Mini Shell
The changelog after March 2005 can be obtained from the git repository
at <git://git.kernel.org/pub/scm/network/ethtool/ethtool.git>.
The changelog after version 2 up to March 2005 can be obtained from the
BitKeeper repository at <bk://gkernel.bkbits.net/ethtool>.
Tue Aug 17 2004 Jeff Garzik <jgarzik@pobox.com>
* NEWS, configure.ac: Release version 2
Fri Jul 2 2004 Jeff Garzik <jgarzik@pobox.com>
Merged
* fec_8xx.c, ethtool-util.h, Makefile.am: Add fec_8xx register dump.
Contributed by Pantelis Antoniou <panto@intracom.gr>
* Update ethtool.c to iterate through a list of drivers
* Fixed fec_8xx.c warnings on 64-bit
Fri Jul 2 2004 Jim Lewis <jim@jklewis.com>
* pcnet32.c, ethtool-util.h, Makefile.am: Add pcnet32 register dump.
Fri Apr 9 2004 Jason Lunz <lunz@reflexsecurity.com>
* ethtool.c: Remove incorrect restriction on ethernet interface
names.
Fri Apr 9 2004 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
* ethtool.c: This fixes the bogus tail backslash that I did.
Fri Apr 9 2004 Jim Lewis <jim@jklewis.com>
* ethtool.c: Return results of self-test back to OS,
via exit(2).
Fri Apr 9 2004 Jeb Cramer <cramerj@intel.com>
* e1000.c: Update device id list and add printout of phy type in
register dump. Set default mac_type to 82543 since register offsets
haven't changed.
Fri Apr 9 2004 Jeff Garzik <jgarzik@pobox.com>
* configure.ac, Makefile.am, ethtool.c, etc.:
convert to more recent autoconf.
Sat Aug 30 2003 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
* ethtool.8, ethtool.c: ethtool register dump raw mode
Sat Jul 19 2003 Scott Feldman <scott.feldman@intel.com>
* ethtool.8, ethtool.c, ethtool-copy.h:
Add support for TSO get/set. Corresponds to NETIF_F_TSO.
Extended -k|K option to included tso, and changed meaning from
just "checksum/sg" to more general "offload". Now covers Rx/Tx
csum, SG, and TSO.
Thu May 28 2003 Ganesh Venkatesan <ganesh.venkatesan@intel.com>
* ethtool-copy.h: new definitions for 10GbE
Thu May 28 2003 Scott Feldman <scott.feldman@intel.com>
* ethtool.c: Add ethtool -E to write EEPROM byte.
* e100.c: Added MDI/MDI-X status to register dump.
Thu May 28 2003 Reeja John <reeja.john@amd.com>
* amd8111e.c: new file, support for AMD-8111e NICs
* ethtool.c: properly set ecmd.advertising
Sat Mar 29 2003 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
* realtek.c: clean up chip enumeration, support additional chips
Fri Mar 28 2003 Jeb Cramer <cramerj@intel.com>
* e1000.c: Update supported devices (82541 & 82547). Add bus type,
speed and width to register dump printout.
* ethtool.c (show_usage): Add -S to printout of supported commands.
Tue Jan 22 2003 Jeff Garzik <jgarzik@pobox.com>
* natsemi.c (PRINT_INTR, __print_intr): Decompose PRINT_INTR
macro into macro abuse and function call portions. Move the
actual function body to new static functoin __print_intr.
This eliminates the annoying build warning :)
Thu Jan 16 2003 Jeb Cramer <jeb.j.cramer@intel.com>
* ethtool.c (do_regs, dump_eeprom): Fix memory leaks on failed
operations. Add error handling of dump_regs(). Modify printout of
eeprom dump to accomodate larger eeproms.
* e1000.c: Update supported devices. Add error conditions for
unsupported devices.
Mon Oct 21 2002 Ben Collins <bcollins@debian.org>
* ethtool.c: Add new parameters to -e, for raw EEPROM output, and
offset and length options.
* natsemi.c (natsemi_dump_eeprom): Show correct offset using new
offset feature above.
* tg3.c: New file, implements tg3_dump_eeprom.
* Makefile.am: Add it to the build sources.
* ethtool-util.h: Prototype tg3_dump_eeprom.
* ethtool.8: Document new -e options.
