Mini Shell
1.999818 2019-10-20
* Fix CPAN RT #130736 regarding numify() on a Math::BigFloat with a large
number of digits and an equally large, but negative, exponent.
* Fix a problem in to_ieee754() due to rounding in bpow().
1.999817 2019-10-11
* Avoid non-integers in intermediate computations in Math::BigInt::Calc. This
causes errors due to rounding issues, e.g., 47265625999999999 / 1000000000
is 47265626 with double precision.
* Remove api_version() and the corresponding test file. There is no need to
check which methods are supported by a backend library now that each backend
library is a subclass of Math::BigInt::Lib. Methods not provided in the
backend library are provided by the parent class.
* Add to_ieee745() and from_ieee754().
* Add backermann() and ackermann() for the Ackermann function.
* Add buparrow() and uparrow() for Knuth's up-arrow notation.
* Add information about the github repository.
* Update links in SUPPORT section in POD.
* Fix bpow(). It returned NaN when it should truncate to zero.
* Make blsft() in Math::BigInt allow bases up until the largest unsigned
integer.
* Make _lsft() in Math::BigInt::Calc handle an arbitrarily large base.
* Add new methods bdigitsum() and digitsum() to Math::BigInt. Add new method
_digitsum() to Math::BigInt::Lib.
* Add new methods is_non_negative() and is_non_positive().
* Extend the default collation sequence used by to_base() and from_base() to
all the 94 printable ASCII characters except blank/space.
* Make new() in Math::BigFloat handle octal floating point numbers.
* Slightly more robust t/01load.t.
* Remove unused variables.
* Miscellaneous code cleanup.
1.999816 2018-10-26
* bnok() for Math::BigInt and Math::BigFloat now support the full Kronenburg
extension. The behaviour is identical to the behaviour of the Maple and
Mathematica function for negative integers n, k. Add tests. This closes CPAN
RT #95628.
* Fix POD errors. This closes CPAN RT #125141.
1.999815 2018-10-19
* Move bitwise operators signed and, signed or, and signed xor from
lib/Math/BigInt/CalcEmu.pm into lib/Math/BigInt/Lib.pm. The file
lib/Math/BigInt/CalcEmu.pm is no longer needed and thus removed.
1.999814 2018-10-01
* Add to_base() and from_base() to Math::BigInt and corresponding library
methods _to_base() and _from_base() to Math::BigInt::Lib. This was inspired
by CPAN RT #122681.
* Fix Makefile.PL to reflect that Test::More is only needed for testing, not
for building.
* In the documentation for each of the to_(bin|hex|oct|bytes) methods, add a
reference to the corresponding from_(bin|hex|oct|bytes) method.
1.999813 2018-04-18
* Fix CPAN RT #125108. Remove test files try.pl, t/author-bpi-big-mbf.t, and
t/release-unused-vars.t, which were included in the 1.999812 distribution by
accident.
1.999812 2018-04-17
* Fix CPAN RT #120351 regarding bpow(). Add test.
* Fix CPAN RT #120717 regarding tests now that '.' is not in @INC by default.
* Fix CPAN RT #122756 regarding testing for 64 bit integer support.
* Fix case when both accuracy and precision are set, resulting in a NaN. This
closes CPAN RT #124790.
* Fix typo in one of the change log entries for version 1.999811.
* Clearify documentation of rounding modes.
* Update the documentation of configuration parameters.
* Fix rounding and accuracy in bpi(). Extra digits in intermediate computation
were not used, causing the last digits to be inaccurate. In addition, the
rounding was incorrect in some cases.
* Use config() as a method, rather than a function. Also use config("xyz")
rather than config()->{xyz}.
* Correct more of the problems with rounding in the constructors. If rounding
arguments are given as arguments to the constructor, the constructor should
assign those values to the instance. If no rounding arguments are given, and
the constructor is called as a class method, the class rounding variables
should be assigned to the instance. Added test file
t/author-constructors-a-p-r.t to replace t/author-constructors-a-p.t, but
lots of tests are failing and (for now) commented out.
* Remove statements used for debugging.
* Fix typos.
* Cleaner log/exp-related code in Math::BigFloat.
* Remove unused variables.
* Add test file t/release-portability.t.
* Add test file t/release-whitespaces.t.
* Convert test file t/02pod.t to t/release-pod.t and t/03podcov.t to
t/release-pod-coverage.t.
* Reformat CHANGES to match the specification in CPAN::Changes::Spec and
CPAN::Meta::Spec.
* Expand tabs to spaces and clean up whitepace.
* Include tests that were previously commented out.
* Use $LIB as the variable name for backend math library.
* Import "carp" and "croak" from the Carp module.
* Math::BigInt isa Exporter, so Math::BigInt should require Exporter.
Math::BigFloat has Math::BigInt in @ISA, so it doesn't need to require
Exporter.
* Don't load Test::More when it isn't really needed. This speeds up processing
of author test files when they are skipped.
1.999811 2017-03-15 pjacklam
* Fix an old bug in the Math::BigFloat methods as_hex(), as_oct(), and
as_bin() methods resulting in loss of accuracy. This bug was introduced in
bug in Math-BigInt-1.76. Due to a naive copy and paste by me, and lack of
tests, this bug was also present in the newer to_hex(), to_oct(), and
to_bin() methods. This shows the bug, as it did not print "0xffff...":
print Math::BigFloat -> from_hex("f" x 30) -> as_hex();
* Fix incorrect formatting in the output from the Math::BigFloat methods
to_hex(), to_oct(), and to_bin() when the output was zero. A prefix was
added when it shouldn't have been.
* Add tests to bigintpm.inc and bigfltpm.inc for better testing of as_hex(),
as_oct(), and as_bin() as well as to_hex(), to_oct(), and to_bin().
* "Synchronize" tests and code formatting in bigintpm.inc and bigfltpm.inc.
1.999810 2017-03-01 pjacklam
* CPAN RT #120240 revealed that the problems with undefined values is still
present. After a close examination, I believe the only way to get this
really working is to to make blog() call objectify() differently depending
on whether the base for the logarithm is undefined or not. That way we can
avoid objectify() converting the undefined value to a zero. Ideally, we
should warn about undefined values when used in any other context, but we'll
handle that in a later release. See also the related changelog entry for
v1.999801.
* Fix the way the argument count is computed in objectify(). When an argument
count of 0 is given, it means that we should objectify all input arguments.
However, it turned out that the actual argument count was computed
incorrectly.
* Fix CPAN RT #120242 rearding c3 method resolution.
1.999809 2017-02-10 pjacklam
* When a new method is added to Math::BigInt or Math::BigFloat, and this new
method requires a new backend library method, die with a suitable error
message if the installed backend library does not support this new method.
The error message says that the method requires a newer version of the
backend library.
* Fix typos in Math::BigFloat and Math::BigInt.
* Add bfib() and blucas() to Math::BigInt. They return Fibonacci and Lucas
numbers, respectively. The actual computation of the numbers is done by the
backend library. Documented both methods in POD. Add test files bfib-mbi.t
and blucas-mbi.t.
* Add _fib() and _lucas() to Math::BigInt::Lib. They return Fibonacci and
Lucas numbers, respectively. Document both methods in POD. Add test files
author-lib-arithmetic-unary-_fib.t and author-lib-arithmetic-unary-_lucas.t.
1.999808 2017-01-11 pjacklam
* In Math::BigInt and Math::BigFloat, add methods bdfac() for double
factorial. Add tests for this method.
* In Math::BigInt and Math::BigFloat, add methods to_hex(), to_oct(), and
to_bin() for hexadecimal, octal, and binary string output without prefix.
Even for Math::BigFloat there is still only support for integer output. Add
tests for these methods.
* Add test for as_oct() corresponding to the old tests for as_hex() and
as_bin().
* In Math::BigInt::Lib, add method _dfac() for double factorial. Add
corresponding tests.
* In Math::BigInt::Lib, fix bug in overloaded "int".
* In Math::BigInt::Lib, implement much faster versions of _from_hex(),
_from_oct(), and _from_bin().
* In Makefile.PL, improve the wording in the message displayed if some of
the installed backend libraries are not a subclass of Math::BigInt::Lib (and
hence will not provide
* Fix minor bugs in some of the author library test files (t/author-lib*.t).
* Allow leading and trailing whitespace in the input to from_hex(),
from_oct(), and from_bin(). Add tests to verify. This is a regressions
(CPAN RT #119805).
1.999807 2016-12-23 pjacklam
* Add a message to Makefile.PL recommending upgrade if old libraries are
installed. This message is more or less equivalent to the one appearing in
Math-BigInt up until v1.997.
* Improve the documentation (POD) in Math::BigInt::Lib.
* Speed up _sqrt() and _root() in Math::BigInt::Lib.
* Remove checking for exception cases (cases that would return +Inf, -Inf, or
NaN) in Math::BigInt::Lib. It has been documented for a long time that such
checking should be done by the caller.
* Add library methods _to_bin(), _to_oct(), _to_hex(), which are equivalent to
the _as_bin(), _as_oct(), and _as_hex() methods respectively, except that
the _to_*() methods don't use a prefix in the output. This removes the need
for the frequent removal of the various prefixes. Now each _as_*() method
calls the equivalent _to_*() method, adds a prefix, and returns the output.
The _to_*() methods are faster than the equivalent _as_*() methods were.
* Add author test files for the methods _to_bin(), _to_oct(), and _to_hex().
* Add library method _to_bytes(). The method _as_bytes() would have been
called _to_bytes() if I had thought of it earlier. The method _as_bytes() is
now just an alias to _to_bytes(). The _to_bytes() method also fixes a bug
that was present in the _as_bytes() method. (CPAN RT #119346).
* Add author test files for the method _to_bytes().
* Add more tests for library methods _inc() and _dec(). When trying to bring
the Math::BigInt::BitVect library back to life I realized that the test
suite didn't catch certain errors in _inc() and _dec().
* Die if trying to use as_bytes() or from_bytes() with a backend library that
doesn't support the corresponding library methods.
* Correct minor errors in the output messages in the test files.
* Improve/correct various comments in the source code.
* More diagnostic output is displayed by the author test files if the
AUTHOR_DEBUGGING environment variable is set.
1.999806 2016-12-13 pjacklam
* Add more logic to Makefile.PL regarding INSTALLDIRS (CPAN RT #119199
and #119225).
* In the TODO file, remove stuff that has been implemented.
1.999805 2016-12-11 pjacklam
* Fix Makefile.PL so that this module installs over the core version.
* Add more tests for _nok() (binomial coefficient "n over k"). These new tests
revealed some problems with some of the backend libraries when _nok() was
given very large arguments.
* Remove t/Math/BigFloat/#Subclass.pm#, which is an Emacs temporary file
included by accident.
1.999804 2016-12-07 pjacklam
* Implement as_bytes(), as requested (CPAN RT 119096). Also implement the
inverse conversion from_bytes(). This applies to Math::BigInt only. (Alas,
these methods will be inherited from Math::BigInt into Math::BigFloat,
Math::BigRat etc. where the methods won't work. Fixing this class
relationship is an issue of its own.)
* Implement _as_bytes() and _from_bytes() in Math::BigInt::Lib. Preferably,
the various backend libraries will implement faster versions of their
own. Add author test files for testing these methods thorougly.
* Fix from_hex(), from_oct(), and from_bin().
- When called as instance methods, the new value should be assigned to the
invocand unless the invocand is read-only (a constant).
- When called as instance methods, the assigned value was incorrect, if the
invocand was inf or NaN.
