Mini Shell
| Direktori : /usr/include/scsi/ |
|
|
| Current File : //usr/include/scsi/scsi_bsg_fc.h |
/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
* FC Transport BSG Interface
*
* Copyright (C) 2008 James Smart, Emulex Corporation
*/
#ifndef SCSI_BSG_FC_H
#define SCSI_BSG_FC_H
#include <linux/types.h>
/*
* This file intended to be included by both kernel and user space
*/
/*
* FC Transport SGIO v4 BSG Message Support
*/
/* Default BSG request timeout (in seconds) */
#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ)
/*
* Request Message Codes supported by the FC Transport
*/
/* define the class masks for the message codes */
#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */
#define FC_BSG_HST_MASK 0x80000000 /* fc host class */
#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */
/* fc_host Message Codes */
#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001)
#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002)
#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003)
#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004)
#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF)
/* fc_rport Message Codes */
#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001)
#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002)
/*
* FC Address Identifiers in Message Structures :
*
* Whenever a command payload contains a FC Address Identifier
* (aka port_id), the value is effectively in big-endian
* order, thus the array elements are decoded as follows:
* element [0] is bits 23:16 of the FC Address Identifier
* element [1] is bits 15:8 of the FC Address Identifier
* element [2] is bits 7:0 of the FC Address Identifier
*/
/*
* FC Host Messages
*/
/* FC_BSG_HST_ADDR_PORT : */
/* Request:
* This message requests the FC host to login to the remote port
* at the specified N_Port_Id. The remote port is to be enumerated
* with the transport upon completion of the login.
*/
struct fc_bsg_host_add_rport {
__u8 reserved;
/* FC Address Identier of the remote port to login to */
__u8 port_id[3];
};
/* Response:
* There is no additional response data - fc_bsg_reply->result is sufficient
*/
/* FC_BSG_HST_DEL_RPORT : */
/* Request:
* This message requests the FC host to remove an enumerated
* remote port and to terminate the login to it.
*
* Note: The driver is free to reject this request if it desires to
* remain logged in with the remote port.
*/
struct fc_bsg_host_del_rport {
__u8 reserved;
/* FC Address Identier of the remote port to logout of */
__u8 port_id[3];
};
/* Response:
* There is no additional response data - fc_bsg_reply->result is sufficient
*/
/* FC_BSG_HST_ELS_NOLOGIN : */
/* Request:
* This message requests the FC_Host to send an ELS to a specific
* N_Port_ID. The host does not need to log into the remote port,
* nor does it need to enumerate the rport for further traffic
* (although, the FC host is free to do so if it desires).
*/
struct fc_bsg_host_els {
/*
* ELS Command Code being sent (must be the same as byte 0
* of the payload)
*/
__u8 command_code;
/* FC Address Identier of the remote port to send the ELS to */
__u8 port_id[3];
};
/* Response:
*/
/* fc_bsg_ctels_reply->status values */
#define FC_CTELS_STATUS_OK 0x00000000
#define FC_CTELS_STATUS_REJECT 0x00000001
#define FC_CTELS_STATUS_P_RJT 0x00000002
#define FC_CTELS_STATUS_F_RJT 0x00000003
#define FC_CTELS_STATUS_P_BSY 0x00000004
#define FC_CTELS_STATUS_F_BSY 0x00000006
struct fc_bsg_ctels_reply {
/*
* Note: An ELS LS_RJT may be reported in 2 ways:
* a) A status of FC_CTELS_STATUS_OK is returned. The caller
* is to look into the ELS receive payload to determine
* LS_ACC or LS_RJT (by contents of word 0). The reject
* data will be in word 1.
* b) A status of FC_CTELS_STATUS_REJECT is returned, The
* rjt_data field will contain valid data.
*
* Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
* the receive payload word 0 indicates LS_ACC
* (e.g. value is 0x02xxxxxx).
