IO virtual address */
__u64 size; /* Size of iova range */
struct vfio_bitmap bitmap;
};
#define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17)
/* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
/*
* The SPAPR TCE DDW info struct provides the information about
* the details of Dynamic DMA window capability.
*
* @pgsizes contains a page size bitmask, 4K/64K/16M are supported.
* @max_dynamic_windows_supported tells the maximum number of windows
* which the platform can create.
* @levels tells the maximum number of levels in multi-level IOMMU tables;
* this allows splitting a table into smaller chunks which reduces
* the amount of physically contiguous memory required for the table.
*/
struct vfio_iommu_spapr_tce_ddw_info {
__u64 pgsizes; /* Bitmap of supported page sizes */
__u32 max_dynamic_windows_supported;
__u32 levels;
};
/*
* The SPAPR TCE info struct provides the information about the PCI bus
* address ranges available for DMA, these values are programmed into
* the hardware so the guest has to know that information.
*
* The DMA 32 bit window start is an absolute PCI bus address.
* The IOVA address passed via map/unmap ioctls are absolute PCI bus
* addresses too so the window works as a filter rather than an offset
* for IOVA addresses.
*
* Flags supported:
* - VFIO_IOMMU_SPAPR_INFO_DDW: informs the userspace that dynamic DMA windows
* (DDW) support is present. @ddw is only supported when DDW is present.
*/
struct vfio_iommu_spapr_tce_info {
__u32 argsz;
__u32 flags;
#define VFIO_IOMMU_SPAPR_INFO_DDW (1 << 0) /* DDW supported */
__u32 dma32_window_start; /* 32 bit window start (bytes) */
__u32 dma32_window_size; /* 32 bit window size (bytes) */
struct vfio_iommu_spapr_tce_ddw_info ddw;
};
#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
/*
* EEH PE operation struct provides ways to:
* - enable/disable EEH functionality;
* - unfreeze IO/DMA for frozen PE;
* - read PE state;
* - reset PE;
* - configure PE;
* - inject EEH error.
*/
struct vfio_eeh_pe_err {
__u32 type;
__u32 func;
__u64 addr;
__u64 mask;
};
struct vfio_eeh_pe_op {
__u32 argsz;
__u32 flags;
__u32 op;
union {
struct vfio_eeh_pe_err err;
};
};
#define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
#define VFIO_EEH_PE_ENABLE 1 /* Enable EEH functionality */
#define VFIO_EEH_PE_UNFREEZE_IO 2 /* Enable IO for frozen PE */
#define VFIO_EEH_PE_UNFREEZE_DMA 3 /* Enable DMA for frozen PE */
#define VFIO_EEH_PE_GET_STATE 4 /* PE state retrieval */
#define VFIO_EEH_PE_STATE_NORMAL 0 /* PE in functional state */
#define VFIO_EEH_PE_STATE_RESET 1 /* PE reset in progress */
#define VFIO_EEH_PE_STATE_STOPPED 2 /* Stopped DMA and IO */
#define VFIO_EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */
#define VFIO_EEH_PE_STATE_UNAVAIL 5 /* State unavailable */
#define VFIO_EEH_PE_RESET_DEACTIVATE 5 /* Deassert PE reset */
#define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */
#define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */
#define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */
#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */
#define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
/**
* VFIO_IOMMU_SPAPR_REGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 17, struct vfio_iommu_spapr_register_memory)
*
* Registers user space memory where DMA is allowed. It pins
* user pages and does the locked memory accounting so
* subsequent VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA calls
* get faster.
*/
struct vfio_iommu_spapr_register_memory {
__u32 argsz;
__u32 flags;
__u64 vaddr; /* Process virtual address */
__u64 size; /* Size of mapping (bytes) */
};
#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
/**
* VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY - _IOW(VFIO_TYPE, VFIO_BASE + 18, struct vfio_iommu_spapr_register_memory)
*
* Unregisters user space memory registered with
* VFIO_IOMMU_SPAPR_REGISTER_MEMORY.
* Uses vfio_iommu_spapr_register_memory for parameters.
*/
#define VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 18)
/**
* VFIO_IOMMU_SPAPR_TCE_CREATE - _IOWR(VFIO_TYPE, VFIO_BASE + 19, struct vfio_iommu_spapr_tce_create)
*
* Creates an additional TCE table and programs it (sets a new DMA window)
* to every IOMMU group in the container. It receives page shift, window
* size and number of levels in the TCE table being created.
*
* It allocates and returns an offset on a PCI bus of the new DMA window.
*/
struct vfio_iommu_spapr_tce_create {
__u32 argsz;
__u32 flags;
/* in */
__u32 page_shift;
__u32 __resv1;
__u64 window_size;
__u32 levels;
__u32 __resv2;
/* out */
__u64 start_addr;
};
#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
/**
* VFIO_IOMMU_SPAPR_TCE_REMOVE - _IOW(VFIO_TYPE, VFIO_BASE + 20, struct vfio_iommu_spapr_tce_remove)
*
* Unprograms a TCE table from all groups in the container and destroys it.
* It receives a PCI bus offset as a window id.
*/
struct vfio_iommu_spapr_tce_remove {
__u32 argsz;
__u32 flags;
/* in */
__u64 start_addr;
};
#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
/* ***************************************************************** */
#endif /* VFIO_H */
Zerion Mini Shell 1.0