Thu Oct 17 2002 Tim Hockin <thockin@sun.com>
* ethtool.c: make calls to strtol() use base 0
Wed Sep 18 2002 Scott Feldman <scott.feldman@intel.com>
* ethtool.c (dump_regs): call e100_dump_regs if e100
* e100.c: new file
* ethtool-util.h: prototype e100_dump_regs
Thu Jun 20 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.8: document new -S stats dump argument
* configure.in, NEWS: release version 1.6
Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* realtek.c (realtek_dump_regs): dump legacy 8139 registers
* ethtool.c (do_gstats, doit, parse_cmdline):
support dumping of NIC-specific statistics
Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* realtek.c (realtek_dump_regs): dump RTL8139C+ registers
Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* realtek.c: new file, dumps RealTek RTL8169 PCI NIC's registers
* Makefile.am, ethtool.c, ethtool-util.h: use it
Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* NEWS: list new commands added recently
* ethtool.c (do_gcoalesce, do_scoalesce, dump_coalesce): new
(parse_cmdline, doit): handle get/set coalesce parameters (-c,-C)
(do_[gs]*): convert to use table-driven cmd line parsing
* ethtool.8: document -c and -C
Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.c (do_gring, do_sring, dump_ring,
parse_ring_cmdline): new functions
(parse_cmdline, doit): handle get/set ring parameters (-g,-G)
(do_spause): fix off-by-one bugs
* ethtool.8: document -g and -G
Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.c (do_gpause, do_spause, dump_pause,
parse_pause_cmdline): new functions
(parse_cmdline, doit): handle get/set pause parameters (-a,-A)
* ethtool.8: document -a, -A, -e, and -p
Wed May 22 2002 Chris Leech <christopher.leech@intel.com>
Scott Feldman <scott.feldman@intel.com>
* ethtool-copy.h: add support for ETHTOOL_PHYS_ID function.
* ethtool.c: add support for ETHTOOL_PHYS_ID function, add
support for e1000 reg dump.
* Makefile.am: add e1000.c
* e1000.c: reg dump support for Intel(R) PRO/1000 adapters.
* ethtool-util.h: add e1000 reg dump support.
Sat May 11 2002 Eli Kupermann <eli.kupermann@intel.com>
* ethtool.c (do_test): add support for online/offline test modes
Elsewhere: document "-t" arg usage, and handle usage
Sat May 11 2002 Jes Sorensen <jes@wildopensource.com>
* ethtool.c (dump_ecmd): If unknown value is
encountered in speed, duplex, or port ETHTOOL_GSET
return data, print the numeric value returned.
Wed May 1 2002 Eli Kupermann <eli.kupermann@intel.com>
* ethtool.8: document new -t test option
Wed May 1 2002 Christoph Hellwig <hch@lst.de>
* Makefile.am (dist-hook): Use $(top-srcdir) for refering to sources.
Mon Apr 29 2002 Christoph Hellwig <hch@lst.de>
* Makefile.am (SUBDIRS): Remove.
(RPMSRCS): Likewise.
(TMPDIR): Likewise.
(rpm): Likewise.
(EXTRA_DIST): Add ethtool.spec.in.
(dist-hook): New rule. Create rpm specfile.
* configure.in (AC_OUTPUT): Add ethtool.spec.
* ethtool.spec.in: New file. Rpm specfile template.
* redhat/ethtool.spec.in: Removed.
* redhat/Makefile.am: Removed.
Wed Mar 20 2002 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool-copy.h: Merge coalescing param, ring
param, and pause param ioctl structs from kernel 2.5.7.
Merge ethtool_test changes fromkernel 2.5.7.
* ethtool: Update for ethtool_test cleanups.
Wed Mar 20 2002 Eli Kupermann <eli.kupermann@intel.com>
* ethtool.c: (do_test): new function
Elsewhere: add support for 'perform test' function,
via a new "-t" arg, by calling do_test.
Sun Mar 3 2002 Brad Hards <bhards@bigpond.net.au>
* ethtool.c (parse_cmdline): Support "usb"
as well as "eth" network interfaces. USB networking
uses a different prefix.
Fri Feb 8 2002 "Noam, Amir" <amir.noam@intel.com>,
"Kupermann, Eli" <eli.kupermann@intel.com>
* ethtool.c (dump_advertised): new function.
(dump_ecmd): Call it.