- Add tests to t/from_hex-mbf.t, t/from_oct-mbf.t, and t/from_bin-mbf.t
to confirm the fix.
- Add new test files t/from_hex-mbi.t, t/from_oct-mbi.t, and
t/from_bin-mbi.t for better testing of these methods with Math::BigInt.
* Correct typo in Math/BigInt/Lib.pm (otherise -> otherwise) (CPAN RT 118829).
* Add POD coverage testing of Math::BigInt::Lib to t/03podcov.t.
1.999803 2016-12-03 pjacklam
* Remove BENCHMARK file. The information was obsolete.
* Use ExtUtils::MakeMaker rather than Module::Install in Makefile.PL
* Reorder CHANGES file (this file) so the newest entries appear at the top.
* Fix error in test information text in various author test files.
* Remove author information in LICENSE file.
* Inform that the TODO file is not up to date.
1.999802 2016-11-28 pjacklam
* When bzero(), bone(), binf(), and bnan() are used as constructors, don't
check whether the class allows the object to be modified. A constructor
isn't modifying any existing object. This applies to both Math::BigInt and
Math::BigFloat.
* Improve bgcd() and blcm(). This applies to both Math::BigInt and
Math::BigFloat.
1.999801 2016-11-23 pjacklam
* Fix, hopefully once and for all, the longstanding problem of handling undef
as an operand to mathematical methods. The only method that accepts undef as
an operand is blog(), where the second operand might be undef, as in
$x->blog() or $x->blog($b), where $b is undef. The undef signifies that
Euler's number should be used as the base. With this fix, we should be able
to get Math::BigInt::Lite working again.
* Add least common multiple method _lcm() to Math::BigInt::Lib, and add
corresponding test file t/author-lib-arithmetic-binary-_lcm.t and test data
file t/author-lib-arithmetic-binary-_lcm.dat.
* Remove internal function __lcm() which has become redundant now that _lcm()
is in the library.
* Make it possible to use bgcd() and blcm() as class methods, since other
methods can be used as class methods. This applies to both Math::BigInt and
Math::BigFloat.
* Fix blcm() with negative input. The LCM should always be non-negative. This
applies to both Math::BigInt and Math::BigFloat.
* Add tests for bgcd() and blcm() in t/bigintpm.t and t/bigfltpm.t.
* Fix tests for blcm() assuming that LCM(0,0) should be a NaN. LCM(0,0) is 0
by convention.
* Prefer Class->config('option') over Class->config()->{option}. However, this
does not seem to be working for all options. It seems that this won't work
properly until we move the global variables into the OO interface.
* Explicitly specify the library in all test files that are shared between
Math-BigInt and the library distributions (FaatCalc, GMP, Pari, ...) with,
e.g., "use Math::BigInt only => 'Calc';". This way, it will fail immediately
if the specified library can't be loaded rather than using the fallback
library.
1.999800 2016-11-15 pjacklam
* Upgrade bundled Module::Install from version 1.16 to version 1.17.
* Add Math::BigInt::Lib (lib/Math/BigInt/Lib.pm), a parent class for
Math::BigInt backend libraries.
* Use objects in Math::BigInt::Calc, not just array refs. Also use OO-style,
i.e., use $class->_add($x, $y) rather than _add($class, $x, $y).
* Not all library methods modify the invocand, so call library methods as,
e.g, $x = $LIB->method($x, $y) rather than just $LIB->method($x, $y).
* Math::BigInt::Calc is now a subclass of Math::BigInt::Lib.
* Add Math::BigInt::Lib::Minimal (t/Math/BigInt/Lib/Minimal.pm) for testing
inheritance from Math::BigInt::Lib.
* Minor simplification in Math::BigInt::Calc->_str().
* Speed up Math::BigInt::Calc->_root().
* Remove test files that were included in the previous release by accident.
* Add more tests and use more verbose output in some tests.
* Fix typo in lib/Math/BigFloat.pm
* Fix documentation error in lib/Math/Calc.pm
* Use Config::Tiny and an .ini file to handle the library specific
configuration for the author-lib*.t test files.
1.999727 2016-11-04 pjacklam
* Skip test exceeding the range of VAX floating point number in t/bigintpm.inc
(CPAN RT 118468).
* Fix typo in lib/Math/BigInt.pm (CPAN RT 118550).
1.999726 2016-07-15 pjacklam
* Re-insert Math::BigFloat->DESTROY, which was accidentally removed in
v1.999725.
1.999725 2016-07-13 pjacklam
Changes:
* Add method is_finite().
* In Math::BigInt and Math::BigFloat, remove warnings about deprecated usage,
at least until we have removed this usage from the "bignum" distribution.
These warnings were too annoying for some people.
Improvements:
* Faster bnok() when the library (backend) does not support it.
* In the Math::BigFloat method bpi(), use a precomputed list of digits when
the accuracy is <= 1000. This speeds up the trigonometric functions
considerably, when I will introduce range reduction in a later release. This
makes the _atan_inv() method redundant, so remove it. Also, the _alen()
library method is now only used in _log_int(), which is good, because it
isn't clear from the docs and tests what it was supposed to do.
Fixes:
* Fix bug in the Math::BigInt::Calc library method _digit(). It would
sometimes return undef or an empty string when it should have returned zero.
* Fix bug in the Math::BigInt::Calc library method _rsft(). It would sometimes
return two output arguments.
* Fix bug in the Math::BigInt::Calc library method _lsft(). When the number
zero was shifted N places in base 10, the result was not zero, but an
invalid object.
* Fix bug in the Math::BigInt::Calc library methods _and(), _or(), and _xor().
They always assigned zero to the first input argument (the invocand).
* Improve the Math::BigInt::Calc library method _log_int() for the cases when
the output is zero or one. Also simplify the code.
* Simplify the code for the Math::BigInt::Calc library method _zeros().
* Reformat Math::BigInt::Calc so it is easier to read, for me anyway.
* Add file t/author-bnok-mbi.t
* Add one test file for every method in the libraries, including
t/Math/BigInt/Lib/TestUtil.pm with test utilities.
* Clean up whitespace in all files in the distribution.
* Better testing in t/author-bpi-mbf.t
* The Math::BigInt::Calc library now always uses integers inside the objects,
so there is no longer any need for all the "0 + ..." to convert strings to
numbers, and the "int()" inside "length(int(...))" to determine the length
of an array element. The only case that needs "0 + ..." now is the
constructor _new(), whose input is a string.
Note, however, that the Math::BigInt::FastCalc library method _new() still
creates objects with leading zeros, so until that is fixed, we can't remove
all the "0 + ..." etc. until Math::BigInt::FastCalc has been modified.
1.999724 2016-06-19 pjacklam
* In Math/BigInt.pm and Math/BigFloat.pm, correct and improve to the
documentation, e.g., reorder the methods so that methods that belogin
together are grouped together.
* In Math/BigInt.pm and Math/BigFloat.pm, refactor the code so that methods
that belong together are grouped together. Also use consistent code
formatting.
* In Math/BigInt/Calc.pm, reformat the code.
1.999723 2016-06-09 pjacklam
* Add Math::BigInt and Math::BigFloat methods bnstr(), bestr(), and bdstr(),
as well as corresponding methods nparts(), eparts(), and dparts(). Also add
test files bdstr-mbf.t, bdstr-mbi.t, bestr-mbf.t, bestr-mbi.t, bnstr-mbf.t,
bnstr-mbi.t, bsstr-mbf.t, bsstr-mbi.t, dparts-mbf.t, dparts-mbi.t,
eparts-mbf.t, eparts-mbi.t, nparts-mbf.t, nparts-mbi.t, sparts-mbf.t, and
sparts-mbi.t.
* Fix documentation errors.
1.999722 2016-04-26 pjacklam
* Fix bug in bone() and binf() when used as a function. The error caused
warnings about using an unitialized variable. This fix applies to both
Math::BigInt and Math::BigFloat.
1.999721 2016-04-26 pjacklam
* Prevent Math::BigFloat methods band(), bior(), bxor(), and bnot() from
modifying unmodifiable objects.
1.999720 2016-04-26 pjacklam
* Overloaded 'int' should not modify it's argument.
* Better documentation of blsft() and brsft().
1.999719 2016-04-25 pjacklam
* Revert the change to Math::BigFloat's blsft() and brsft() methods, which
truncated the input (and output) to integers. However, now convert the base
to an object only when the base isn't an object already. Also return NaN if
any of the three operands is a NaN.
* Change t/bigfltpm.inc to reflect the changes to blsft() and brsft(). Also,
when a method should be tested, actually test that method, not the
overloaded operator, which doesn't necessarily behave in the exact same
manner as the method. This applies to the methods binc(), bdec(), bpow(),
badd(), bsub(), bmul(), bdiv() in scalar context, brsft(), blsft(), and
bmod().
* The first output argument from objectify() is the class name, so use the
variable name $class, not $self.
1.999718 2016-04-22 pjacklam
* Improve documentation on large, unquoted input values to Math::BigInt.
* Remove stuff from bitfltpm.inc that was placed into author-numify-mbf.t, but
accidentally still present in bitfltpm.inc. Adjusted test counts as needed.
* Fix file headers in author-bmod-bdiv-mbi.t and author-btmod-btdiv-mbi.t.
* Add bnan(), binf(), and bsub() methods to Math::BigFloat. This is a step
along the way to having Math::BigFloat no longer being a subclass of
Math::BigInt.
* Using bnan, binf(), bzero() and bone() as functions is deprecated. This is a
step along the way to a pure object oriented design.
* When bnan() and binf() are used as instance methods, they no longer delete
the accuracy and precision instance variables.
* Add test files from_bin-mbf.t, from_oct-mbf.t, and new-mbf.t.
* Remove some code for Perl prior to 5.6. Such old versions are no longer
support anyway.
* Fix buggy handling of NaN in bcmp().
* Add methods beq(), bne(), blt(), ble(), bgt(), and bge() to Math::BigInt and
Math::BigFloat. These methods are called for the overloaded operators.
* Add overloading of '==', '!=', '<', '<=', '>', to to Math::BigInt and
Math::BigFloat and fix the broken overloading of '>='. These overloaded
operators now behave like the equivalent core Perl operators.
* Add test file author-relop-mbi-mbf.t for testing bcmp(), beq(), bne(),
blt(), ble(), bgt(), and bge(), as well as the overloaded operators '==',
'!=', '<', '<=', '>', and '>='.
* 'int' now truncates a Math::BigFloat object to an integer without converting
it to a Math::BigInt. When an object becomes a Math::BigInt, further
computations with that object as invocand causes the arguments to be
converted to Math::BigInt objects too, leading to unexpected results. This
is confusing people. Unless downgrading is in effect, no Math::BigFloat
object should become a Math::BigInt unless a Math::BigInt is explicitly
requested.
* For Math::BigFloat, modify bitwise operations brsft() and brsft(), and add
band(), bior(), bxor(), and bnot(). These now handle floating point numbers
the same way as core Perl does, i.e., truncate non-integers to integers
before applying the bitwise operator. This change will also make Perl's
behaviour more consistent whether 'use bignum' is in effect or not.
* Add overloading of '~' (bitwise not). It just calls bnot(), which has been
implemented for ages.
* Fix error in POD for bone().
* Take parts of the code in t/calling.t and move it into the new files
t/calling-class-methods.t and t/calling-instance-methods.t.
* Improve test descriptions in t/mbimbf.inc.
1.999717 2016-04-16 pjacklam
* Using new() with an undefined argument no longer gives a warning. Explicit
use of this is discouraged, but it is sometimes used by the modules
themselves issuing warnings that is confusing to the end user. Just
uncomment the code, since we plan to reintroduce this warning later.