*
* Note: Similarly, a CT Reject may be reported in 2 ways:
* a) A status of FC_CTELS_STATUS_OK is returned. The caller
* is to look into the CT receive payload to determine
* Accept or Reject (by contents of word 2). The reject
* data will be in word 3.
* b) A status of FC_CTELS_STATUS_REJECT is returned, The
* rjt_data field will contain valid data.
*
* Note: x_RJT/BSY status will indicae that the rjt_data field
* is valid and contains the reason/explanation values.
*/
__u32 status; /* See FC_CTELS_STATUS_xxx */
/* valid if status is not FC_CTELS_STATUS_OK */
struct {
__u8 action; /* fragment_id for CT REJECT */
__u8 reason_code;
__u8 reason_explanation;
__u8 vendor_unique;
} rjt_data;
};
/* FC_BSG_HST_CT : */
/* Request:
* This message requests that a CT Request be performed with the
* indicated N_Port_ID. The driver is responsible for logging in with
* the fabric and/or N_Port_ID, etc as per FC rules. This request does
* not mandate that the driver must enumerate the destination in the
* transport. The driver is allowed to decide whether to enumerate it,
* and whether to tear it down after the request.
*/
struct fc_bsg_host_ct {
__u8 reserved;
/* FC Address Identier of the remote port to send the ELS to */
__u8 port_id[3];
/*
* We need words 0-2 of the generic preamble for the LLD's
*/
__u32 preamble_word0; /* revision & IN_ID */
__u32 preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
__u32 preamble_word2; /* Cmd Code, Max Size */
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* FC_BSG_HST_VENDOR : */
/* Request:
* Note: When specifying vendor_id, be sure to read the Vendor Type and ID
* formatting requirements specified in scsi_netlink.h
*/
struct fc_bsg_host_vendor {
/*
* Identifies the vendor that the message is formatted for. This
* should be the recipient of the message.
*/
__u64 vendor_id;
/* start of vendor command area */
__u32 vendor_cmd[0];
};
/* Response:
*/
struct fc_bsg_host_vendor_reply {
/* start of vendor response area */
__u32 vendor_rsp[0];
};
/*
* FC Remote Port Messages
*/
/* FC_BSG_RPT_ELS : */
/* Request:
* This message requests that an ELS be performed with the rport.
*/
struct fc_bsg_rport_els {
/*
* ELS Command Code being sent (must be the same as
* byte 0 of the payload)
*/
__u8 els_code;
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* FC_BSG_RPT_CT : */
/* Request:
* This message requests that a CT Request be performed with the rport.
*/
struct fc_bsg_rport_ct {
/*
* We need words 0-2 of the generic preamble for the LLD's
*/
__u32 preamble_word0; /* revision & IN_ID */
__u32 preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
__u32 preamble_word2; /* Cmd Code, Max Size */
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* request (CDB) structure of the sg_io_v4 */
struct fc_bsg_request {
__u32 msgcode;
union {
struct fc_bsg_host_add_rport h_addrport;
struct fc_bsg_host_del_rport h_delrport;
struct fc_bsg_host_els h_els;
struct fc_bsg_host_ct h_ct;
struct fc_bsg_host_vendor h_vendor;
struct fc_bsg_rport_els r_els;
struct fc_bsg_rport_ct r_ct;
} rqst_data;
} __attribute__((packed));
/* response (request sense data) structure of the sg_io_v4 */
struct fc_bsg_reply {
/*
* The completion result. Result exists in two forms:
* if negative, it is an -Exxx system errno value. There will
* be no further reply information supplied.
* else, it's the 4-byte scsi error result, with driver, host,
* msg and status fields. The per-msgcode reply structure
* will contain valid data.
*/
__u32 result;
/* If there was reply_payload, how much was recevied ? */
__u32 reply_payload_rcv_len;
union {
struct fc_bsg_host_vendor_reply vendor_reply;
struct fc_bsg_ctels_reply ctels_reply;
} reply_data;
};
#endif /* SCSI_BSG_FC_H */
Zerion Mini Shell 1.0