Elsewhere: reformat code.
Wed Nov 28 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* configure.in, Makefile.am, redhat/Makefile.am:
make sure redhat spec is included in dist tarball.
Tue Nov 27 2001 Tim Hockin <thockin@sun.com>
* natsemi.c: strings changes
* ethtool.c: print messagelevel as hex (netif_msg_* shows better :)
Sun Nov 18 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* NEWS: update with recent changes
* ethtool.8: phy address can be used if implemented in the
driver, so remove "Not used yet" remark.
Sun Nov 18 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* Makefile.am, de2104x.c, ethtool-util.h, ethtool.c:
Support register dumps for de2104x driver.
Tue Nov 13 2001 Tim Hockin <thockin@sun.com>
* natsemi.c, ethtool.c: use u8 data for ethtool_regs
* ethtool-copy.h: latest from kernel
* natsemi.c, ethtool.c: support ETHTOOL_GEEPROM via -e param
Mon Nov 12 2001 Tim Hockin <thockin@sun.com>
* natsemi.c: check version, conditionally print RFCR-indexed data
Wed Nov 07 2001 Tim Hockin <thockin@sun.com>
* ethtool.c: print less errors for unsupported ioctl()s
* ethtool.c: warn if all ioctl()s are unsupported or failed
* ethtool.c: change autoneg-restart mechanism to -r (as per jgarzik)
* ethtool.c: check for "eth" in devicename (per jg)
* ethtool.c: remove 'extraneous' braces
Wed Nov 07 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.c, ethtool.8: support bnc port/media
Tue Nov 06 2001 Tim Hockin <thockin@sun.com>
* ethtool.c: clean up output for unhandled register dumps
* natsemi.c: finish pretty-printing register dumps
* ethtool.8: document -d option
* various: add copyright info, where applicable
* ethtool.c: be nicer about unsupported ioctl()s where possible
and be more verbose where nice is not an option.
Mon Nov 05 2001 Tim Hockin <thockin@sun.com>
* natsemi.c: first cut at 'pretty-printing' register dumps
Fri Nov 02 2001 Tim Hockin <thockin@sun.com>
* ethtool.c: add support for ETHTOOL_GREGS via -d (dump) flag
* ethtool.c: add support for device-specific dumps for known devices
* ethtool.c: make mode-specific handling allocate ifr_data
* Makefile.am: import ChangeLog to rpm specfile
* natsemi.c: added
* ethtool-util.h: added
Thu Nov 01 2001 Tim Hockin <thockin@sun.com>
* ethtool.c: add support for ETHTOOL_GLINK in output
* ethtool.c: add support for ETHTOOL_NWAY_RST via 'autoneg restart'
* ethtool.c: add support for ETHTOOL_[GS]MSGLVL via 'msglvl' param
* ethtool.8: add documentation for above
* ethtool-copy.h: updated to sync with kernel
Fri Oct 26 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.8: Update contributors list, home page URL.
* ethtool.8: Much cleanup, no content change.
Contributed by Andre Majorel.
* ethtool.c: Clean up '-h' usage message.
Contributed by Andre Majorel.
Fri Oct 26 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* Configure.in: bump version to 1.4cvs
* Makefile.am: include ethtool-copy.h in list of sources
* ethtool-copy.h:
Import ethtool.h from kernel 2.4.13.
* ethtool.c:
Define SIOCETHTOOL if it is missing,
trim trailing whitespace.
* NEWS: update for these changes
Wed Sep 19 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* ethtool.c, ethtool-copy.h:
Import copy of kernel 2.4.10-pre12's ethtool.h.
Wed Sep 19 2001 Tim Hockin <thockin@sun.com>
* Makefile.am, redhat/ethtool.spec.in:
Basic "make rpm" support.
Wed Sep 19 2001 Tim Hockin <thockin@sun.com>
* AUTHORS, NEWS, ethtool.8, ethtool.c:
Wake-on-LAN support.
Thu May 17 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* configure.in, NEWS, README: Version 1.2 release
* ethtool.c: Support ETHTOOL_GDRVINFO.
* ethtool.8: Document it.
Fri Mar 20 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
* Makefile.am, configure.in, autogen.sh, NEWS,
ChangeLog, AUTHORS, README:
Add autoconf/automake support.
Zerion Mini Shell 1.0