* Avoid using L<> around e-mail addressess in POD.
1.999716 2016-04-03 pjacklam
* $x->new(...) can no longer be used to assign a value to $x. This was a
mistake introduced in v1.999712. As the name "new" implies, it should always
return a new object.
* Using new() with no argument no longer gives a warning. This use has been
discouraged, in favour of bzero(), for many years, but people are still
using it, so I am reintroducing the support for this.
* Added btdiv() and btmod() for truncated division (T-division) and ditto
remainder. Add tests.
* Add test files author-bmod-bdiv-mbi.t author-btmod-btdiv-mbi.t with more
thorough testing of bdiv(), bmod(), btdiv(), and btmod().
* When new() is used as an instance method, the new object is initialized as a
copy of the invocand.
* Move test for numfiy() of +Inf, -Inf, NaN, and big integers from
bigfltpm.inc and bigintpm.inc into author-numify-mbi.t and
author-numify-mbf.t.
* Improved wording and fixed typos in earlier changelog entries.
1.999715 2016-01-05 pjacklam
* Fix Math::BigFloat->bexp() based on patch by DANAJ (Dana Jacobsen).
* Add Math::BigFloat->bexp() tests to "t/biglog.t" and new file
"t/author-bexp-mbf.t".
* Fix flawed test in test_bpow. It used ok($x, $y) rather than is($x, $y).
* Add better descriptions (test names) to a few tests.
* Wrap long line in the CHANGES file.
1.999714 2016-01-03 pjacklam
* Add code to speed up Math::BigFloat->batan(). Thanks to DANAJ (Dana
Jacobsen) for the patch.
* Re-write Math::BigFloat->batan2() completely, except for the parts related
to the rounding. The old version was sometimes correct, sometimes off by pi,
and sometimes very inaccurate. Also add more tests.
* Make it clearer in Math::BigFloat->bpi() when it is called as a method vs.
as a function.
* The Math::BigFloat->bpi() method can now be used as an instance method to
assign pi to $x, as in $x->bpi().
* Add tests for as_oct().
* Minor simplifications in Math::BigInt->as_oct() and
Math::BigInt::Calc::_as_oct().
1.999713 2015-12-31 pjacklam
* Fix Math::BigInt->new(), which had a faulty handling in the shortcut for
non-zero scalar integers with no non-zero exponent, like "12", "12.000",
"12e3", and "12.000e4". Added tests for this in t/bigintpm.inc.
1.999712 2015-12-29 pjacklam
* Fix bug in internal function _e_add() and _e_sub() which causes it to return
"-0" in some cases.
* Let new() be used for assignment. Now $x->new(3) assigns 3 to $x.
* Improve code in new() for non-zero scalar integers with no exponent.
* Allow both "inf" and "infinity". Allow a leading sign, and ignore letter
case. This is to be consistent with core Perl.
* Be more consistent about allowed whitespace in input. E.g., "23 " gave 23,
but "inf " gave a NaN.
* Core Perl allows both "0x" and "0X" as hexadecimal prefix, and both "0b" and
"0B" as binary prefix, so we do too. Previously, only 0x and 0b were
allowed.
* Math::BigFloat now has its own from_bin() method which supports binary
floating point numbers, e.g., "0b1.1001p-4". This complements from_hex().
* Math::BigFloat now has its own from_oct() method which supports octal
floating point numbers, e.g., "1.3267p-4". This complements from_hex().
* The Math::BigInt and Math::BigFloat methods from_hex(), from_oct(), and
from_bin() can now be used as instance methods to assign values to the
invocand, e.g, $x->from_oct("10") assigns 8 to $x.
* Update documentation. Perl now uses "Inf", not "inf" to represent infinity.
* When the new() method is called with an undefined argument, the round
parameters are now passed on to bzero(). This applies to both Math::BigInt
and Math::BigFloat.
* Replace "UNIVERSAL::isa($this, $that)" with "$this->isa($that)", and ditto
for "can()", where possible. Not every instance of "UNIVERSAL::Isa()" has
been replaced, though, since the change causes some tests to fail. This must
be looked into.
* Simplify the copy() methods. Always copy accuracy and precision parameters,
even when they are undefined.
* Reformat more of the code in accordancw with the "perlstyle" manual page.
This makes the code a lot easier to read -- for me, anyway.
* Use a more generic regex in t/calling.t, since the exact wording of the
error message depends not on the Perl version, but on the module that does
the version checking.
* Avoid infinite loop in the Math::BigFloat->batan() method. Thanks to DANAJ
(Dana Jacobsen) for the patch. This was not intended to be added before the
next release, but was included in this release by accident.
1.999710 2015-11-12 pjacklam
* New method Math::BigFloat -> from_hex() which supports hexadecimal floating
point numbers, e.g., "0x1.999ap-4".
* New test file t/from_hex-mbf.t for testing Math::BigFloat -> from_hex().
* Add 'from_hex' and 'from_bin' to list of methods in the Math::BigInt POD.
1.999709 2015-11-06 pjacklam
* Represent and return zero as 0E0, not 0E1. The old POD said "A zero is
represented and returned as 0E1, not 0E0 (after Knuth)." I find no
references to Knuth ever having said this. The closest reference I can find
is that Knuth says 0**0 should be defined to be 1, not 0, but that is
something else than 0e0, which is 0*10**0. I have yet to see any other
mathematical software that represents and returns zero as 0e1 rather than
0e0.
* Required version of Test::More is 0.9301.
1.999708 2015-11-03 pjacklam
* Use bxxx() method names consistently, rather than mixing bxxx() and fxxx()
in code and test files. The fxxx() methods for Math::BigFloat objects are
still available through autoloading. However, we leave the fround() method
in Math::BigInt, as it seems to provide some kind of compatibility with
Math::BigFloat.
* Correct author information in the README file.
* Remove INSTALL file, which by accident wasn't removed in v1.999707.
* Use present tense, not past tense, in CHANGES file.
* Add '#!perl' to Makefile.PL for correct syntax highlighting in editors
supporting this.
* Use Math::Complex::Inf() in testfiles also (for generating Perl scalar
infinity) since it is more portable.
1.999707 2015-10-29 pjacklam
* Add dependency on Math::Complex 1.39 for Math::Complex::Inf(), which is
used for numifying infinity.
* Update author information.
* Update information in the file README.
* Remove the files INSTALL and LICENSE as this information is already covered
in the file README.
* Enable 'use warnings' in all modules. We require a Perl newer than 5.6.0
anyway.
* Replace 'use vars ...' with 'our ...'. We require a Perl newer than 5.6.0
anyway.
* Avoid indirect object syntax in documentation.
* Moved 'Test::More' from 'build_requires' to 'test_requires' in Makefile.PL.
1.999706 2015-10-28 pjacklam
* Correct release date of v1.999705 in CHANGES.
* Add code and tests for numify() on non-finite objects.
1.999705 2015-10-26 pjacklam
* Avoid using "my" in a false conditional. See "Deprecated use of my() in
false conditional" in perldiag(1).
* Faster algorithm for bpi() when accuracy is >= 1000.
1.999704 2015-09-25 pjacklam
* objectify() in lib/Math/BigInt.pm now uses 'isa' not 'eq' to check object
relationship. This is necessary for correct handling of subclasses.
* objectify() in lib/Math/BigInt.pm no longer expects as_int(), as_number()
and as_float() to return objects, but allows them to return numbers
formatted as strings. This is used by some other modules on CPAN.
* Better documentation of as_int() and as_number() in lib/Math/BigInt.pm.
* Add documentation for as_float() in lib/Math/BigFloat.pm
* Add test files t/objectify_mbf.t and t/objectify_mbi.t.
1.999703 2015-09-21 pjacklam
* Fix blog() in Math::BigInt and Math::BigFloat to work correctly regardless
of the base.
* Correct existing tests in bigintpm.inc and bigfltpm.inc.
* Update test plans (number of tests) in t/bare_mbi.t, t/bigintpm.t, and
t/sub_mbi.t.
* Add test files t/blog-mbf.t and t/blog-mbi.t for better testing of the
blog() methods.
1.999702 2015-09-17 pjacklam
* The overloaded log() is a unary operator, so don't pass additional
arguments.
* Fix blog() so the cases $x->blog() and $x->blog(undef) work correctly. An
undefined base means that blog() should use base e (Euler's number).
* Both CORE::log() and other mathematical software returns inf for log(inf),
so we do the same.
* Add tests for log() as well as templates for future tests of the other
overloadable functions.
* Improve descriptions of a few tests.
1.999701 2015-09-11 pjacklam
* The POD documentation, as well as the comments in the code, said that
$x->bdiv($y) in list context should return quotient $q and remainder $r so
that $x = $q * $y + $r, and that the remainder (modulo) $r should correspond
to Perl's % operator as well as the bmod() method. This has not been the
actual behaviour. This is now fixed. In scalar context, only the quotient is
returned.
* Clearer POD documentation for the bdiv() and bmod() methods.
* All non-integer input values to Math::BigInt gave a NaN, except non-zero
numbers in the range (-1,1) that were written without an exponent, e.g.,
"-0.75" and "0.5". Now also these return a NaN.
* Input values with a large (absolute value) negative exponent, e.g.,
1e-9999999, now return NaN. The former behaviour was to die with the message
"Quantifier in {,} bigger than 32766 in regex; marked by ..."
* Intermediate computations in blog() increased the number of digits
significantly in some cases. Now reduce the number of digits by rounding.
However, keep some extra digits for remaining intermediate computations
before the final rounding.
* When $x is a Math::BigFloat, $x -> bceil() and $x -> bint() for -1 < $x < 0
returned -0. Negative zero is never used by Math::Big(Int|Float), and care
has been taken to avoid it, so this bug is surely an oversight.
* Explicitly specify the backend (lib => 'Calc') in t/mbimbf.t for easier
release management of the backend distributions.
* Add "use warnings" to test scripts, since Perl 5.6.2 is required anyway, and
"use warnings" was introduced in Perl 5.6.1.
* Modified test scripts so the difference between the test files in the
Math-BigInt distribution and the backend distributions are as few and as
small as possible. This makes for easier release management.
1.9997 2015-08-12 pjacklam
CHANGES
* Add recent changes.
t/bigintpm.inc
* Correct spelling errors.
t/upgrade.inc
* Correct spelling errors.
1.9996 2015-08-12 pjacklam
CHANGES
* Add recent changes.
* Use present tense in change descriptions.
lib/Math/BigInt.pm
* Change incorrect use of ok() to is() in example.
1.9995 2015-08-11 pjacklam
CHANGES
* Move changes that were incorrectly reported as being for the release 1.9994
when they were in fact for release 1.9993.
* Add changes both for release 1.9994 and 1.9995.
lib/Math/BigInt.pm
* Break lines to avoid lines with more than 80 characters.
* Improve objectify() for better handling of subclasses.
1.9994 2015-08-10 pjacklam
CHANGES
* Add recent changes.
lib/Math/BigFloat.pm
* Fix blog() which sometimes returns incorrect result.
* bdiv() in list context now returns the integer quotient and the remainder.
t/bigfltpm.inc
* Modify tests for blog() in list context.
t/biglog.t
* Change incorrect use of ok() to is().
t/upgrade.inc
* Modify tests for blog() in list context.
inc/Module/Install*
* Upgrade bundled Module::Install from version 1.08 to version 1.16.
1.9993 2014-04-03 pjacklam
BUGS
* Add reference to CPAN RT for the Math-BigInt distro.
CHANGES
* Add recent changes.
examples/hailstone.pl
* Remove this file as it doesn't seem to be working.
lib/Math/BigFloat.pm
* Correct spelling errors.
* Reformat code to avoid long lines.
* Improve POD formatting.
* Add meta-documentation (CPAN ratings, CPAN testers matrix, etc.)
* Add the bint() method.
lib/Math/BigInt.pm
* Correct spelling errors.
* Reformat code to avoid long lines.
* Improve POD formatting.
* Add meta-documentation (CPAN ratings, CPAN testers matrix, etc.)
* Add the bint() method.
* Remove references to the obsolete Math::Big
lib/Math/BigInt/Calc.pm
* Correct spelling errors.
* Added meta-documentation (CPAN ratings, CPAN testers matrix, etc.)
lib/Math/BigInt/CalcEmu.pm
* Correct spelling errors.
* Improve POD formatting.
* Add meta-documentation (CPAN ratings, CPAN testers matrix, etc.)
* Remove references to Math::BigInt::BitVect, which is no longer on CPAN.
Makefile.PL
* Remove code that checks for compatible versions of distributions that
depend on Math-BigInt. Such checking should be done in the distributions
that depend on Math-BigInt, not in Math-BigInt itself.
NEW
* This file now only refers to the change log.
t/bigfltpm.inc
* Add tests for fint().
t/bigintpm.inc
* Add tests for int().
t/upgrade.inc
* Add tests for int().
t/*.t
* Increment test counts as needed for the new tests in the t/*.inc files.
inc/Module/Install*
* Upgrade bundled Module::Install from version 1.01 to version 1.08.
1.9997_11 2012-12-10 pjacklam
This release introduces no changes in the library code, i.e., the .pm files in
the 'lib' directory, but there are a lot of changes in the test files. Since
there are so many changes, I let this be a development release.
* Add 'use strict;' and 'use warnings;' to all test files.
* Reformat code in the test files according to the "perlstyle" manual page.
This makes the code a lot easier to read -- for me, anyway.
* Decrement required version of Perl from v5.6.2 to v5.6.1. All tests pass
when running the test suite with Perl 5.6.1 on Cygwin.
* Replace "use vars ..." with "our ..." in test files.
* Replace "BEGIN { unshift @INC, 't'; }" with "use lib 't';" in test files.
* Use "our $x; $x = ...;" rather than "our $x = ...;" since the latter causes
Perl 5.6.1 to complain about variables only used once.
* Add comment to all tests. Now the tests no longer says just "ok 123", but
rather "ok 123 - $x->blog(2)" etc. This makes it easier to identify failed
tests, especially in the smoke testing reports.
* Fix various flawed tests, e.g., ok($x, 2) was used testing whether $x was 2.
* Use the skip() feature of Test::More for skipping tests.
* Use more descriptive variable names in test files.
* Remove unused variables in test files.
* Move variable declarations to limit their scope in test files.
* Remove trailing whitespace in test files.
* Wrap (most) lines to fit 80 columns in test files.
1.997 2011-09-04 pjacklam
* Document actual behaviour of from_xxx() methods. [perl #85334] (Peter John
Acklam)
* Make bmuladd() able to handle third arg properly. [perl #85482] (Peter John
Acklam)
* Add sign function bsgn() as a complement to babs(). (Peter John Acklam)
* Fix objectify()'s handling of "foreign objects". (RT #16221 and #52124)
(Peter John Acklam)
* Rewrap some verbatim pod in Math::BigInt. (Father Chrysostomos)
* Correct links to sections. (Alexandr Ciornii)
* Remove incorrect formatting inside verbatim paragraphs. (Alexandr Ciornii)
* Upgrade bundled modules in "inc" to latest version. (Peter John Acklam)
* Include "^MYMETA\.(yml|json)\z" in MANIFEST.SKIP. Whereas META.* are
generated by the distribution author at packaging time, MYMETA.* are
generated by the end user at configure time after any dynamic dependencies
are known. (Peter John Acklam)
1.993 2011-02-26 pjacklam
* Change default backend library from Math::BigInt::FastCalc to
Math::BigInt::Calc, which is included in the Math-BigInt distro. This
avoids recursive distribution dependency (RT #65976) (Peter John Acklam).
1.992 2011-02-18 pjacklam
* Math::BigInt::Calc->_nok(): Use symmetry property nok(n,k) = nok(n,n-k) to
speed up execution when k is large. Also general code cleanup. (Peter John
Acklam).
* Math::BigInt::Calc->_gcd(): Speed up by reducing amount of data copying
(Peter John Acklam).
* Add '01load.t' for basic module loading and diagnostics useful for
debugging. Rename '00-signature.t' to '00sig.t', 'pod.t' to '02pod.t', and
'pod_cov.t' to '03podcov.t' (Peter John Acklam).
* Math::BigInt:: Make from_hex(), from_oct(), and behave more like hex() and
oct() in the Perl core, and make from_bin() consistent with from_hex() and
from_oct() (this is related to RT #58954) (Peter John Acklam).
* Math::BigInt::Calc->_rem(): Modify first input arg always, not just
sometimes (Peter John Acklam).
* Math::BigInt::Calc->_modinv(): be more consistent with the _modinv() method
in other libraries (Math::BigInt::GMP, etc.) (Peter John Acklam)
* Math::BigInt::Calc->_nok(): use symmetry property nok(n,k) = nok(n,n-k).
This cuts computation time tremendously when n and k are large (Peter John
Acklam).
* Math::BigInt::Calc->_gcd(): quickly handle zero cases, avoid code
duplication, and always modify the first input argument in-place (Peter John
Acklam).
* Clean up code and add more code comments (Peter John Acklam).
* Fix typos (Peter John Acklam).
1.991 2011-02-05 pjacklam
* Add workaround for library inconsistencies (Math::BigInt::Calc vs.
Math::BigInt::GMP). This makes older versions of Math::BigInt::GMP
work with latest version of Math::BigInt (Peter John Acklam).
* Correct and extend API documentation (Peter John Acklam).
1.99_05 2011-01-29 pjacklam
* Fix typos (reminder -> remainder etc.) (Peter John Acklam)
* Fix Math::BigInt::Calc::_num returning NaN, not Inf, when it overflowed
(Peter John Acklam) (Closes: RT #25274).
* Fix Math::BigFloat->bcmp() so it can handle arbitrarily large exponents
(Peter John Acklam) (Closes: RT #62764).
* Fix bmodpow() in Math::BigInt 1.99 mis-calculating powers of one
(Peter John Acklam) (Closes: RT #63237).
* Fix bmodpow() and bmodinv() in Math::BigInt to handle negative input
(Peter John Acklam) (Closes: RT #61543)
* Clean up whitespace (Nicholas Clark).
* Added file t/00-signature.t for testing SIGNATURE (Peter John Acklam).
Complete version history of the rewrite project
===============================================
If you just want to see which things are new and different from the original
Math::* in the Perl core, see HISTORY.
##############################################################################
Math::BigInt::Calc:
0.52 2007-09-16 Tels
* fix 64bit ints on Perl v5.8.0 (thanx zefram)
0.51 2007-05-30 Tels
* use CORE::hex() instead of hex() to help bigint/bignum/bigrat
* use 9 digit parts on 64bit integer or long double systems
0.50 2007-05-05 Tels
* speed up _mul() by "use integer;"
* we do not need to remove zeros after mul()
* implement an alternative algorithm for _fac()
0.49 2007-04-16 Tels
* API version 2.0 support: add _1ex(), _alen()
* make _fac() about twice as fast
0.48 2007-01-27 Tels
* support for octal numbers
0.47 2005-05-17 Tels
* remove shortcut in div(), it wasn't working properly
0.46 2005-03-29 Tels
* avoid crash in FastCalc by making $BASE and $BASE_LEN use vars qw//;
0.45 2005-03-20 Tels
* fix the div() shortcut for short numbers to actually work
0.44 2005-01-01 Tels
* small cleanups
* shortcut for numbers of same length in _div, where X > Y
0.42 2004-10-10 Tels
* fix critical bug in _from_hex() with parts that were to big for one part
(introduced in v1.72, thanx Mark Lakata for finding it!)
0.41 2004-07-30 Tels
* from_hex() convert 28 bits (vs 16) at a time, faster (helps from_bin(), too)
* potential bug in padding with '0' in _digit()
* fixed undef warnings in fceil(0.222222222222...) (thanx kenny!)
* removed the unused integer-detection code and combined the two BEGIN blocks
0.40 2004-03-12 Tels
* added: api_version(), _ten(), _two(), _is_ten(), _is_two(), _gcd()
* streamlined: is_foo() methods
* _new() takes scalar, not scalar ref
* _str() returns scalar, not scalar ref
* _and(): bugfix for [perl #26559]: negative arguments that are shorter
than the positive one caused an error due to cutting instead padding
* _ior(): forgot to calculate the proper sing of result, making, for
instance, 30 | -4 go wrong
0.39 2004-01-25 Tels (not released)
* _zeros(0) is 0, not 1
0.38 2003-12-30 Tels
* guess _log_int() result based on $base if $base < $BASE
* _pow() handle cases 0 ** Y, 1 ** Y, X ** 0 and X ** 1
* _new(): shortcut for short numbers, makes MBI->new() about 20% faster
* _root() was wrong for numbers like 9 (0b1001) because they start with
the pattern /^0b1(0+)/ (missing '$' in regexp) and after fixing this
it was dead slow for large numbers.
0.37 2003-12-11 Tels
* implemented _log_int() with a simple and fast "iterative" method
* fixed bug in _root(): int() rounds sometimes wrong, so use sprintf()
* _as_bin() and _as_hex() are faster (for small values) due to inlining
is_zero()
* _acmp() is about 26% faster for very small numbers or numbers that
differ in length, and slightly faster for bigger numbers. This helps
both bacmp() and bcmp()
* _fac() did:
+ not modify $x in place for small arguments
+ something strange for large arguments
+ not handle 0..2 optimal (code now simplified)
* _as_bin() used %b, which was not known to v5.5.3 - workaround that
* implemented _log_int(), which is simple and very fast
* implemented the missing pieces for _root() (which is quite fast)
0.36 2003-08-31 Tels
* fixed a bug in div_use_div() that computed remainder wrong if X == X and
X was very large
* fixed a off-by-one error discovered with mbi_rand.t in _div_use_XXX()
(one internal in $x overflowed, thus the wrong computation)
0.35 2003-07-06 Tels
* fixed a bug in _floor() which caused ffloor(0.1234567) to fail.
(Thanx to cpan@ali.as for finding it and sending a fix/testcases)
* make _as_hex() and _as_bin() handle 0, and make them faster for very
short numbers (less than BASE_LEN digits)
0.34 2002-09-27 Tels
* fixed bug in mul_use_div() shortcut that used * $RBASE instead of / $MBASE
* $caught & 1 != 0 vs ($caught & 1) != 0 (changed to $caught != 2)
* $i %= $MBASE does not work on ARM (v5.003), so make it $i -= $car * $MBASE
* removed unused LEN_CONVERT code (smaller memory footprint)
0.33 2002-09-09 Tels
* _fac() keep $n as scalar if possible
* test for when to USE_MUL or not was inverted
* _mul() is about 6 times faster if $y is small and $x is big
0.32 2002-08-21 Tels
* fixed bug in _rsft() that did not set result to 0 in some cases
* _modinv() now works, thanx to the all-positive algorithm
* much more tests in bigintc.t (taken over from FastCalc)
0.31 2002-08-13 Tels
* _acmp() no longer calls _len() => tad faster
* some cleanup of old code, added some more comments
0.30 2002-06-10 Tels
* undef mul/div in case Calc.pm get's loaded twice
* fix in _as_hex() and _as_bin() for older Perls
* speedups in _pow() and _modpow()
0.29 2002-06-09 Tels
* filled in _modpow()
0.28 2002-05-30 Tels
* added _modinv(), _modpow() (not yet implemented)
0.26 2002-03-17 Tels
* a fix in _rsft() that left empty array instead of (0)
* a fix in _sub(): early out made -1 + 100000000001 == 0 (if length($y) > 8)
0.25 2002-03-03 Tels
* started _square() (not done yet)
0.24 2002-02-27 Tels
* streamlined _mod() shortcuts
* _div() has shortcut if $y is very small
0.23 2002-02-24 Tels
* from_bin() repack input and use from_hex(): twice as fast
0.22 2002-02-10 Tels
* _sqrt1() => _sqrt() (oups)
* much better guess for _sqrt() resulting in faster sqrt
* added _fac()
0.20 2002-01-07 Tels
* better detection of higher-int-only base (but disabled due to failures)
* streamlined converting
* turned dual-basis off by default (now 7-7 on 32 bit and 9-9 on most 64 it)
* _str() uses int() on first part to avoid '0000' instead of '0'
0.19 2001-12-23 Tels
* first working version of using two different bases: one for mul/div, the
other for all other ops, including converting via _to_large()/_to_small()
0.18 2001-12-20 Tels
* added _as_hex() and _as_bin() with 16 bit chunks
* from_bin() now uses oct() and 16 bits per iteration
* removed needless return statements
0.17 2001-12-06 Tels
* added _sqrt() for more speed
* _sqrt() shortcut for small (< $BASE) numbers for better performance
* shortcut in _mul for small numbers (< $BASE_LEN2)
* added _and, _or, and _xor and let them use more than 16 bits
* find out how many bits _and, _or and _xor can safely use (cap at 23)
* div() might leave empty array, so __strip_zeros fixes these
* streamlined _acmp()
* cap of 5 for BASE for UTS and UNICOS/Cray
* better test to find out what BASE should be (use +0.0 to force floats)
0.16 2001-11-19 Tels
* fixed comments a bit
* finished _mod() when $y < $BASE and $BASE % $y != 0 and $BASE % $y != 1
* streamlined _mod() loops a bit
* added _pow() for faster bpow()
* small fix to make 5.005_03 happy ($x = shift @prod vs $x = shift @prod || 0)
0.15 2001-11-11 Tels
* added _dec() and _inc() for much faster $x++ and $x--
0.14 2001-11-04 Tels
* added _mod() for faster $x % $y
0.13 2001-10-23 Tels
* better detection of BASELEN by matching against expected pattern
0.12 2001-10-03 Tels
* _div: 99999 => $BASE-1 ($MAX_VAL), that made some div's fail if $BASE != 5
0.11 2001-09-07 Tels
* automatically USE_MUL or USE_DIV
0.10 2001-08-24 Tels
* no longer export anything, ignore import calls
0.09 2001-07-20 Tels
* don't use warnings for older Perls
0.08 2001-07-15 Tels
* fixed bug in mul() shortcut
0.07 2001-07-15 Tels
* applied Philip Newtons spelling and doc patch(s)
* accidentally had the old, slow mul() code in. Oups.
* fixed also a bug in that new code
* also the speedup in mul() occurs with $x having lots of zeros, not $y.
* first argument is always classname, so removed checks and shift
* shift in base ten by _lsft() and _rsft()
0.06 2001-07-09 Tels
* first release
##############################################################################
Math::BigInt::CalcEmu:
0.04 2004-03-12 Tels
* removed unnec. emulation routines (all except _signed_foo)
0.03 2004-01-13 Tels
* $VERSION was overriding the $VERSION from MBI (Thanx Gisle Aas!)
0.02 2003-12-30 Tels
* the code in Calc::_root() uses now sprintf(), but the one in Emu was not
0.01 2003-12-26 Tels
* first version, taken over all the code from BigInt
##############################################################################
Math::BigInt::Scalar:
0.11 2002-01-07 Tels
* fixed version
* added DESCRIPTION section to stop pod2man complaining
* added _dec, _inc
0.10 2001-08-24 Tels
* no longer export anything, ignore import calls
0.06 2001-07-20 Tels
* don't use warnings for older Perls
0.05 2001-07-15 Tels
* first argument is always classname, so removed checks and shift
0.04 2001-07-09 Tels
* first release
##############################################################################
Math::BigFloat:
1.60 2008-04-20 Tels
* fix #34459: bsqrt() breaks on floats with enough digits (Thanx Niko Tyni!)
* fix #35238: batan2() handles inf/+inf wrong
* fix #35162: MBI segfault (as_number(Math::BigRat()) was wrong)
1.58 2007-06-30 Tels
* remove Exporer from @ISA
* support config('lib') as shortcut for config()->{lib}
* add bpi(), bcos(), bsin(), batan(), batan2() methods
* add bmuladd()
* streamline the is_xxx() and copy() methods
1.57 2007-05-05 Tels
* add bnok() method (n over k)
* add all the missing modify() hooks
1.55 2007-04-16 Tels
* make bexp() much faster (esp. under GMP) by caching the first coefficients
and rewriting the inner loop
* support "try" and "only" in import()
1.54 2007-04-09 Tels
* fix bug #21747: Re: weirdity in bignum... (powers and high precision):
infinite loops for blog() (and consequently bpow()) if you requested
an accuracy greater than 67 digits (uses _log() now, and not blog())
Thanx to darconc!
* cache the result of _log(2) and _log(10) so that subsequent calculations
can re-use the already done work
* instead of computing _log(10), compute _log(1.25) and _log(2) and then do:
_log(1.25 * 2 * 2 * 2) = _log(1.25) + _log(2) + _log(2) + _log(2)
This makes computing _log(10) much faster, so that computing blog(N) is
about a factor of 5 faster when N >= 10 or N <= 0.1
* add bexp()
1.53 2007-03-04 Tels
* fix #25144: [PATCH] Math::BigFloat->new considers any reference a BigInt
(Thanx mschwern!)
* fix bug #13866: NaN (in bignum queue)
* fix bug #21586: Incorrect result when comparing with NaN
* fix bug #15896: "==" overloading is broken for "NaN"
1.52 2007-01-27 Tels
* fix brsft() and bpow() in list context only return on number (bug #21413)
* make as_int() return a BigInt, too (not just as_number()) (bug #21412)
* add as_oct()
* bpow(): handle negative X and negative Y (instead of returning NaN)
1.51 2005-04-10 Tels
* fix new() to work with Math::BigInt::Pari
1.50 2005-03-29 Tels
* fix rounding doc, add notes about prevision vs. accuracy
* set FastCalc as default (we still use whatever MBI uses)
1.49 2005-03-20 Tels
* remove dependecy on Scalar::Util in bdiv()
* bdiv() cache result of "!$y->is_one()" for wantarray case to make
($res,$rem) = $x->bdiv($y); about 10% faster
1.48 2005-01-01 Tels
* use new interface to _scale_a() and _scale_p() in BigInt
* add bneg() and inline is_zero() in it, making it 1.6 times faster
* replace ref($_[0]) w/ undef when it isn't actually needed. This
makes some ops (bsstr(), bneg etc) about 2% faster for small numbers
* use MBI::_register_callback() to get notified of lib changes
* bgcd()/blcm() never worked, so fix them for integers and add tests
1.47 2004-10-10 Tels
* inf/NaN fixes for bpow()
* eliminate the need for _zeros() in new() (speed-up for GMP et. al.)
* eliminate _is_zero() in new() (small speed up)
* added shortcut for simple numbers in new() (speed up)
1.46 2004-08-13 Tels
* blog(10,10) ($x == $y) returned '1.0000...' instead of '1'
1.45 2004-07-30 Tels
* simple inherit bsub() from BigInt, also fixes bsub() failing under
$x -= $x - Thanx Peter J. Acklam!
* bdiv() failed when passed a variable twice (thanx Peter J. Acklam!)
* bfround() and bround() are about 10% faster when going via Math::BigInt's
bround() due to constructing a fake BigInt instead of going via ->new()
* fixed undef warnings in bpow(0,$y) ($y non-integer) (thanx kenny!)
1.44 2004-03-12 Tels
* bpow() computed -X ** Y wrong for Y that are odd
* use $HALF instead of 0.5 to speed up broot()
* use Calc instead of BigInt for parts, that makes it roughly 2x faster
it also saves memory (419 vs. 767 bytes per (small number) object)
* bmod() did needlessly test for NaN arguments twice
1.43 2004-01-13 Tels
* small fixes in AUTOLOAD
* delete $x->{_a} vs. $x->{_a} = undef to save memory
1.42 2003-12-30 Tels
* ffac(inf) is inf, not NaN
* flog() calculate integer result first, and if it fits, return it
this makes it much faster in case the result is a perfect integer
* require (instead of use) Exporter
* froot() calculates an integer result first, and it if fits, returns it
1.41 2003-12-11 Tels
* flog(): 0.5, 0.25, 0.125, 2, 4 and 8 were not scaled properly back to
1, instead they remained 0.5 and 2, respectively. This was a '<' vs.
'>=' respective '<' vs. '<=' issue. No other values are affected
(neither getting slower nor faster), but the ones in question (incl.
their multiples like 20, 80, 0.0125 etc) are now tremendously faster -
about a factor of 30 to 60! :-)
* removed some crufty logic from _log_10() and made the special cases of
2, 10 and 0.1 slightly faster. This also helps log($x,2) and log($x,10).
* bfac() slightly faster for small arguments
* downgrading to bigint failed for .2e2 (produced 200 vs. 20)
1.40 2003-09-23 Tels
* bstr(): removed unnec. BigInt math and inlined is_zero() => great speedup
(10% to factor 6.5 depending on input)
* replace $self->_one() by $self->bone()
1.39 2003-07-06 Tels
* $x->blog($base) can handle a $base which is a Math::Bigint
* replace die() with Carp::croak
1.39 2002-11-03 Tels
* $x->bpow($y,0), $x->blog($base,0) and $x->bdiv($y,0) were still not doing
the right thing and no tests caught it *sigh*
* blog():
+ MUCH faster when $x > 10 or $x < 0.1 (constant time vs.
time * 10 when doubling/halving $x)
+ also much faster if $x has many digits (like 1/3 or 123**123)
+ for $x < 1 and $x > 0 did not work at all (bacmp vs bcmp)
+ returns now NaN if $base <= 0 or $base == 1
+ does handle other bases than "undef" (aka e) properly now
* require Math::BigFloat did not work (opposed to BigInt, where it does)
* _pow() suffered the same bug of bacmp vs bcmp (so 0.2 ** 0.2 failed)
* removed unused _pow2() routine
* _find_round_parameters() returns ($x,$a,$p,$r) and not ($a,$p,$r), so
use it correctly, and also test for $x = NaN afterwards
(happens when $a and $p were set and thus $x became NaN)
* bsqrt() failed since v1.63 for values like 0.2, 0.002, 0.00134 etc
* added broot() method (albeit slow for now)
* $x->is_one('-') was broken (never returned true for $x == -1)
* config() can take arguments and set them, croak on wrong ones
* config(trap_nan => 1) to manipulate former $NaNOK variable
* config(trap_inf => 1), too
* trap_nan/trap_inf really croak on any attempt to create an NaN/inf
* spellings of Bigint => BigInt
* simplify config() by using SUPER::config()
1.38 2002-09-08 Tels
* fix that bsqrt() would hang for certain inputs. Instead of using Newton's,
we now rely on the fact that sqrt(x*y) = sqrt(x) * sqrt(y) by setting y to
100. This removes the while loop entirely and makes it much faster while
fixing the bug at the same time.
* $x->bsqrt(0) did needless warn about undef values, and round to 4 digits
instead of beeing equivalent to $x->bsqrt(undef)
* ditto for $x->bpow($y,0), $x->blog($base,0) and $x->bdiv($y,0)
* use File::Spec was needless, since it was required later on again
1.37 2002-08-20 Tels
* bcmp()/bacmp() upgrade now if requested
1.36 2002-08-13 Tels
* as_hex() and as_bin() work now at least for inf, NaN and integers
* fixed bsstr() (and thus also numify()) for negative numbers - Ouch!
* $x->new("0.02"); $x->accuracy($a); $x->bdiv($y,$d) failed to round
when $d > $a
* numify() returned '+inf' instead of 'inf'
* (more) tests for bsstr(), numify(), as_hex(), as_bin
1.35 2002-07-07 Tels
* bfround() used accidentally BigInt math; is now about 5.6 times faster for
small numbers
* bdiv()/badd() etc skip objectify() if possible and are thus faster
* doc for accuracy()/precision()
* $x->bmod() was not modifying $x in place when returning NaN/inf/-inf
* avoid unec. calls to objectify() for binary op's
1.34 2002-06-10 Tels
* upgrade used badd() instead of bmul() inside bmul() (again! arg!)
1.33 2002-06-09 Tels
* import() fixed for older Perls
1.32 2002-05-19 Tels
* upgrade used badd() instead of bmul() inside bmul()
* bpow() now uses slower, but more correct way for fractions (this needs work)
1.31 2002-03-03 Tels
* bpow() can handle second arguments beeing non-integer (f.i. 2 ** 0.2)
* $x->bpow(0.5) optimized to $x->bsqrt();
1.30 2002-02-25 Tels
* bug in bsub() with not rounding when $x->bsub(0) was also in MBF
* bcmp() and bacmp() 5 times faster due to numify() (might have now impose a
limit on exponent - but I couldn't find a test that breaks it)
* streamlined ffloor() and fceil()
* fixed bug in $x->bsub(0) and $x->badd(0) (both forgot to round result)
* new() downgrade integers if $downgrade is in effect
* optimized fpow() (one is_zero() less)
* optimized as_number (nearly twice as fast)
* $x->badd(0) forgot to round $x
* downgrade and upgrade are valid methods for inheritance
1.29 2002-02-24 Tels
* overload for 'log' now inherited by BigInt
* _binf(), _bnan(), _bone() and _bzero() instead of longer bone() etc
* inf/NaN fixes from v1.51 were missing for BigFloat
* bdiv() upgrades if applicable
1.28 2002-02-16 Tels
* fixed use Math::BigFloat ':constant';
* fixed flog() function to calc right result, honour rounding-globals
1.27 2002-02-10 Tels (forgot to increase version)
* ffac()
* various: disable Math::BigInt::upgrade to avoid deep recursion
1.27 2002-01-06 Tels
* overload for log() and flog()/blog()
* bzero()/bone() handling of A & P was broken
* bround()/bfround() handling of zeros forgot to set A & P
* fdiv: fixed a bug in round to A with given round_mode (always used global)
* fsqrt(): would hang/fail if either $x's or global A or P were set
* fsqrt() didn't modify $x sometimes, but returned a new reference
* fsqrt(): calc 4 more digits for rounding, not 1 (endless looping otherwise)
* fmod() now actually works
1.26 2001-12-06 Tels
* fneg() failed (now hand up to MBI)
* frsft() and flsft() were no aliases to brsft() and blsft()
* fone() was no alias for bone()
* blsft() and brsft() were missing altogether
* streamlined: fpow() and fmul()
* removed the EXPORT_OK
* fqsrt() uses now BigInt::bsqrt() as guess: greatly improved performance
* make fsqrt() subclass proof by using $self instead of Math::BigFloat
* bzero(), bone(): take additional A and P and store 'em
* bnan(), binf(): clear A and P
1.25 2001-11-18 Tels
* streamlining fixes in new() were missing
* further streamlining in new() for 12345e1234 cases (fraction part empty)
* added $rnd_mode support for compatibility
* replaced the 'laber schwad blah blah' pod section by a pointer to MBI
1.24 2001-11-11 Tels
* bacmp() fix for +-inf
* streamlined new()
* faster finc()/fdec()
1.23 2001-10-05 Tels
* fixed facmp() (was broken the same way as fcmp())
* more rounding fixes from John P.
1.22 2001-10-03 Tels
* Quite a lot of rounding fixes
* $x->bnorm() is 4 times faster if $x == 0
* $x->bround($n) is 43 times faster if $n > $x->{_a} (no-op)
* added as_number()
1.21 2001-09-03 Tels
* serious bug in bcmp() caused 1.5 to be greater than 2. Yikes!
* bcmp() did not only return -1,0,1 and undef but other values, too
* new('inf') produced NaN (was expecting '+inf')
* exponent(), mantissa() & parts() failed or returned scalars for inf,-inf,NaN
* include finf in AUTOLOAD list
1.20 2001-08-03 Tels
* streamlined bcmp
* drop leading '+' for inf
1.19 2001-08-02 Tels
* 123/+-inf => 0, test for that and -1,0 / NaN => NaN
* +123 / 0 => +inf, -123 / 0 => -inf (was missing in MBF)
* fixed +-inf handling in bacmp/bcmp/bsub/badd/bdiv and tests for that
* padd bstr() output of numbers with set A or P
* remove bfloat() (Math::BigInt->bfloat() did not work, anyway, see bint())
1.17 2001-07-15 Tels
* applied Philip Newtons spelling and doc patch(s)
* added bone()
* tests for bnan() and bone()
1.16 2001-07-09 Tels
* is_positive(), is_negative()
* various pod fixes (overlong =item, spelling erorrs etc)
* removed internal _set() and the tests for it
* infinity support for fcmp(), fpow()
* nailed the bug in fdiv() that caused fsqrt() to fail. fsqr() works now, too.
* more tests
1.15 2001-06-15 Tels
* added bfloor(), bceil()
1.14 2001-06-13 Tels
* accuracy/precision rounding after fdiv() was missing
* binary integer input (0b01110 etc)
* A/P rounding after fdiv() was missing
* '-0x0' would wrongly leave '-0'
* as_number() was wrong for negative numbers and had no tests
* added is_even(), is_odd(), _set(), the inherited ones were broken
* fixed is_zero() for NaN
* $x->bpow($y) for negative $y was unfinished
* added is_inf(), binf() and some support for +-inf in new(), bsstr() etc
* added tests for is_odd(), is_even(), _set() and is_zero(), is_inf(), bsstr()
1.13 2001-06-09 Tels:
* adjusted fdiv() so that it now works proper with old testcases
* (except a few nits, see testsuite and ACCURACY)
* fdiv() in listmode (uses non-working fmod())
* fixed/test A/P after each op
* $x->accuracy(), $x->precision() actually round $x to the value A/P
* fixed fpow(), added tests for it
* hexadecimal integer input (0xdeadbeef)
* is_one() for -1 was wrongly true, tests for is_one()
1.12 2001-05-11 Tels
* taken over testsuite from John P.
* added tests for compare with fraction
* fixed fcmp/fround/ffround
* added accuracy/precision/fallback/round_mode
* bsstr('NaN') returned 'NaNeNaN'
1.11 2001-05-09
* bug bcmp() (1e-08 was < 0, aka fractions were broken)
1.10 2001-05-07
* Tom's round fixes (minus one nit)
* new: .xxx, -.xxx, +.xxx etc are valid inputs, while '.', 'x x x' and 'Exxx'
are now invalid
* finally got rid of C&P of overload section and clone()
1.09 2001-04-23
* length() in list context return length of mantissa & exponent
* bug in bstr() for '0.x' style strings
* added bsqrt()
* workaround for Perl v5.6.0 overload-bool bug (via MBI)
* fixed rounding
1.08 2001-04-18
* exponent(), mantissa() and parts() now return BigInt's
* bnorm: 0Ey => 0E1 (was wrongly 0E0)
* fixed is_zero()
* added bround() and bfround() (only truncate mode)
* fixed bug in bstr() for 1.203E-2 style numbers (Thanx Tom!)
1.07 2001-04-07
* bug in bstr() for 0.xxx style numbers, as well as for "-xxx"
* babs(), bneg(), bint() work now
* empty stubs for bsqrt(), bround() and bmod()
* exponent(), mantissa(), parts() work now as expected
1.06 2001-04-05
* bstr() returns NaN for NaN's
* renamed _norm to bnorm, added it to AUTOLOAD for compatibility
* fixed bug Math::BigFloat->new(Math::BigInt->new(3));
* bug mul/div when second arg was BigInt
* bdiv() works now with precision
* precision()
* doc about mixing different objects in overloaded math
1.05 2001-03-31
* fixed bstr() and bsstr()
* added AUTOLOAD for fxxx() to work as well as bxxx()
* enhanced and fixed testsuite for mul/cmp/add/new
1.04 2001-03-27
* bmul/bdiv/cmp work now, better _norm()
1.03 2001-03-06
* layed more foundations (mul() etc)
1.02 2001-02-24
* add()/sub() should work now
1.01 2001-02-22
* new() and bstr() work now (sort of)
1.00 2001-02-18
* started work
##############################################################################
Math::BigInt:
1.99 2010-11-15 rafl
* Stop as_int/as_number from losing precision (Peter John Acklam)
(Closes: RT#43694)
* Fix Math::BigInt::Calc::_modpow for (0 ** $x) % $y, with $x > 0
(Peter John Acklam) (Closes: RT#62918).
* Stop $x -> bmodpow(1, 1) from failing when $x is large (Peter John Acklam)
(Closes: RT#62949).
1.98 2010-11-08 rafl
* Fix from_bin() documentation error (Peter John Acklam) (Closes: RT#61845).
* Make as_int($inf) return inf, not NaN (Peter John Acklam) (Closes RT#62101).
* Fix various typos in documentation and tests (Peter John Acklam)
(Closes RT#62643).
* Make digit($n) return 0 for "out of range"-digits (Peter John Acklam)
(Closes RT#61812).
1.97 2010-11-07 rafl
* Reorder the list return of Math::BigInt::Calc::_base_len() (Nicholas Clark)
This change requires an update of Math::BigInt::FastCalc to version 0.24.
* Fix segfault when upgrading irrational numbers (Father Chrysostomos)
1.96 2010-09-28 rafl
* Various documentation fixes provided by gregor herrmann
1.95 2010-09-14 rafl
* Re-upload v1.94 as a stable release
1.94 2010-09-13 rafl DEVELOPMENT RELEASE
* Attempt to fix Math::BigInt::Lite failures
1.93 2010-09-13 rafl
* Depend on perl >= 5.6.2
* Remove obsolete core test directory boilerplate
* Convert from Test to Test::More
1.92 2010-09-10 rafl
* re-upload v1.91 with a fixed SIGNATURE
1.91 2010-09-10 rafl
* fix various documentation bugs
1.90 2010-09-03 rafl
* fix bnok() for k==0 and k==n-1
1.89 2008-04-20 Tels
* fix #35238: batan2() handles inf/+inf wrong
1.88 2007-09-22 Tels
* fix wide ints on Perl v5.8.0 (Thanx zefram!)
* minimum required is Perl v5.6 (tested by zefram)
* _find_round_parameters(), _scale_a() and _scale_p(): trunc A/P to integers
* fix from_oct(), from_bin() and from_hex()
1.87 2007-06-30 Tels
* fix undef base in blog()
* support config('lib') as shortcut for config()->{lib}
* _find_round_parameters(): convert $a & $p to normal scalars, or bad
things will happen during rounding of BigFloats
* add bpi(), bcos(), bsin(), batan(), batan2() methods
* add bmuladd()
* streamline the is_xxx() and copy() methods
1.86 2007-05-05 Tels
* bump version
1.85 2007-05-05 Tels
* bump version
1.84 2007-05-04 Tels
* add bnok() method (n over k)
1.83 2007-04-16 Tels
* bump version
1.82 2007-04-09 Tels
* use $CALC->_zeros() directly (instead _trailing_zeros()) to speed up
exponent() and mantissa()
* fix documentation that blsft() and brsft() default to base 2 (not 10)
* add bexp() and fix overloading for exp()
1.81 2007-03-16 Tels
* no code change, just a package update
1.80 2007-03-04 Tels
* require Perl v5.6.2 as minimum
* fix bug #24969 (Can't use an undefined value as an ARRAY reference)
* fix bug #12857: Subclasses and overload
* fix bug #13866: NaN (in bignum queue)
* fix bug #21586: Incorrect result when comparing with NaN
* fix bug #15896: "==" overloading is broken for "NaN"
1.79 2007-02-02 Tels
* fix typos
1.78 2007-01-27 Tels
* implement "try" and "only" as replacements for "lib"
* make 'use Math::BigInt lib => "foo"' warn if foo cannot be loaded and a
fallback occurs
* fix bug #21446 - Docs/code inconsistency for bnorm() method
* fix bug #21964 - A patch to include a rounding mode of 'common'
* fix bug #21445 - Documentation error for exponent() method
* fix bug perl #41050 - NaN returned when raising integer value to negative
power
* add from_hex(), from_oct(), and from_bin()
* add as_oct()
1.77 2005-05-17 Tels
* bump version
1.76 2005-04-10 Tels
* fix rounding doc, add notes about prevision vs. accuracy
* trap inf and -inf in new()
* load FastCalc as default
1.75 2005-03-20 Tels
* use a trick to remove the dependency on Scalar::Util in bsub()
* fix atan2(), it did not preserve the order of arguments
(Thanx to Ambros & Zaxo for report and patch!)
1.74 2005-01-01 Tels
* streamline _scale_a() and _scale_p() for more speed in rounding
* remove the now unnec. support for MB_NEVER_ROUND and {_f}, this
makes all ops that call round() a tad faster (one exists is
removed) and shrinks the codesize a bit
* streamline bneg(), inline is_zero(): makes it 1.6 times faster
* replace ref($_[0]) w/ undef when it isn't actually needed. This
makes some ops (bsstr(), bneg etc) about 2% faster for small numbers
* restrict low-level math library names to sane chars to avoid
exploitation of eval()
* fill_can_cache() accidentally did checks for 'or' & 'xor'
* inline _fill_can_cache
* add _register_callback() to notify subclasses of lower math lib changes
* bgcd() is now about 10% faster
* is_positive(0) == 0, since 0 is neither positive nor negative
* streamline bmod() a bit
* fix blog() constructing arguments (broke Math::BigInt::Constant)
1.73 2004-10-10 Tels
* overloading of <<= and >>= makes these ops about 10% faster and fixes the
problem that "$a <<= 2" would create a different object for $a to point to
* quite a lot of fixes for NaN/inf handling in bpow() (bmul already did it
right) - bug report by jeff at thekidders com and Hugo - Thank you!
1.72 2004-07-13 Tels
* no changes
1.71 2004-07-08 Tels
* fixed bsub() failing under $x -= $x; Thanx Peter J. Acklam!
* _scan_for_nonzero() reuses length/stringform of $x and is thus faster, this
helps rounding if the number after the roundposition is '5'
1.70 2004-03-12 Tels
* bpow() computed -X ** Y wrong for Y that are odd
* 0 ** -Y => +inf (was NaN) due to 0 ** -Y => 1/0**Y => 1/0 => +inf
* fixed bug in perl -Mbignum -le 'print 2 ** 46 * 3' under Bigint::Lite
leading to "Can't use an undefined value as an ARRAY reference at
/usr/local/lib/perl5/5.8.2/Math/BigInt/Calc.pm line 462."
* fixed upgrading of blog() with base = undef (means: base e)
* make the synopsis actually runnable (Thanx Paul McCarthy)
* blcm(): handle a list of strings (instead one obj and some strings), too
1.69 2004-01-13 Tels
* bacmp(+-$x,-inf) was wrong (Thanx William T. Morgan!)
* digit($x,$y) segfaulted under 5.6.1 if $y was a BigInt
* blog() was missing the modify() check (breaking MBI::Constant)
* delete $x->{_a} vs. $x->{_a} = undef to save memory
1.68 2003-12-26 Tels
* bfac(inf) is inf, not NaN
* added alias names: as_int() (as_number()), is_pos(), is_neg() and doc
* factored out all the emulation code and moved it to Math::BigInt::CalcEmu
* binary/hexadecimal input was twice as slow as v1.66 due to a typo in v1.67
* streamlined overload for boolean context (20% faster "... if $x;")
* round() was missing a croak() in path testing for wrong roundmode
* badd(): optimize away setting of sign if it is already right
* bdec() is about 10% faster for negative numbers
* bpow(): removed some now needless tests for 0 and 1: about 30% faster
for small numbers
* streamlined exponent() (parts() benefits from this, too)
1.67 2003-12-02 Tels
* overload for cos/sin/exp/atan2 to make cos(Math::BigInt->new(...)) work
* implemented blog() with a simple and fast "iterative" method
* use _log_int() in $CALC if possible
* cache $CALC->can(...) calls in global %CAN hash for speed
* reorder is_zero() check for band(), bior() and bxor() to speed up the
case for when the underlying lib has _and(), _ior() and _xor()
* implement a new way of emulating AND, OR and XOR, this tremendously
helps if band() et. al. are called with negative arguments
* try to call _signed_or(), _signed_and() and _signed_xor() in lib
* is_foobar() methods are slightly faster
* bnot() is about 12% faster
* bsqrt(): moved is_zero() || is_one() test out of the way => 28% faster
for "small" values (Calc and GMP)
* small change for overload::constant
* bfac(): do 0 or 1 check only if CALC cannot do _fac() (thus faster)
* removed a needless _copy in bmod() with negative arguments (slightly faster)
1.66 2003-09-01 Tels
* document accepted inputs better
* fix wrong upgrade and undef-parameter handling in broot()
* implement broot() if lib doesn't have a _root() routine for $y that are
powers of two and for small $x
* warn if broot() cannot yet compute proper result
* remove needless _one(): 3% speedup for binc()
* remove needless _swap(): 1% (Calc) - 6% (GMP) speedup for overloaded math
1.65 2003-07-13 Tels
* document that config() can set certain values
* replace die() with Carp::croak()
* remove needless is_zero() check in as_bin() and as_hex(), making them
faster, especially when under a different lib like GMP.
* Fixed the infinite recursion in bignum. See http://xrl.us/k6y
* fix handling of 0e999, 0e-999 etc
1.64 2002-11-03 Tels
* removed needless "my $c = ...;" statements in binf() and bnan()
* forgot () around "$x->{_f} & MB_NEVER_ROUND"
* bsqrt(inf) == inf, not NaN
* $x->bdiv($x) did not round the resulting 1 properly
* removed the shortcut testcode in bdiv() (Calc handles this now)
* added (non-working for now) broot() method
* changed length() to CORE::length() in two places (thanx Liz!)
* config() can take arguments and set them, croak on wrong ones
* config(trap_nan => 1) to manipulate former $NaNOK variable
* config(trap_inf => 1), too
* trap_nan/trap_inf really croak on any attempt to create an NaN/inf
* spellings of Bigint => BigInt
* _find_rounding_parameters(): set $a to undef if it is 0
1.63 2002-09-08 Tels
* bsqrt() did not modify $x but returned new object when lib does not have
a _sqrt() routine (BareCalc, BitVect and Pari are affected, Calc, FastCalc
and GMP were not)
1.62 2002-08-21 Tels
* bcmp()/bacmp() upgrade now if requested
* bmodinv() uses an all-positive algorithm, speeding it up by about 5-8%
and allowing to implement the same algorithm in Calc for factor 4 speedup
1.61 2002-08-13 Tels
* tests for bsstr()/numify() with negative/special inputs
* bround() keeps $scale as scalar for speed and less problems
* fix for trailing newlines in input
* some doc fixes (especially return values of is_foo() methods)
* make testsuite so that it will pass under FastCalc easily
1.60 2002-07-07 Tels
* shortcuts to avoid calls to objectify for add/sub/mul/div/mod/pow/bcmp etc
* fix overloaded bcmp() so that the objectify()-avoidance kicks in
* avoid calling round() when BigFloat requested 'no rounding please'
* bcmp()'s shortcut for comparing x <=> 0, 0 <=> 0, 0 <=> $y was making things
slower than just handing the compare to Calc. Even more so for Pari et al.
* $x->accuracy() and $x->precision() returned undef, instead of 0 if
A/P of $x was 0 and global A/P was undef.
* $x->bmod() did not modify $x in place when returning NaN/inf/-inf
* some binary ops (band/bxor/bior/bpow) were not properly rounding the result
to the requested A/P/R; the same ops also forgot to take $y into account
* doc for accuracy()/precision()
1.59 2002-06-10 Tels
* pod fixes for bmodpow()/bmodinv()
* fix in as_hex() and as_bin() for older Perls
* speedups in bpow(), bmodin() and bmodpow()
1.58 2002-06-09 Tels
* invalid inputs with two dot's (1.2.3 or 1..2 etc) are now really invalid
1.57 2002-05-30 Tels
* fixed objectify() to make "perl -Mbigrat -le 'print 1+2/3'" work
* added bmodpow() and bmodinv() as (not-working yet) stubs
1.56 2002-03-17 Tels
* documented config()
* simplified import() logic a bit
* changed some isa->($upgrade) => !$isa->($self);
1.55 2002-03-17 Tels
* :constant picks up binary/hexadecimal constants
* Math::BigInt->digit(123) works now
1.54 2002-03-03 Tels
* really fixed overlong pod =item
* downgrade() and upgrade() with undef as argument didn't clear the variable
* bmul() upgrades if second argument is non-integer
* bdiv() upgrades if $x > $y
* bpow() upgrades if second argument is non-integer
* objectify disable downgrade (for MBF)
* new() twice as fast due to shortcut simple numbers, save _split() & _round()
1.53 2002-02-27 Tels
* precisision typo
* fixed overlong pod =item
* added downgrade()
1.52 2002-02-24 Tels
* hooks for _bin(), _bnan(), _bone() and _bzero()
* =head2 section for accuracy
1.51 2002-02-16 Tels
* fixed bfround(-x) (f.i. 0.004->bfround(-2) resulted in 0.01, not 0.00)
* bfround(x) rounded at wrong place (off by one)
* calling bfround(x) rounded further and further instead of keeping result
* blog() upgrades if requested
* added doc stub for every public function
1.50 2002-02-10 Tels
* bfac() and hook for _fac() in libs
* documented sub-classing and auto-upgrade
* < 4 test in bsqrt() after the CALC call for more performance
* added overload for sqrt()
* added possibility to upgrade via use Math::BigInt upgrade => 'Foo::Bar'
* Math::Big(Int|Float)->accuracy() clears precision, and vice versa
* small optimization in bdiv() regarding abs($x) < abs($y)
* brsft() for negative numbers in base 2 was completely wrong
1.49 2002-01-07 Tels
* as_hex() and as_bin() use 16 instead of 8 bits per iteration
* overload for log() and blog()
* tricks to make 'require Math::BigInt' and 'use Math::BigInt();' work again
* use $CALC instead of require for newer Perls (test for $] > 5.006 vs 5.6)
* bzero()/bone() handling of A & P was broken
* bround()/bfround() forgot to set A or P for zeros
* embedded _find_round_parameters into round(), streamlined both versions
* round() now uses string-add to make it almost twice as fast
* bnot() did round twice
1.48 2001-12-06 Tels
* fixed pod in many places
* bmod: use round(), not bround()
* bsqrt: use _sqrt() from lib, if possible
* bsqrt: would hang for certain (most?) inputs
* bdiv: slow check for 1 || -1 replaced by much faster version
* bdiv: call _div() only when nec. in list context, otherwise scalar
* streamlined copy(), _find_round_parameters()
* removed the EXPORT_OK except for objectify, _swap and bgcd/blcm
* bzero(), bone(): take additional A and P and store 'em
* bnan(), binf(): clear A and P
1.47 2001-11-18 Tels
* added $rnd_mode support for compatibility
* two 'my $t = ... if ..;' cases to 'my $t; $t = ... if ...;'
* added overload for %=, |=, &= and ^= for more speed
* _split(): check for 1e2e3 and reject it
1.46 2001-11-11 Tels
* binc(),bdec() use lib (via _inc(),_dec()) => faster (see BENCHMARK)
* avoid the unnec. rounding bsub()/binc()/bdec() (badd() already took care)
* made bsub() faster by removing the bneg() overhead from it
1.45 2001-11-04 Tels
* tests run now in subclass, too
* bmod() can use _mod in lib
* lots of tests fixed (assumed wrong base etc) and added
* bpow() about 10-15% faster for small numbers (like 2 ** 150, 3 * 200 etc)
1.43 2001-10-05 Tels
* $x->bround($n) is 43 times faster if $n > $x->{_a} (no-op)
* Heaploads of rounding fixes (and tests)
* Test for 99999-bug in Calc
1.42 2001-09-03 Tels
* bug in overload section causing performance losses in subclasses
* call $CALC->import() with list of libs
* odd numbers never have trailing zeros, so don't convert them to DEC to look
* as_hex() and as_bin()
* $x->bmod() did not modify $x, only returned result. Oups.
* new('inf') produced NaN (was expecting '+inf')
* exponent(), mantissa() & parts() failed or returned scalars for inf,-inf,NaN
1.41 2001-08-08 Tels
* fixed inf test (coredumps)
1.40 2001-08-03 Tels
* bxor(-$x,-$y) was broken (and not tested *sigh*)
* streamlined bcmp
* drop leading '+' for inf
* bxor(), band(), bior() with negative arguments don't get passed to lib
(makes it work with BitVect, Pari, GMP etc)
1.39 2001-08-02 Tels
* fixed history (duh!)
* assign return values from $CALC back to $x->{value}
* fixed +-inf handling in a lot of places and tests for that
* band(), bxor() and bior() now work with negative inputs
* remove bint() (Math::BigFloat->bint() just DNDWIM and no sense, either)
1.38 2001-07-15 Tels
* test for mul() shortcut
1.37 2001-07-15 Tels
* applied Philip Newtons spelling and doc patch(s)
* Benjamin Trott: _split() is faster for numbers that need no splitting
* Benjamin Trott: don't take shortcut in badd(), or Pari won't work
* allow use Math::BigInt lib => 'Pari,BitVect,Foo,Bar';
* delegate shifting to CALC if possible, otherwise fallback
* test for self-pow, to see if lib's fail (since BitVect failed for self-pow)
* _one() => bone()
* +x / 0 => +inf, -x / 0 => -inf, while 0/0 and +-x % 0 are still NaN
* tests for bnan() and bone()
* Math::BigInt::Calc now determines biggest $BASE to use. Default should now
be 1e7 on most systems, giving 20% to 40% speedups.
1.36 2001-07-04 Tels
* is_positive(), is_negative()
* various pod fixes (overlong =item, spelling erorrs etc)
* torn out the bones from under the flesh and moved them to Math::BigInt::Calc
* added Math::BigInt::Calc, Math::BigInt::Small (and Math::BigInt::BitVect)
* fixed tests for bacmp() (could never fail)
* removed internal _set() and tests for it
* +-inf handling in bcmp(), bpow()
1.35 2001-06-15 Tels
* added bfloor(), bceil()
* fixed bior(), bxor(), band() for $x->bxxx(NaN,0), added modify() to them
1.34 2001-06-13 Tels
* binary integer input (0b01110 etc)
* fixed: '-0x0' left '-0'
* added is_inf(), binf() and some support for +-inf in new(), bsstr() etc
* added tests for is_odd(), is_even(), _set() and is_zero(), is_inf(), bsstr()
1.33 2001-06-09 Tels
* bround() no longer uses 10 ** $pad and is thus much faster when rounding up
* fixed and added rounding benchmark (did time bmul instead bround)
* blsft(),brsft(): can work in different bases, check against invalid
inputs, more tests, speedup when in base 10
* _trailing_zeros is 50% faster
* A/P after each op, tests for it in accuracy.t
* round() instead of bnorm()
* $x->accuracy(), $x->precision() actually round $x to the set value
* tests for is_one()
* hexadecimal integer input (0xcafebabe etc)
1.32 2001-05-11 Tels
* added accuracy/precision/fallback/round_mode
1.31 2001-05-08 Tels
* _ between digits now accepted, ' ' no longer valid inside (but at front/end)
* Exxx is NaN, and no longer produces warning
* .xxx style numbers are valid input
* tests for 1E1, 123E-2, 1E2 etc style input to Bigint.pm
* fixed overload (w/ _swap/copy), subclasses can inherit it easily
* removed clone()
* added bsstr()
1.3 2001-04-23 Tels
* added (compatible to MBF) mantissa(), exponent() & parts() as well as tests
* _trailing_zeros()
* fixed as_number() to return copy of BigInt
* added bround(), bfround() and support for round_mode() as well as $rnd_mode
* fixed bug in bdiv() wich left reminder "-0", causing further op's to die()
* added is_valid to testsuite to see whether invalid objects are created
* added bsqrt()
* workaround coredump bug in bool() for v5.6.1
1.23 2001-04-07 Tels
* spelling errors in pod
1.22 2001-04-05 Tels
* documented Peters OS/390 patch/changes (fix was in for quite some time)
* fixed bug Math::BigInt->new(Math::BigFloat->new(3));
* objectify() with other objects than BigInt as further args, copy() etc
* $x->digit($n) to query fast value of Nth digit
* as_number()
1.21 2001-03-30 Tels
* bool() works now under 5_005
* bug in bsub where numbers with at least 6 trailing digits after any op failed
1.20 2001-03-24 Tels
* added: is_nan()
* bug in bmod/bdiv, I forgot some cases with negatives. Thanx to Bruce Fields!
* documented ':constant' and eval() crash on Perl 5.00x
* documented BigInts behaviour of bmod/bdiv and use integer
1.16 2001-03-09 Tels
* Math::BigInt::badd(4,5) and Math::SomeChildOfBI->badd(4,5) work now
* '$x = scalar (**|%|+|-|*|\) $object;' failed (was not tested, either)
* 'if ($x)' is now O(1) instead of O(N) and at least twice as fast
* fixed nasty bug in _digits that caused <=> after add/sub/mul etc to fail
if result was between 100001 and 109999, added test for this
* added test cases for op's that should preserve args (+,+=,abs(), neg() etc)
* added tests for overloaded 'bool'
* added test.pl and some examples (prime.pl, bigprimes.pl)
* tests after "use Math::BigInt :constant" were screwed due to not using eval
* $x->numify() (for $array[$x] = 0; etc) is much faster now
* added caveat documentation for $x = -$x; and $x *= string1 operator string2;
1.15 2001-02-24 Tels
* $x / $x is now a lot faster (more O(1) than O(N))
* 10 ** $x is now a lot faster (more O(N/5) instead of O(N))
* overload of **= makes $x **= $y faster
* 0 ** 0 was NaN, not 1
* -a % b = +c (was -c) to be compatible with perl
* added $x->length() and test for it; fixed _digits() (was off by 1)
* objectify() was not exported, added tests for objectify()
1.14 2001-02-21 Tels
* overload +=, -=, *= and /= for about 20-30% more speed if both args have
roughly same length
* shortcut in add() makes $x += $y; $x -= $y; for large $x and small $y
an O(1) case instead of O(N)
* fixed (non-critical) bug that caused objectify in numify/bool/stringify to
create scratch objects from undef params.
1.13 2001-02-18 Tels
* got rid of duplicated copy() code in new()
1.12 2001-02-16 Tels
* accidentally dropped self-multiply test in bigintpm.t
* fixed bug in overloading cmp
* after correcting the overload for 'cmp', I got a lot of test failings and
finally discovered that the bstr()'s return of '[+-][0-9]+' instead of
Perls ways of '[-]?[0-9]+' breaks string comparisons with numbers :(
F.i. ok() from Test.pm uses 'eq' and you can not do ok($a,3*3) where $a
is a BigInt. IMNSHO clearly wrong. And only changing the way cmp is
overloaded would lead to the curios situation that the following:
'print "$a eq $b" if $a eq $b;' would print "+3 eq 3", which looks wrong.
Mark B. said go ahead and change bstr(), so I changed it ;) to drop
the '+', adapted all the tests, changed the doc, etc.
BigInts behave now transparently like build-in scalars in integer/string
context ;o)
1.11 2001-02-14 Tels (first release)
* fixed bug in band(), bxor(), etc that used badd($x, fixed_number_here);
* since subclasses might not be happy with fixed numbers, make sure we pass
BigInts all the time if using something like $someclass->badd();
* fixed bug in band/bxor/bior which destroyed second argument
* bxor/band/bior work now correctly for subclasses
* ++ and -- are now a tad (ca 5%) faster
1.10 2000-11-24 Tels
* finally made it Math::BigInt (w/o trailing 's')
1.09 2000-11-23 Tels
* fixed bug in bmul (and thus bpow) (self multiply works now)
1.08 2000-11-22 Tels
* fixed all but one test (band bior bxor etc)
1.07 2000-11-20 Tels
* objectify fixed to not make copies and work with subclasses
1.06 2000-11-19 Tels
* 7 tests remain
* bgcd accepts lists, added blcm
1.05 2000-11-16 Tels
* 8 tests remain
* new copies _all_ fields, not only Math::Bigint ones
1.04 2000-11-15 Tels
* fixed bigintpm to test '++' and '--' properly
* done div, fixed mul/bpow (13 tests remain)
1.03 2000-11-14 Tels
* x**0 => 1 (instead of x)
* fixed bigintpm to include bpow, binc, bdec, new() test
1.02 2000-11-13 Tels
* fixed sub and mul (sort of)
* found out that "$wanted = shift || return bzero()" causes a call to numify,
* testing for undefined fixes this problem (but might waste more time for
* a new(0), will save time on average.
Zerion Mini Shell 1.0